Pseed Queen Parts

This fresh food compartment fan circulates cool air inside the refrigerator section to help maintain even temperatures and reduce hotspots. Replacing a worn fan can restore airflow and improve overall cooling consistency. What it does:

• Moves air through the fresh food compartment to help distribute cold air evenly
• Helps prevent warm spots and reduces temperature fluctuations in the refrigerator section
• Common symptom of failure: reduced airflow or unusual noise coming from the fresh food area

• One fresh food compartment fan

• Disconnect power to the appliance before attempting any repairs
• Access often requires removing interior panels or shelves; keep track of fasteners and trim
• Inspect wiring and connectors for damage before installing the new fan

This jumper tube flow meter measures and controls water flow through the appliance's water line, ensuring proper fill rates for the dispenser and ice system. It helps restore correct water sensing and delivery when the original flow sensor is faulty. What it does:

• Detects and measures water flow in the appliance water line so the control can regulate filling cycles
• Helps ensure full/consistent filling of the ice maker or dispenser when operating normally
• Common symptom: intermittent or no water to the ice maker or dispenser during dispense cycles
• Common symptom: slow fills or inconsistent ice production linked to poor flow sensing

• One jumper tube flow meter

• Always disconnect power and shut off the water supply before starting service
• Replace only with the exact part number shown;
• Use appropriate tools and secure tubing clamps to prevent leaks; check all connections after installation

This AHU Chill seal is a replacement gasket designed to help maintain proper temperature control and airflow in the chilled compartment. It restores a tight seal to reduce warm-air leaks and help the appliance run more efficiently. What it does:

• Replaces a worn or damaged chill compartment gasket to restore an airtight seal
• Reduces warm air infiltration that can cause frosting or inconsistent temperatures
• Helps the cooling system maintain set temperatures and reduces run time caused by leaks
• Fits where the AHU/chill compartment requires a dedicated perimeter seal

• One AHU Chill seal (gasket) as shown

• Remove old gasket and clean mating surfaces before installing the new seal
• Press the gasket into the channel evenly; avoid stretching or twisting the seal
• Check the seal for uniform contact and adjust as needed; replace damaged retainers if present

This wire Wine & Beverage Rack replaces a damaged or missing shelf in wine and beverage refrigerators to securely hold bottles and maximize usable storage space. It restores proper bottle support and prevents shifting during use. What it does:

• Provides stable support for wine and beverage bottles so they store evenly and don't roll or tip.
• Restores proper spacing and organization inside the cooler or wine compartment.
• Helps prevent contact between bottles and interior surfaces that can cause chips or scratches.
• Fits into the cabinet's existing rails or brackets to recreate the original storage layout.

• One replacement wire wine & beverage rack

• Unplug the appliance or switch off power before reaching into the compartment.
• Slide the rack into the existing rails or brackets; no special tools usually required.
• Handle edges carefully; avoid forcing the rack into position to prevent damage.
• If original rails or clips are damaged, inspect and replace those mounting parts separately.

This dispenser housing shield covers the refrigerator dispenser opening to restore appearance and help direct water or ice into cups. It replaces a cracked, faded, or damaged dispenser trim for a cleaner dispense area. What it does:

• Replaces damaged or faded dispenser trim for a neat, finished look
• Helps guide water and ice into containers and protects underlying components
• Reduces drafts and light from the dispenser opening
• Commonly replaced if cracked, warped, or cosmetically worn

• Remove power to the appliance before beginning work to reduce shock risk
• Typically installs with clips or screws—inspect fasteners and the surrounding trim for damage
• Handle carefully to avoid scratching the finish during installation

This evaporator fan plenum is the molded housing that channels cold air from the evaporator across the refrigerator compartments, helping maintain even cooling and efficient airflow. It replaces a cracked, damaged, or warped plenum. What it does

• Directs airflow from the evaporator fan to the fresh-food and freezer sections for consistent temperature distribution
• Helps prevent air leaks around the evaporator area that can reduce cooling performance
• Often replaced when the original housing is cracked, broken mounting tabs are present, or airflow is obstructed
• Works with the evaporator fan and ducting to reduce frost buildup caused by disrupted airflow

• One evaporator fan plenum housing

• Disconnect power to the appliance before starting any repair
• Removal typically requires accessing the evaporator compartment and detaching mounting screws and any electrical connectors or duct clips
• Handle carefully; edges may be sharp and mounting tabs can be brittle on older units
• Verify alignment of the plenum with the evaporator fan and sealing surfaces to avoid air leaks after installation

This replacement wire harness connects freezer compartment AC components to restore reliable electrical connections and signal routing. It's used where the original freezer interconnect wiring is damaged, corroded, or has loose connectors. What it does:

• Provides factory-style wiring to link freezer AC components so they receive power and control signals
• Replaces damaged, frayed, or corroded harnesses that can cause intermittent operation
• Commonly used when freezer features (fans, sensors, or linked controls) lose power or respond inconsistently
• Prevents loose connections that can cause arcing or erratic component behavior

• One replacement wire harness as shown

• Always disconnect power to the appliance before starting work
• Compare the replacement harness to the original for connector type and routing before installation
• Route and secure the harness away from sharp edges and moving parts to avoid wear