Pgs975seam Parts

This oven lamp lens is the clear glass cover that protects and focuses the interior lamp, helping keep the bulb safe from food, steam and debris while improving oven interior lighting for safer cooking and better visibility. What it does:

• Protects the oven light bulb from direct contact with spills, splatters and high heat.
• Helps diffuse and direct light for clearer visibility inside the oven cavity.
• Replaces cracked, chipped or missing lens that can rattle or allow debris to hit the bulb.
• Restores proper lamp function when the lens is damaged, reducing glare and hotspots.

• One oven lamp lens (glass).

• Disconnect power and allow the oven and bulb to cool completely before starting.
• Remove mounting screw(s) or lens holder clips, replace lens, and secure hardware snugly—do not overtighten.
• Use appropriate replacement bulb type and handle glass with care to avoid breakage and cuts.

This control panel gasket seals the appliance console to help keep moisture, grease, and debris out of the control area and maintain a tidy, responsive panel. It replaces worn or damaged seals that let contaminants reach electronics. What it does:

• Creates a protective seal around the control panel to reduce moisture and grime intrusion
• Helps prevent dirt and cooking residue from collecting under buttons and behind the console
• Reduces the chance of control panel corrosion and intermittent button response caused by contamination
• Restores a flush fit and finished appearance to the console area

• Disconnect power to the appliance before starting any repair to avoid shock or unexpected operation.
• Remove the control panel or console per the service manual to access the old gasket; follow OEM disassembly steps.
• Clean mating surfaces of old adhesive or debris before installing the new gasket for a secure fit.
• If adhesive is used, allow proper cure time and verify proper alignment before reassembly.

This bimetal limit thermostat is a safety cutoff that helps prevent ovens and ranges from overheating. It replaces a failed temperature limit control to restore proper high-temperature protection and safe operation. What it does:

• Acts as a high-limit cutoff to stop heat if the appliance exceeds safe temperatures
• Prevents excessive heating that can cause burnout or unsafe operation
• Can cause an oven or burner to stop heating or fail to reach temperature when it has failed
• Supports normal cycling of the appliance by sensing and responding to over-temperature conditions

• One bimetal limit thermostat

• Disconnect power to the appliance before inspecting or replacing this part
• Replace with the exact part number shown on the old thermostat to ensure proper fit
• Handle with care; avoid bending the sensing element or terminals

This front trim frame restores the finished edge and appearance of the appliance door or control opening, providing a clean, factory-look replacement that covers gaps and worn trim on compatible units. What it does:

• Replaces damaged, scratched or missing front trim to improve the appliance's appearance.
• Covers gaps where original trim has warped, peeled, or broken.
• Helps maintain a consistent seal line and edge protection around the door or control opening.
• Matches the original black finish to blend with the surrounding cabinet or door surface.

• One black front trim frame.

• High-level replacement; remove power and open door or panel before starting.
• Handle trim carefully to avoid scratching the finish during installation.
• Retain and reuse any original clips or screws when possible; replace only if supplied or specified.

This orifice spud directs natural gas from the valve to the burner, restoring proper flame shape and more consistent heat on compatible gas ranges and cooktops. Replace when the burner flame is weak or uneven. What it does:

• Channels natural gas into the burner orifice to create a steady, correct flame.
• Replaces a worn, clogged, or damaged spud that can cause low, sputtering, or uneven flames.
• Helps restore reliable ignition and more consistent cooking temperatures.
• Designed specifically for natural gas (NG) systems — do not interchange with LP parts.

• Turn off the appliance power and shut off the gas supply before beginning work.
• After installation, check all connections for leaks and test each burner for proper flame and ignition.

Nickel

This electronic range control is the oven's main user interface and control board, managing oven functions, timers and the display so your range responds correctly to cook settings and timers. What it does:

• Controls bake, broil, self-clean and timer functions via the front control panel
• Manages oven temperature setpoints and communicates with temperature sensors
• Powers and updates the digital display and clock/timer readouts
• Enables user inputs from the touchpad or selector knobs to activate cooking cycles
• Common symptom linkage: blank or unresponsive display, nonworking touchpad, oven not heating or not following set temperature

• Disconnect power at the breaker before attempting any service to avoid shock
• Handle the board and connector pins carefully to prevent ESD or damage
• Verify wiring connections and sensor continuity per OEM schematic during replacement

A heavy-duty cast grate assembly that restores a stable cooking surface on gas cooktops. Replaces a cracked, warped or missing grate so pots and pans sit level and heat evenly for safer cooking. What it does:

• Supports cookware over the burner for stable, even heating
• Replaces broken, cracked, warped or sagging grates that cause wobbling
• Helps prevent direct contact between cookware and burner heads
• Restores correct clearance for reliable ignition and flame performance

• Allow cooktop to cool completely before removal or installation
• Replace by lifting out the old grate and setting the new grate into place—no special tools usually required
• Inspect surrounding cooktop surfaces and burner caps for proper fit after installation

This silicon controlled rectifier (SCR) is an electronic switching component that controls current flow in appliance control circuits, helping regulate power to heaters, motors, or other loads for stable operation. What it does:

• Switches and regulates current in control boards and power circuits
• Can prevent power from reaching a heater, motor, or element when failed
• Helps protect downstream components by controlling surge/current flow

• Disconnect power to the appliance before servicing to avoid shock.
• Handle the SCR carefully to avoid electrostatic discharge (ESD) damage.
• May require board-level replacement or soldering skills.

This is a replacement screw used to secure appliance components and restore proper fit and function. Installing the correct screw prevents loose panels and noisy operation and keeps parts aligned for safe use. What it does:

• Secures panels, brackets, or small assemblies to prevent movement and vibration
• Helps stop rattling or vibration caused by missing or stripped fasteners
• Restores secure fit where a screw has been lost or damaged
• Matches the OEM fit so adjoining parts align correctly

• One replacement screw as pictured

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand first, then snug; do not overtighten to avoid cracking plastic or stripping threads
• Replace only with the same type and size screw to ensure proper fit

Package of 12

This orifice spud meters gas to a single burner for LP (propane) applications, helping restore proper ignition and stable flame performance when the original spud is blocked, damaged, or the wrong size. What it does:

• Directs and meters LP gas flow to the burner for correct combustion
• Replaces a worn, clogged, or incorrect orifice that can cause weak or uneven flames
• Helps restore consistent ignition and heat output when the burner performs poorly
• Used as part of LP fuel system/orifice configurations on compatible gas ranges

• Turn off the gas supply and disconnect power before servicing appliance
• Only install the correct orifice for your fuel type (LP);
• Use proper tools and avoid overtightening to prevent damage to the spud or burner