Prg366eg/06 Parts

Restore confident control of your appliance with this replacement control knob. It slides onto the control shaft to provide a secure, accurate grip so you can easily select settings when the original knob is cracked, stripped, or missing. What it does:

• Attaches to the control shaft to select temperature, cycle, or power settings
• Restores positive engagement and smooth turning of the control
• Helps resolve a loose, wobbly, or slipping selector
• Replaces knobs that are cracked, broken, or won't stay on

• One control knob

• Disconnect power; for gas appliances, also shut off the gas supply before servicing
• Pull the old knob straight off the shaft; if your model uses a set screw or clip, loosen/remove it first
• Align the new knob with the shaft and press on firmly; retighten any set screw if present
• Test operation to ensure the knob engages and turns the control smoothly

This cooktop burner grate supports cookware over the flame, keeping pots and pans stable during use. Replace a cracked or warped grate to restore a level cooking surface and proper clearance above the burners.

• Provides a stable surface for pots and pans above each burner
• Maintains correct spacing between flame and cookware for consistent heating
• Replace if cracked, severely chipped, or warped
• Replace when cookware rocks or the grate no longer sits level

• Allow the appliance to cool completely; turn off gas and power before servicing
• Lift off the old grate; clean the cooktop and burner caps are seated
• Position the new grate with feet aligned to the burner layout
• Test burner ignition after installation

This flexible door seal/gasket creates a watertight barrier around the appliance door to help prevent leaks and keep internal temperatures stable. Replacing a worn seal restores proper sealing for reliable operation. What it does:

• Seals the door edge to prevent water from leaking during cycles
• Helps maintain internal temperature and cleaning performance
• Reduces moisture buildup and prevents odors from trapped debris
• Restores proper door alignment when the old seal has become misshapen or torn

• Disconnect power and water supply before starting any repair
• Remove the old seal by gently pulling from the door channel and clean the channel of debris
• Press the new gasket into the channel evenly, working around the entire door; ensure the seal is fully seated and not twisted
• If clips or retainers are present, verify they are correctly engaged; do not use sharp tools that can nick the gasket

The Tube is a genuine OEM part for Bosch ranges. This part facilitates the delivery of gas to the surface burners, ensuring that they operate efficiently and safely. 

Over time, the Tube may exhibit signs of wear or damage due to rusting, physical damage or natural degradation.

Symptoms indicating the need for a new Tube include:

• A decrease in burner flame quality or uneven flames, which can affect cooking performance.
• The smell of gas in the vicinity of the range, signaling a potential gas leak.
• Difficulty igniting the surface burners or experiencing incomplete combustion.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is a round control knob that restores secure grip and accurate control for a range, cooktop, or oven control shaft. Replaces a cracked, stripped, or missing knob so controls turn smoothly and reliably. What it does

• Fits onto a standard control shaft to change heat or function settings.
• Replaces a broken, loose, or missing knob that won't turn or slips on the shaft.
• Restores tactile grip and precise adjustments for temperature or burner selection.
• Helps prevent accidental setting changes caused by a damaged knob.

• One control knob.

• Turn appliance controls to OFF and disconnect power (or gas) before working on the appliance.
• Pull the old knob straight off the control shaft; align splines and push the new knob on until seated.
• If knob resists, verify correct orientation of splines and avoid excessive force.

This 48-inch gas supply tube routes fuel from the appliance inlet to the internal gas valve, providing a direct replacement for damaged, corroded or bent factory tubing. Restores safe gas flow when the original tube is compromised. What it does:

• Directs gas from the inlet to the appliance gas valve for ignition and burner operation.
• Replaces tubing that is cracked, bent, corroded or otherwise leaking.
• Addresses symptoms like a persistent gas odor near the appliance, burners that won't light, or visible damage to the original tube.
• Provides the correct length and routing to match the appliance's original configuration.

• Turn off the gas supply and electrical power to the appliance before beginning work.
• After installation, test all connections for leaks with a soap-and-water solution or a calibrated gas leak tester; do not use an open flame.
• Do not modify or shorten the tube; use the correct routed length and fittings for a proper seal.

This bottom cavity cover replaces the removable floor panel under the oven cavity to protect internal components and help contain spills for easier clean-up. It restores the oven's lower interior surface for safe, tidy operation. What it does:

• Covers and protects the oven cavity floor and components from drips, crumbs, and direct heat exposure
• Helps keep the lower oven area clean and makes wiping up spills simpler
• Supports proper airflow path and component protection when installed
• Commonly replaced when the original cover is dented, warped, or damaged

• One bottom cavity cover

• Turn off and disconnect power to the appliance before starting any repair
• Allow the oven to cool completely; use gloves to handle sharp edges
• Installation typically requires removing the oven racks and sliding the cover into position; keep fasteners if present

This temperature display assembly lets you see the appliance's current temperature and settings from the front control panel, restoring visible feedback for normal operation and monitoring. What it does:

• Shows current temperature and visible status from the control surface
• Restores readable temperature readout when the original display is blank or dim
• Provides the user interface feedback needed to confirm temperature and mode changes
• Can eliminate confusing or missing information caused by a failed display

• Disconnect power to the appliance before beginning service to avoid shock.
• Handle the display carefully to avoid damaging the lens, contacts, or ribbon cable.
• May require removing the control panel or trim to access the display; keep fasteners organized.
• If controls remain unresponsive after replacement, inspect the main control board.