Ps950fsss Parts

This bimetal limit thermostat helps prevent oven overheating by cutting power when internal temperatures exceed safe levels. It restores normal temperature control and protects oven components from heat damage. What it does:

• Senses excessive oven temperature and opens the circuit to stop heating
• Helps prevent continuous heating or unsafe temperature rise
• Can be replaced if oven cycles erratically, won't reach or maintain set temperature, or overheats
• Works as a safety cutoff in the oven's temperature control system

• One bimetal limit thermostat

• Disconnect power to the appliance before inspecting or replacing the part
• Follow the oven's service manual for proper access and wiring procedures
• Handle terminals and wiring carefully; ensure secure connections and correct orientation

A replacement plastic PCB standoff that secures and insulates the appliance control board from the chassis to prevent shorts and maintain stable mounting. Restores correct spacing and support for a loose or rattling control board. What it does:

• Holds the printed circuit board off the metal frame to prevent electrical contact and shorting
• Keeps the control board aligned and stable to reduce vibration-related faults or intermittent connections
• Provides an insulated mounting point where an original standoff is cracked, missing, or worn
• Helps ensure reliable screw placement and consistent board spacing during reassembly

• One plastic PCB standoff

• Disconnect power to the appliance before servicing to avoid shock or damage
• Use the original screw size and do not overtighten to prevent cracking the standoff or PCB
• Replace any damaged mounting hardware; verify the board sits flat and is properly insulated from metal parts

Nickel

This guide & overlay assembly replaces the worn or damaged trim piece that guides and covers the appliance control area, restoring a clean, secure panel appearance and proper button/knob alignment. What it does:

• Provides the outer trim/guide for the control panel so buttons and knobs seat correctly
• Protects underlying switches and electronics from spills and debris
• Restores alignment and prevents sticking or misaligned controls caused by a damaged guide
• Improves the appliance's appearance by replacing faded, cracked, or peeled overlays

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle the overlay carefully to avoid scratching or bending during installation
• Installation typically requires removing the control panel or bezel; follow the OEM service instructions
• Use appropriate tools and keep track of screws and clips

This is the upper inner glass panel for the oven door — a direct-fit replacement that restores the door's inner lining and helps protect internal components from heat and debris. What it does:

• Replaces cracked, chipped or shattered upper inner door glass
• Protects oven insulation and internal components from spills and heat exposure
• Helps maintain a sealed inner door surface for proper cooking performance
• Restores a clean, intact interior door appearance and makes cleaning easier

• One upper inner oven door glass panel

• Disconnect power to the appliance before beginning any repair
• Handle glass carefully and wear cut-resistant gloves and eye protection
• Replacement typically requires removing the oven door and separating door panels; follow OEM instructions
• Inspect surrounding door seals and hardware and replace if damaged

This oven door insulation pad fits behind the inner door liner to help retain heat in the oven cavity and reduce heat transfer to the outer door. It restores proper oven temperature control and improves cooking consistency. What it does:

• Replaces worn or damaged insulation that can allow heat to escape from the oven cavity
• Helps the oven reach and maintain set temperatures for more even baking and roasting
• Reduces excessive outer door temperatures and hot spots on the range front
• Restores the intended thermal barrier between the oven cavity and outer door assembly

• One oven door insulation pad

• Disconnect power to the appliance before starting any repair; allow the oven to cool completely
• Installation commonly requires removing the oven door and inner door liner—follow OEM instructions
• Handle insulation carefully; wear gloves and a dust mask if material is fibrous

This oven door insulation retainer secures the insulation inside the oven door, helping maintain proper heat containment and preventing insulation from shifting. It's a small but important clip that keeps the door's inner components stable. What it does:

• Holds inner door insulation in place so insulation stays positioned during use
• Helps maintain consistent heat distribution by preventing insulation gaps
• Reduces rattling or movement of the door interior when opening or closing
• Commonly replaced when insulation is loose, visible, or shifting inside the door

• One oven door insulation retainer

• Disconnect power to the appliance before beginning any repair to avoid shock or injury
• Access typically requires removing the oven door or inner door panel — follow your model's service instructions
• Handle door panels and insulation carefully to avoid damage; keep fasteners organized for reassembly

This filter clock display is the replacement display assembly that shows the refrigerator clock and filter status indicators, helping you know when a water filter needs changing and restoring normal display function. What it does:

• Shows the refrigerator clock and elapsed time indicator for the water filter
• Displays filter status prompts so you can tell when a replacement is due
• Restores a blank, faded, or unresponsive filter/clock display
• Helps reset or update the filter life indicator when paired with proper reset steps

• Disconnect power to the appliance before beginning any work to avoid shock or injury.
• Handle the display assembly carefully to avoid scratching or damaging the lens or contacts.
• Small tools may be required to remove the control panel; keep track of screws and retainers.
• Follow model-specific disassembly and reassembly instructions.

This halogen lamp assembly replaces a worn or broken oven/range interior light to restore clear, bright illumination so you can check cooking progress without opening the door. Designed to fit OEM lamp housing and connector. What it does:

• Provides bright, halogen interior illumination so food is easy to see while baking or roasting
• Replaces a burned-out, flickering, dim, or cracked oven light assembly
• Restores proper light function when the oven lamp fails to turn on
• Fits into the lamp housing and connects to the existing oven wiring harness

• Disconnect power to the appliance before servicing to avoid shock hazard
• Allow the oven to cool completely before accessing the lamp
• Avoid touching the bulb glass with bare hands; use gloves or a clean cloth to prolong bulb life

This cover terminal block protects the appliance's power connection area by covering the terminal block where the power cord attaches. It keeps wiring secure and helps reduce risk of accidental contact and shorting. What it does:

• Covers and protects the power cord terminal block from dust, moisture and accidental contact
• Prevents exposed terminal ends that can cause arcing or shorts
• Helps keep wiring routed and secured at the power connection
• Common replacement when the original cover is cracked, melted or missing

• One cover terminal block

• Disconnect power (unplug or shut off breaker) before inspecting or replacing the cover
• Remove any mounting screws and lift off the old cover to access terminals; document wire locations before disconnecting
• Reinstall cover after confirming tight, correct terminal connections and that no bare conductors are exposed
• If terminals or wiring show damage (burning, melting, corrosion), replace or repair those parts before reinstalling the cover and restore power only when safe