Prg366jg/08 - Fd950800067 Parts

This orifice is the small, calibrated gas jet used in the oven burner to control natural gas flow for proper combustion and consistent heat. It replaces a worn or clogged orifice to help restore reliable oven ignition and baking performance. What it does:

• Directs and meters natural gas to the oven burner for correct flame size and stability
• Helps resolve symptoms like weak or uneven burners, weak ignition, or yellow/sooting flames when caused by a restricted orifice
• Used on the oven top/burner assembly where a #38 sized jet is specified
• Fits into the burner orifice holder and works with the existing regulator and valve

• Install only after shutting off the gas supply and following all safety procedures; check for leaks with a soapy water solution or approved leak detector
• Use correct tools and avoid damaging the orifice tip; thread carefully to prevent cross-threading
• Do not modify the orifice; replace with the exact specified size to maintain safe operation

This receiver is the appliance's wireless signal module that helps the control system receive commands from the user interface or remote sensors, restoring responsive control and normal operation. What it does:

• Receives wireless or remote commands and passes them to the main control board
• Helps re-establish communication when the appliance ignores panel inputs or remote signals
• Can stop intermittent operation caused by lost or weak signal reception
• Works as part of the appliance's electronic control and user-interface system

• One receiver module

• Disconnect power to the appliance before beginning any repair to avoid shock or damage
• Handle the module by its housing; avoid touching electronic contacts or circuit traces
• Verify connector orientation and secure all wiring before powering the appliance

The Fan Motor is an OEM part for Bosch ovens that drives the convection fan, which is responsible for circulating hot air throughout the oven during the convection cooking process.

A bad fan motor can occur due to wear and tear over time, electrical malfunctions, or physical damage. Signs of a faulty assembly include the convection fan not spinning, noisy operation, or inadequate airflow.

Symptoms of a bad fan motor include:

• The fan not spinning or operating at a reduced speed
• Unusual noises coming from the fan motor
• Inadequate airflow or uneven cooking 

Replace your malfunctioning fan motor with this genuine OEM Bosch part to restore your oven's convection feature. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This display module is the control panel component that shows cycle settings and status and lets you operate the appliance. It restores visible feedback and touch/press input when the original display or control surface fails. What it does:

• Shows cycle information, time remaining, and status indicators on the front control panel
• Receives user inputs from buttons or touchpad and sends commands to the main control board
• Common symptoms it helps resolve: blank or unlit display, missing status indicators, unresponsive front-panel controls, or intermittent display behavior
• Works as a direct replacement for a failed or damaged display assembly to restore normal user interface functions

• Disconnect power to the appliance before starting and confirm no voltage is present
• Handle the module carefully to avoid static discharge; wear an ESD strap if available
• Access typically requires removing the control console or overlay—keep track of fasteners and wire connectors
• After installation, reconnect power and test all display functions and buttons; if problems persist, verify connections and related control board components

This genuine replacement seal helps restore a watertight dishwasher door, preventing leaks and reducing moisture on floors. Replaces worn or hardened door gasket to improve seal integrity and cleaning performance. What it does:

• Creates the watertight barrier between the dishwasher door and tub to stop leaks
• Helps maintain proper spray and water containment for effective cleaning
• Addresses symptoms like water pooling under the dishwasher or along the door
• Reduces moisture and potential floor damage caused by a failing gasket

• One replacement door seal

• Inspect the door flange and sealing channel for debris or damage before installing
• Clean mating surfaces and allow to dry so the new seal seats properly
• Press the seal into the channel evenly—avoid stretching or twisting the gasket

This hob top is the replacement top panel that covers the cooking surface and supports burners and controls, restoring the cooktop's appearance and protecting internal components. It fits specific Bosch cooktop assemblies. What it does:

• Replaces a damaged, cracked, or cosmetically worn cooktop top panel
• Provides a stable surface for burners and control components
• Helps protect internal wiring and parts from spills and debris
• Restores a proper seal and alignment between burners and the cooktop surface

• One hob top (top panel) as described

• Installation typically requires removing the cooktop from its counter opening; follow manufacturer instructions
• Disconnect power (and gas if applicable) before beginning work to avoid shock or leakage
• Use proper tools and avoid overtightening fasteners to prevent cracking or damage

This bottom cavity cover replaces the removable floor panel under the oven cavity to protect internal components and help contain spills for easier clean-up. It restores the oven's lower interior surface for safe, tidy operation. What it does:

• Covers and protects the oven cavity floor and components from drips, crumbs, and direct heat exposure
• Helps keep the lower oven area clean and makes wiping up spills simpler
• Supports proper airflow path and component protection when installed
• Commonly replaced when the original cover is dented, warped, or damaged

• One bottom cavity cover

• Turn off and disconnect power to the appliance before starting any repair
• Allow the oven to cool completely; use gloves to handle sharp edges
• Installation typically requires removing the oven racks and sliding the cover into position; keep fasteners if present

This is a replacement cooking area knob that restores user control of a cooktop's heat/zone selector. It matches the original shape and detent pattern for a secure fit and reliable operation. What it does:

• Replaces a cracked, worn or missing cooking area control knob
• Restores tactile control for burner/zone selection and temperature settings
• Helps stop slipping or inaccurate pointer alignment during use
• Fits on the original shaft to maintain safe operation

• Remove power to the appliance or turn element to OFF before servicing
• Pull off the old knob straight from the control shaft; press the replacement onto the shaft until seated
• If knob does not seat easily, confirm correct orientation and shaft type before forcing
• If controls still don't work after installation, check the switch or control assembly (replacement knob only replaces the user interface)