Prd48jdsgu Parts

The Grill Grid is an OEM part for Bosch ranges and ovens.  It sits within the grill cavity and allows for direct heat from the broiler to cook food from the top, as well as collect grease and drippings. 

Symptoms of a bad Grill Grid include:

• Warping or cracks that no longer allow it to lay flat
• Surface corrosion that has caused pitting or holes 
• Loose wires or joints that cause the grid to not secure properly within the cavity

Causes of a bad part can be normal wear and tear from high heat use over time. Grease and food particles left on the surface are also common causes of damage or corrosion. 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement electronic display for the control panel restores a clear, readable screen so you can view settings, cycle status, and alerts from the appliance at a glance. What it does:

• Shows operating status, time/temperature, and alerts from the main control
• Provides user feedback on selected options and cycle progress
• Common failure signs: blank or dim readout, missing segments, flickering, or garbled characters
• Indicators may be unresponsive even though the unit powers on

• One display

• Disconnect power at the breaker before servicing
• Access the control panel; handle the board by the edges and observe ESD precautions
• Transfer any mounting hardware and wire connectors from the original part
• Restore power and run a functional test to confirm a clear, stable readout

This screw secures appliance panels and internal components. Replacing a missing, rusted, or stripped fastener restores proper fit and alignment to prevent movement, rattling, and premature wear.

• Fastens appliance components and panels for a secure assembly
• Helps maintain proper alignment to reduce vibration and noise
• Replaces missing or damaged hardware that can cause loose fits
• Supports reliable operation after service or repair

• Disconnect power and, shut off water or gas before service
• Use the correct driver for the head type; start threads by hand to avoid cross-threading
• Tighten evenly and do not overtighten to prevent stripping or damage

A replacement glass light cover that protects and diffuses the oven interior light so you can see food while cooking. Restores proper light diffusion and keeps the bulb shielded from spills and debris. What it does:

• Protects the oven light bulb from splashes, food particles, and direct contact
• Diffuses and softens interior light for even visibility while cooking
• Helps prevent glass fragments from reaching food if the bulb breaks
• Commonly replaced when cracked, chipped, cloudy, or causing reduced illumination

• Disconnect power to the appliance before starting any work; allow the oven and bulb to cool.
• Handle the glass carefully to avoid chipping or cuts; wear gloves and eye protection.
• Installation normally requires removing the old cover and securing the new cover per the oven's light assembly—retain any mounting clips or screws.

This support is a genuine replacement that secures and aligns an associated component inside the appliance, keeping it stable and operating as intended. Replacing a damaged support helps restore proper fit, reduce vibration, and prevent premature wear.

• Provides structural mounting and support for the designated assembly
• Maintains correct alignment and spacing of parts
• Helps prevent wobble, rattling, or rubbing during operation
• Symptoms can include loose or sagging parts, misalignment, unusual noise, or visible cracks in the original support

• Disconnect power; shut off water supply before servicing
• Refer to your model's parts diagram to orientation and fastener locations
• Transfer any screws/clips from the original part if new hardware is not supplied
• Tighten fasteners evenly and avoid overtightening plastic components

This Jet is the small spray nozzle that directs a focused stream of water inside the dishwasher's wash system. Replacing a clogged or damaged jet helps restore proper spray coverage, wash pressure, and overall cleaning performance.

• Directs and meters water flow within the wash system
• Helps maintain spray arm/wash zone pressure and coverage
• Replace if clogged with mineral deposits or physically damaged
• Symptoms include poor cleaning, weak spray, unusual wash noise, or leaks near the nozzle

• Disconnect power and shut off the water supply before servicing
• Access the nozzle location and note its orientation and any seals/clips
• Clean mating surfaces; transfer any reusable seal/clip if present
• Seat and lock the jet fully; run a test cycle and check for leaks

This cap covers and protects its mating opening or fastener on the appliance, helping keep debris and moisture out while restoring a clean, finished look. Replace a cracked or missing cap to maintain proper protection and appearance. What it does:

• Provides a finished cover for an opening or fastener
• Helps prevent dust, debris, and moisture intrusion
• Supports proper fit of the assembly it mates with
• Common signs include a cracked, loose, or missing cap; exposed hardware; or difficulty securing the area

• 1 cap

• Disconnect power; shut off water or gas to the appliance before servicing
• Note the original cap's orientation; release any tabs or threads to remove
• Clean the mating area; press or thread the new cap on until fully seated—do not overtighten
• The cap is secure and that surrounding components operate normally

The Knob is an OEM part for Bosch ranges. This knob allows users to control the temperature and cooking settings on their stove or oven effectively.  

Causes of a bad knob can include prolonged exposure to heat, which can cause the material to degrade, accidental damage, or normal wear and tear that leads to cracking or breaking. 

Symptoms of a bad knob include:

• Difficulty in turning or adjusting the knob
• The knob feeling loose or falling off
• Visual signs of damage such as cracks or melting
• Failure to engage the stove or oven controls properly

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This socket is an electrical connector used to join wiring or plug-in components, restoring a secure connection for reliable appliance operation. It replaces a worn or damaged socket to help prevent intermittent power or component failure. What it does:

• Provides a secure electrical connection between wiring and the appliance component
• Restores proper contact when a loose, corroded, or broken socket causes intermittent operation
• Helps prevent arcing or poor connections that can lead to component failure
• Used where a plug-in or push-fit electrical connection is required

• One socket

• Disconnect power to the appliance before inspecting or replacing the socket
• Replace only with the exact socket type specified for your appliance

This electronic control module governs your appliance's core functions and cycle logic. Replacing a failed board restores responsive controls, reliable operation, and proper cycle progression when the original has become erratic, unresponsive, or shows error codes.

• Processes inputs from the user interface and sensors to execute programmed operations
• Sends control signals to key components as needed for each step of a cycle
• Common failure symptoms include no power or unresponsive controls
• Restores normal operation when the original control board has failed

• Disconnect power to the appliance before servicing; follow all safety precautions
• Use ESD protection and handle the board by the edges to avoid static damage
• Photograph wiring and transfer connectors one at a time; do not force locking tabs
• Some models may require running a service/diagnostic procedure after installation—follow your unit's service instructions

This transformer supplies the low-voltage power needed for an oven's interior lights so bulbs operate reliably. It restores proper lighting and helps stop flicker or complete loss of oven lamp function. What it does:

• Converts the oven's supply to the low-voltage output required by interior lamp circuits.
• Restores steady lamp operation when lights fail to come on or flicker.
• Works with the oven's light switch and control circuitry to deliver consistent voltage.
• Helps prevent false diagnostics caused by intermittent lamp power.

• One oven light transformer.

• Disconnect all power to the appliance before starting any repair.
• Accessible behind the control panel or chassis; remove panels carefully to reach the transformer.
• Note wire locations and secure all connectors; use proper wire connectors and strain relief.

This display is the user interface module that shows cycle status, settings and error indicators so you can read and control the appliance from the front panel. It restores visible feedback and menu information for normal operation. What it does

• Provides the visible display for cycle progress, timers and selected options
• Shows error codes and status messages to help identify issues
• Works with the appliance control board to update settings and user inputs
• Restores readable display after a failed or cracked panel

• Disconnect power to the appliance before starting work to avoid shock or damage
• Replacement typically requires removal of the front control or console panel; handle the display lens and ribbon connectors carefully
• Keep screws and small fasteners organized for reassembly

Replacement water inlet valve that controls an appliance's incoming water flow for reliable fill and cycle operation. Replacing a faulty valve can stop no-fill, slow-fill, or continuous-fill issues and restore normal performance. What it does:

• Opens and closes to regulate water entering the appliance during fill cycles.
• Helps ensure correct water levels for proper washing or rinsing.
• Common symptom fixer for appliances that won't fill, fill slowly, or keep filling.
• May cause visible leaks at the valve or trigger fill-related fault behavior if failed.

• Turn off power and shut off the water supply before starting any work.
• Open a cycle or relieve pressure to drain residual water before removing the old valve.
• Inspect and replace any worn seals or inlet hoses when installing the new valve.
• Follow the appliance service manual for specific removal/installation steps.

A cable harness that routes and connects power and signal wires to restore proper electrical continuity and control communication in your appliance. Replaces a worn or damaged harness to help eliminate intermittent power or control faults. What it does:

• Provides bundled wiring and connector interfaces between control boards, motors, sensors, and switches
• Restores reliable electrical connections when original wires or terminals are frayed, broken, or corroded
• Can resolve symptoms such as intermittent operation, loss of power to components, or control panel communication errors
• Matches OEM connector types and wire routing to maintain correct electrical function

• Disconnect all power (unplug appliance or switch off breaker) before starting service
• Note wire routing and connector positions during removal to ensure correct reinstallation
• Handle connectors by the housing; avoid pulling on individual wires

This temperature sensor measures oven/dishwasher temperature and provides the control board with the signal needed to regulate heating cycles for reliable cooking and cleaning performance. What it does:

• Monitors appliance temperature and sends readings to the control board
• Allows the unit to reach and maintain the correct operating temperature
• Can cause extended cycles or poor cleaning/heating when faulty
• Common symptom when failing: appliance not reaching temperature or showing related error codes

• Disconnect power (and water for dishwashers) before beginning any repair
• Access usually requires removing the outer panel or control area
• Handle the sensor and wiring gently; avoid bending or contaminating the probe
• Test with a multimeter per OEM instructions to confirm failure before replacing

This ignition cable connects the stove's spark electrode to the ignition system so burners ignite reliably. It replaces a damaged or degraded lead to restore spark delivery and consistent lighting. What it does:

• Transfers ignition voltage from the module to the burner electrode so sparks form at the burner
• Helps stop intermittent or no-spark symptoms when the wire is cracked or corroded
• Prevents arcing caused by insulation damage or improper routing
• Restores normal ignition behavior when the original cable is worn or burned

• One ignition cable

• Disconnect power and turn off gas supply before starting any service
• Inspect routing and connectors; replace only if the wire or insulation is damaged
• Keep the cable away from high-heat areas and sharp edges to prevent future damage