Pgs950sefss Parts

This igniter cover is a replacement protective shield that helps protect the oven igniter from food spills and debris, extending the igniter's service life and helping the burner ignite reliably. What it does:

• Shields the oven igniter from direct contact with spills, drips and falling debris
• Helps prevent premature igniter damage that can lead to ignition problems
• Can reduce the chance of shorting or erratic ignition caused by contamination
• Matches original shape to ensure proper fit and clearance around the igniter

• Disconnect power to the appliance (and shut off gas if applicable) before servicing
• Allow the oven to cool completely and wear gloves to avoid cuts from sheet metal
• Handle the igniter and cover carefully; avoid touching the igniter surface directly
• Test appliance operation after reinstall

The upper manifold panel is an OEM part for GE ranges. It is responsible for housing and protecting the control buttons and knobs of the range. It is designed to withstand daily use and resist damage from heat, moisture, and other external factors.

A bad upper manifold panel can result in issues such as unresponsive buttons, malfunctioning knobs, or a worn-out appearance. Causes of a bad panel can include wear and tear over time, accidental spills, or damage due to impact.

Symptoms of a bad upper manifold panel include:

• Unresponsive or sticky buttons
• Loose or broken knobs
• Faded or worn-out labeling on the panel
• Difficulty in adjusting or setting cooking functions

Replace your worn-out or damaged upper manifold panel with this genuine OEM GE part to restore your range. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

A 90° elbow assembly that redirects a fluid or discharge line at a right angle to restore proper routing and a secure connection. Simple replacement for worn, cracked, or damaged elbow fittings. What it does

• Redirects flow between two hoses or fittings at a 90° angle to enable correct line routing
• Provides a sealed connection to help prevent leaks where a straight connection won't fit
• Restores proper flow path to eliminate kinks or pressure loss caused by a damaged elbow
• Common symptom: visible leak, moisture or pooling near the elbow fitting
• Common symptom: poor or restricted flow where the line changes direction

• One 90° elbow assembly

• Turn off power and shut off the appliance water supply before starting any repair
• Inspect mating hoses and seals; replace worn clamps or gaskets for a reliable seal
• Hand-tighten then snug fittings; avoid over-tightening plastic fittings to prevent cracking
• After installation, restore water/power and check thoroughly for leaks during a test run

This LP conversion kit lets a compatible gas range be converted to run on liquid propane (LP), enabling safe, efficient operation after a change in household fuel type. Use this kit when fuel type conversion is required. What it does:

• Provides the orifices and components needed to change a range's gas flow settings from natural gas to liquid propane
• Restores correct burner jet sizing and regulator configuration for LP operation
• Helps ensure proper flame characteristics after a fuel change
• Intended for use only on models approved for conversion by the manufacturer

• Turn off the gas supply and electricity before beginning work; follow the included instructions exactly
• After installation, check all connections for leaks and verify correct burner flames and safe operation
• Do not attempt conversion on models not approved by the manufacturer for LP use

This bottom oven inner cavity liner replaces the damaged or corroded interior surface that holds racks and reflects heat for even cooking. Restores the oven's interior structure and helps maintain proper baking and roasting performance. What it does

• Provides the oven's inner cavity surface that supports racks and cookware
• Reflects heat for more consistent cooking results
• Replaces dented, cracked, or corroded interior panels that can trap grease or cause uneven heating
• Helps prevent food debris from reaching insulation and internal components

• One bottom oven inner cavity liner

• Disconnect power to the appliance before starting any repair
• Remove oven racks and follow OEM instructions to access and remove the old liner
• Handle edges carefully; use gloves to avoid cuts and protect the new liner finish
• If insulation or mounting clips are damaged, inspect and replace those items as needed

This replacement lamp cover protects and diffuses interior appliance light for even illumination and safe bulb containment. It restores a cracked, cloudy, or missing light lens to improve visibility inside the compartment. What it does:

• Protects the interior light bulb from impact, moisture, and food debris.
• Diffuses and softens the bulb's light for more even interior illumination.
• Stops rattling or falling lens issues caused by a cracked or broken cover.
• Helps prevent direct contact with the hot bulb and reduces glare.

• One lamp cover / light diffuser.

• Disconnect power or unplug the appliance before servicing to avoid electrical shock.
• Remove the old cover carefully and dispose of any broken pieces safely.
• Handle the replacement cover gently to avoid cracks; align and snap/slide into place per the original mounting.
• After installation, restore power and replace bulb if still dim or nonfunctional.

This broil burner assembly supplies the upper-oven broil flame so your oven can brown and crisp foods. It replaces a damaged or failed broil burner to restore proper broiling performance and even top-heat. What it does

• Produces the broil flame used for broiling and top-side browning in the oven.
• Replaces a cracked, warped, or clogged broil burner that causes weak or no broil heat.
• Helps restore even browning when the oven top heat is uneven.
• Works with the oven's gas supply and igniter to light and maintain the broil flame.

• One broil burner assembly.

• Turn off electrical power and shut off the gas supply before starting any service.
• Handle parts carefully to avoid damage; verify proper seating and alignment during installation.
• Check all gas connections for leaks after installation and before use.

This broil burner assembly replaces the oven's broil burner to restore high-heat broiling performance for crisping and browning foods. It installs in the oven cavity and connects to the oven's gas and ignition system for reliable broil heating. What it does:

• Provides the primary broil heat source for gas ovens to brown and crisp food surfaces
• Ignites and maintains a consistent broil flame when the broil control is selected
• Commonly used when broil element is weak, uneven, or fails to light
• Helps restore proper broiling performance after burner damage or corrosion

• One broil burner assembly

• Shut off gas supply and power to the appliance before beginning service
• Follow the oven manufacturer's service instructions and replace only with the correct part number
• Basic hand tools are typically required; confirm gas connections are secure and leak-free after installation

This burner valve controls gas flow to the 3R/310 burner on compatible gas ranges, restoring proper ignition and flame control for reliable cooking performance. Designed as a direct-replacement service part. What it does:

• Regulates gas to the designated 3R/310 burner for correct flame size and heat
• Helps resolve a burner that won't light or has a weak or uneven flame
• Replaces a worn or leaking valve that may cause pilot or ignition issues
• Restores normal burner operation when valve failure is the confirmed cause

• Turn off gas supply and disconnect power to the appliance before servicing
• Verify correct valve orientation and secure mounting per OEM instructions
• Use appropriate tools and test for leaks with a soap solution after installation