Prd48jdsgu Parts

The Heater Element Range is an OEM component for Bosch electric ranges. It is responsible for generating precise heat to cook foods and bake consistently.

Causes of a bad element range include scaling or mineral deposits from repeated cleanings that interfere with heat transfer. Broken coils from rough handling can also disrupt heat output.

Symptoms of a bad heater element range include:

• Long preheat times unable to reach desired heat  
• Burnt exteriors but raw interiors when baking
• Disabled or reluctant-to-heat oven and broiler functions
• Hot and cold spots causing inconsistent results

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

This valve-magnet is the replacement solenoid coil that activates the dishwasher's water control valve, restoring proper water flow control for filling and washing cycles. It helps the appliance open and close the valve when power is applied. What it does:

• Converts electrical signal into mechanical movement to open/close the water valve
• Restores proper water fill and prevents underfill or overfill issues linked to faulty coils
• Commonly used when dishwasher won't fill or cycles fail to advance due to valve activation problems
• Works with the valve assembly; does not include the entire valve body

• Disconnect power and water supply before attempting replacement
• Handle electrical connections carefully; ensure connectors are secure and insulated
• Verify orientation and seating on the valve body before reassembly

This halogen oven lamp provides bright, consistent interior lighting so you can easily check cooking progress without opening the door. It replaces a burned or dim oven bulb to restore full interior visibility. What it does:

• Illuminates the oven cavity for clear viewing of food during cooking and baking
• Replaces a burned-out or flickering oven lamp
• Helps you monitor doneness without repeatedly opening the oven door
• Fits into the oven lamp socket and powers with the oven's existing lighting circuit

• Disconnect power to the appliance before servicing to avoid shock
• Allow the oven to cool completely before replacing the lamp
• Avoid touching the bulb glass with bare fingers; use gloves or a clean cloth to prevent oil deposits that can shorten bulb life

This factory fastener secures panels, brackets, or internal components in your appliance. Replacing a worn, stripped, or missing screw helps keep parts aligned and tight, reducing vibration and preventing loosening during normal operation.

• Provides secure threaded attachment at the specified mounting points
• Helps maintain alignment of panels, brackets, and covers
• Replaces missing, rusted, or stripped hardware
• Typical symptoms: loose or rattling panel, misaligned trim, difficulty tightening, or a visibly missing screw

• Disconnect power and shut off gas/water before servicing
• Use the exact hardware specified for your model; lengths and threads are not interchangeable
• Hand-start threads to avoid cross-threading; tighten snugly—do not overtighten
• Retain and reuse any original washers or clips if present

The Lamp is an OEM part for Bosch ranges and ovens. The range lamp provides visibility when viewing food through the oven window or checking on items cooking on the stove.

Causes of a bad range lamp can include normal wear and tear over time, as well as accidental damage from impact or handle mishandling.

Symptoms of a bad range lamp include:

• Diminished light that does not adequately illuminate the cooking space
• Flickering or unstable illumination
• A burned out or broken bulb

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This descaling solution removes mineral scale buildup from coffee and espresso systems to help restore normal water flow and heating efficiency. Use as directed to maintain beverage quality and reduce clogging from limescale. What it does:

• Dissolves and loosens mineral scale deposits in brew circuits, heating elements, and water lines
• Helps restore proper water flow and heating performance in limescale-prone areas
• Reduces taste and aroma changes caused by scale buildup
• Supports routine maintenance to prevent common brewing issues like slow flow or inconsistent temperature

• One bottle of descaling solution

• Follow your appliance manufacturer's descaling procedure and dilution instructions exactly
• Use only on models approved for liquid descalers; do not mix with other chemicals
• Wear gloves and avoid contact with skin or eyes; rinse appliance thoroughly after descaling
• Keep out of reach of children and do not ingest

This display module replaces the appliance's front-face display to restore visible cycle information and touch feedback. It provides the user interface needed to view settings, time remaining, and mode indicators. What it does:

• Shows cycle status, remaining time, and selected options on the control panel
• Relays user input from touch/buttons to the main control board
• Helps diagnose UI problems when display is blank, unreadable, or buttons don't respond
• Works with the existing control electronics as the visual/input interface

• Disconnect power at the breaker or unplug the appliance before starting
• Handle the module carefully to avoid bending pins or scratching the display
• Use basic hand tools to remove the control panel; keep screws and fasteners organized

This OEM replacement pin is a small hardware fastener used to secure or pivot mating components within the appliance. Replacing a worn or missing pin restores proper alignment and reliable movement of the affected part or linkage.

• Serves as an axle/retainer for hinges, brackets, or linkages
• Maintains alignment of moving parts to reduce wobble or binding
• When bent, worn, or missing, you may notice looseness, rattling, misalignment, or difficulty opening/closing related components
• Direct-fit OEM replacement for the specified application

• Disconnect electrical power and shut off water or gas before servicing
• Support the component being serviced to prevent strain or damage during removal/installation
• Note the original orientation and retain any washers, clips, or spacers for transfer to the new pin
• Inspect mating holes/bushings; replace related worn parts to ensure proper fit and operation

This replacement screw secures appliance panels and components in their proper position. Installing this screw restores a solid, factory fit and helps prevent vibration and misalignment.

• Fastens panels, brackets, or internal parts to the appliance chassis
• Maintains alignment to reduce vibration and rattling noises
• Replaces missing, rusty, or stripped hardware
• Typical symptoms include loose panels, gaps, rattles, or a screw that won't tighten

• Disconnect power (and shut off water or gas, if applicable) before servicing
• Support panels and watch for sharp edges and pinch points
• Use the correct driver size/type for your model to avoid stripping
• Start threads by hand to prevent cross-threading; tighten snugly without over-torquing

This grille for pan is a replacement trim piece that restores proper airflow and appearance around the appliance pan. It helps keep the pan area protected and looking finished after repair. What it does:

• Covers and ventilates the pan opening to help direct airflow and prevent debris entry
• Replaces a cracked, warped, or missing grille to restore fit and finish
• Helps eliminate rattling or rubbing caused by a damaged trim piece
• Matches OEM fit so it installs cleanly with the original mounting points

• Install requires removal of the surrounding trim or access panel; follow your appliance manual
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• Disconnect power to the appliance before working in the service area
• Replace damaged clips or screws with OEM fasteners for secure fit

This push-button switch is a user-interface component that completes electrical circuits when pressed, restoring control to the affected function. It replaces a worn or failed switch to help regain reliable button response. What it does:

• Acts as the tactile electrical contact for a control or door function
• Restores responsiveness when a button no longer actuates the appliance
• Can stop intermittent operation caused by a worn or corroded switch contact
• Common symptom: controls or a specific function do not activate when the button is pressed

• One push-button switch as shown

• Disconnect power to the appliance before beginning any work
• Access may require removing a console or panel—keep track of fasteners and wire locations
• Disconnect wiring harness or terminals carefully; note connector orientation for reassembly
• Test the new switch with the power off using a multimeter continuity check before reassembly

This power module provides the electrical supply and protection circuitry for the appliance's main control system, restoring reliable power delivery so the electronic controls and motors can operate correctly. What it does:

• Supplies regulated power to the appliance control board and related electronics
• Protects controls from voltage irregularities and helps prevent unexpected shutdowns
• Common symptom: appliance is unresponsive or won't power on
• Other symptoms: control panel lights or display do not illuminate, intermittent power loss, or error codes related to control power

• One power module

• Disconnect all power (unplug or switch off circuit breaker) before starting any repair
• Handle the module and connectors carefully to avoid damage; observe basic ESD precautions when possible
• Verify matching connectors and mounting before reinstalling; do not force connectors

This heating element is the dryer heater assembly that produces the hot air needed for drying. It replaces a failed or burned-out element so the appliance can heat normally during cycles. What it does:

• Heats incoming air so the drum reaches proper drying temperatures
• Commonly fails when the dryer produces no heat or only low/weak heat
• Can cause longer dry times and trigger thermostat safety trips when degraded
• Works as the core heating component alongside the blower and thermostats

• Disconnect power before starting; this part requires working near live electrical connections
• Inspect thermal fuses and thermostats when replacing the element; replace any faulty safety components
• Handle element carefully to avoid bending or damaging the heating coils