Prg366gh /07 Parts

This replacement electronic display for the control panel restores a clear, readable screen so you can view settings, cycle status, and alerts from the appliance at a glance. What it does:

• Shows operating status, time/temperature, and alerts from the main control
• Provides user feedback on selected options and cycle progress
• Common failure signs: blank or dim readout, missing segments, flickering, or garbled characters
• Indicators may be unresponsive even though the unit powers on

• One display

• Disconnect power at the breaker before servicing
• Access the control panel; handle the board by the edges and observe ESD precautions
• Transfer any mounting hardware and wire connectors from the original part
• Restore power and run a functional test to confirm a clear, stable readout

This Foot is an OEM component for Bosch Ranges. Functioning as a stabilizing support for the range, these feet provide balance and elevation, ensuring the appliance's proper positioning and stability on the floor.

A common issue with malfunctioning or damaged Foot involves wear, breakage, or loss of the foot's grip, leading to instability or uneven placement of the range. Exposure to weight strain, movement, or irregular floor surfaces can contribute to foot damage over time.

Symptoms of defective or worn-out Foot may include:

• Uneven or wobbly placement of the range
• Difficulty in leveling the appliance
• Visible damage or missing components in the feet

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This screw secures appliance panels and internal components. Replacing a missing, rusted, or stripped fastener restores proper fit and alignment to prevent movement, rattling, and premature wear.

• Fastens appliance components and panels for a secure assembly
• Helps maintain proper alignment to reduce vibration and noise
• Replaces missing or damaged hardware that can cause loose fits
• Supports reliable operation after service or repair

• Disconnect power and, shut off water or gas before service
• Use the correct driver for the head type; start threads by hand to avoid cross-threading
• Tighten evenly and do not overtighten to prevent stripping or damage

This is a replacement rotary potentiometer for appliance control panels—provides smooth variable input for temperature/speed/setting adjustments so the appliance responds correctly to user control changes. What it does:

• Acts as the variable resistor that the control knob uses to set temperature, speed, or other settings
• Restores accurate user input when original control becomes intermittent, jumps, or fails to change settings smoothly
• Helps eliminate erratic readouts or unresponsive knob adjustments linked to a worn or faulty potentiometer
• Works as the electronic interface between the knob and the appliance control board

• Disconnect power before accessing internal control panel to avoid shock or damage
• Handle PCB and connector pins carefully; avoid bending leads or contaminating contacts
• Replace only with the exact part number listed and reassemble panel alignment before testing

This Jet is the small spray nozzle that directs a focused stream of water inside the dishwasher's wash system. Replacing a clogged or damaged jet helps restore proper spray coverage, wash pressure, and overall cleaning performance.

• Directs and meters water flow within the wash system
• Helps maintain spray arm/wash zone pressure and coverage
• Replace if clogged with mineral deposits or physically damaged
• Symptoms include poor cleaning, weak spray, unusual wash noise, or leaks near the nozzle

• Disconnect power and shut off the water supply before servicing
• Access the nozzle location and note its orientation and any seals/clips
• Clean mating surfaces; transfer any reusable seal/clip if present
• Seat and lock the jet fully; run a test cycle and check for leaks

This cap covers and protects its mating opening or fastener on the appliance, helping keep debris and moisture out while restoring a clean, finished look. Replace a cracked or missing cap to maintain proper protection and appearance. What it does:

• Provides a finished cover for an opening or fastener
• Helps prevent dust, debris, and moisture intrusion
• Supports proper fit of the assembly it mates with
• Common signs include a cracked, loose, or missing cap; exposed hardware; or difficulty securing the area

• 1 cap

• Disconnect power; shut off water or gas to the appliance before servicing
• Note the original cap's orientation; release any tabs or threads to remove
• Clean the mating area; press or thread the new cap on until fully seated—do not overtighten
• The cap is secure and that surrounding components operate normally

This display is the user interface module that shows cycle status, settings and error indicators so you can read and control the appliance from the front panel. It restores visible feedback and menu information for normal operation. What it does

• Provides the visible display for cycle progress, timers and selected options
• Shows error codes and status messages to help identify issues
• Works with the appliance control board to update settings and user inputs
• Restores readable display after a failed or cracked panel

• Disconnect power to the appliance before starting work to avoid shock or damage
• Replacement typically requires removal of the front control or console panel; handle the display lens and ribbon connectors carefully
• Keep screws and small fasteners organized for reassembly

Replacement water inlet valve that controls an appliance's incoming water flow for reliable fill and cycle operation. Replacing a faulty valve can stop no-fill, slow-fill, or continuous-fill issues and restore normal performance. What it does:

• Opens and closes to regulate water entering the appliance during fill cycles.
• Helps ensure correct water levels for proper washing or rinsing.
• Common symptom fixer for appliances that won't fill, fill slowly, or keep filling.
• May cause visible leaks at the valve or trigger fill-related fault behavior if failed.

• Turn off power and shut off the water supply before starting any work.
• Open a cycle or relieve pressure to drain residual water before removing the old valve.
• Inspect and replace any worn seals or inlet hoses when installing the new valve.
• Follow the appliance service manual for specific removal/installation steps.

This is a replacement control knob that restores safe, easy control of a cooktop or oven function. It provides a secure grip and clear position indication so you can set heat or cycle settings precisely. What it does:

• Fits over the control shaft to allow turning temperature/settings without touching the control stem
• Replaces cracked, stripped, missing, or hard-to-turn knobs
• Restores clear detent positions for accurate setting selection
• Helps prevent accidental changes by seating securely on the shaft

• Before servicing, disconnect power to the appliance and shut off gas supply if applicable
• Pull old knob straight off the control shaft; align replacement onto the shaft and push until fully seated
• Do not use excessive force; inspect the control stem for damage before installation

This ignition cable connects the stove's spark electrode to the ignition system so burners ignite reliably. It replaces a damaged or degraded lead to restore spark delivery and consistent lighting. What it does:

• Transfers ignition voltage from the module to the burner electrode so sparks form at the burner
• Helps stop intermittent or no-spark symptoms when the wire is cracked or corroded
• Prevents arcing caused by insulation damage or improper routing
• Restores normal ignition behavior when the original cable is worn or burned

• One ignition cable

• Disconnect power and turn off gas supply before starting any service
• Inspect routing and connectors; replace only if the wire or insulation is damaged
• Keep the cable away from high-heat areas and sharp edges to prevent future damage

The Two Way Valve is an OEM component for Bosch gas ranges. It delivers fuel precisely matched to flame settings, minimizing overconsumption for savings and safety. Balanced gas flow optimizes burner performance.  

Causes of a bad two-way valve can include accelerated mineral scale accumulation or rubber seals worn down from constantly opening and shutting over years of cooking. Damage risks increase without maintenance.

Symptoms of a bad two-way valve include:

• Uncontrolled flames that fluctuate or spill over burners unpredictably   
• Inability to adjust between low simmer and high boil precisely  
• Weak or blown-out flames even on the highest gas settings
• Safety hazards posed by potential gas leakage or backflow issues

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

This OEM replacement pin is a small hardware fastener used to secure or pivot mating components within the appliance. Replacing a worn or missing pin restores proper alignment and reliable movement of the affected part or linkage.

• Serves as an axle/retainer for hinges, brackets, or linkages
• Maintains alignment of moving parts to reduce wobble or binding
• When bent, worn, or missing, you may notice looseness, rattling, misalignment, or difficulty opening/closing related components
• Direct-fit OEM replacement for the specified application

• Disconnect electrical power and shut off water or gas before servicing
• Support the component being serviced to prevent strain or damage during removal/installation
• Note the original orientation and retain any washers, clips, or spacers for transfer to the new pin
• Inspect mating holes/bushings; replace related worn parts to ensure proper fit and operation

This replacement screw secures appliance panels and components in their proper position. Installing this screw restores a solid, factory fit and helps prevent vibration and misalignment.

• Fastens panels, brackets, or internal parts to the appliance chassis
• Maintains alignment to reduce vibration and rattling noises
• Replaces missing, rusty, or stripped hardware
• Typical symptoms include loose panels, gaps, rattles, or a screw that won't tighten

• Disconnect power (and shut off water or gas, if applicable) before servicing
• Support panels and watch for sharp edges and pinch points
• Use the correct driver size/type for your model to avoid stripping
• Start threads by hand to prevent cross-threading; tighten snugly without over-torquing

This grille for pan is a replacement trim piece that restores proper airflow and appearance around the appliance pan. It helps keep the pan area protected and looking finished after repair. What it does:

• Covers and ventilates the pan opening to help direct airflow and prevent debris entry
• Replaces a cracked, warped, or missing grille to restore fit and finish
• Helps eliminate rattling or rubbing caused by a damaged trim piece
• Matches OEM fit so it installs cleanly with the original mounting points

• Install requires removal of the surrounding trim or access panel; follow your appliance manual
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• Disconnect power to the appliance before working in the service area
• Replace damaged clips or screws with OEM fasteners for secure fit

This push-button switch is a user-interface component that completes electrical circuits when pressed, restoring control to the affected function. It replaces a worn or failed switch to help regain reliable button response. What it does:

• Acts as the tactile electrical contact for a control or door function
• Restores responsiveness when a button no longer actuates the appliance
• Can stop intermittent operation caused by a worn or corroded switch contact
• Common symptom: controls or a specific function do not activate when the button is pressed

• One push-button switch as shown

• Disconnect power to the appliance before beginning any work
• Access may require removing a console or panel—keep track of fasteners and wire locations
• Disconnect wiring harness or terminals carefully; note connector orientation for reassembly
• Test the new switch with the power off using a multimeter continuity check before reassembly

This is a factory-style screw used to secure appliance panels and components for a reliable, low-profile hold. It replaces worn or missing fasteners to stop rattling and keep parts aligned during normal use. What it does:

• Secures trim, panels, brackets or small components in place
• Stops loose parts that can cause rattling or vibration noises
• Restores correct fit where a missing or damaged screw allows gaps
• Works as a direct replacement when the original fastener is lost or stripped

• One screw

• Disconnect power and water before servicing the appliance
• Start the screw by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly but avoid over-torquing to prevent stripping or part damage
• Keep removed hardware organized to ensure correct reassembly