Pseed Queen Parts

This thimble door is the metal mounting sleeve that fits around an over-the-range microwave where it meets the cabinet cutout, restoring a finished look and helping secure the microwave in place. What it does:

• Provides the metal sleeve that fills the gap between the microwave and cabinet for a finished installation
• Helps position and secure the microwave to the cabinet opening
• Prevents visible gaps or exposed cabinet edges at the microwave opening
• Common replacement when the sleeve is bent, dented, or damaged during removal or reinstallation

• Turn off power to the microwave at the breaker before servicing
• Typically installed from the front/inside the cabinet; a second person may be needed to support the microwave
• Use manufacturer instructions and proper fasteners; do not force or bend the sleeve during installation

This small replacement linkage secures and positions the pan-chill assembly in compatible refrigerators, helping keep the drain/collector aligned and reducing movement or vibration. Replace a broken link to restore stable pan alignment. What it does:

• Connects and secures the pan-chill (drain/collector) assembly to the fridge framework
• Keeps the pan aligned for proper drainage and to prevent water pooling
• Reduces rattling or movement caused by a cracked or worn linkage
• Helps maintain correct spacing so adjacent components fit and operate without interference

• One linkage pan-chill mounting link

• Disconnect power to the appliance before starting work
• Access may require removing interior panels or shelving—keep fasteners organized
• Install by aligning the linkage with mating tabs and snapping or fastening into place; do not force broken plastic

This water line cover protects and conceals the refrigerator's water supply tubing behind the lower kickplate for a finished look and reduced risk of accidental snagging. Durable plastic shields tubing from contact and helps keep the area tidy. What it does:

• Covers and protects the refrigerator water supply line from accidental pulls or abrasion
• Keeps the tubing out of sight for a neater appearance
• Helps reduce noise from loose tubing contact with other components
• Supports proper routing of the water line to the ice maker/water dispenser

• One water line cover

• Disconnect power and shut off the water supply before servicing
• Remove the kickplate or access panel per the owner's manual to reach mounting points
• Align cover with the routing area and secure with existing clips or fasteners; do not force or modify

This evaporator block seal replaces the rubber gasket that seals the evaporator block assembly to the freezer cabinet, helping maintain proper airflow and prevent leakage. It restores a tight seal around the evaporator block for reliable cooling performance. What it does:

• Seals the evaporator block to the cabinet to prevent warm air intrusion and water leaks
• Helps direct refrigerant-condensed water into the drain rather than inside the cabinet
• Commonly used when you see frost build-up around the evaporator or water pooling in the freezer
• Helps maintain consistent cold temperatures by preserving the sealed evaporator area

• One evaporator block seal

• Designed for field replacement; inspect surrounding gaskets and mounting surfaces for damage before installing
• Clean and dry mating surfaces thoroughly to ensure a proper seal
• Use common hand tools; avoid over-stretching or cutting the seal during installation
• Disconnect power to the appliance before servicing and follow safety precautions for refrigeration components

This clip retainer combo secures appliance panels and trim, restoring proper fit and preventing rattling or sagging. It replaces worn or broken retainers so doors, drawers, or trim pieces stay aligned and stable. What it does:

• Holds and aligns trim or panel pieces to the appliance cabinet
• Prevents loose, vibrating, or sagging panels and trim
• Replaces cracked or broken retainers that no longer secure parts
• Restores a flush, finished appearance and reduces noise from vibration

• Disconnect power to the appliance before beginning any repair
• Remove the affected panel or trim per the appliance service instructions
• Press or snap the retainer into the mounting location until it seats fully; reinstall panel/trim
• If clips are brittle or adjacent fasteners are damaged, inspect and replace as needed

This top hinge and pin assembly secures the upper door pivot, letting the refrigerator door swing smoothly and stay aligned for a tight seal. Replacing a worn hinge restores proper door movement and helps prevent sagging or uneven closing. What it does

• Forms the upper pivot point for the door, guiding door rotation and alignment
• Holds the hinge pin that the door pivots on, keeping the door stable during use
• Helps maintain proper door seal and prevents binding or scraping
• Commonly replaced when door sags, binds, makes noise, or won't close evenly

• One hinge top & pin assembly as shown

• Unplug the appliance or disconnect power before beginning service
• Support the door while removing/installing the hinge to avoid injury or damage
• Use basic hand tools; do not overtighten fasteners to prevent binding
• Remove or secure glass or shelves first.

This foam insulation for the refrigerator manifold helps reduce heat transfer and condensation around the refrigerant/water manifold, improving temperature stability and preventing unwanted frost buildup in the cabinet area. What it does:

• Wraps and insulates the refrigerator manifold and nearby tubing to limit heat gain and condensation
• Helps maintain consistent cooling performance by reducing thermal interference with the manifold
• Reduces risk of localized frost or moisture buildup that can affect nearby components
• Be needed if existing insulation is torn, compressed, missing, or water-damaged

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove shelves, panels, or drawers as needed for access; keep track of fasteners
• Replace damaged insulation carefully to ensure full coverage of the manifold and tubing; trim if necessary for a snug fit
• If adhesive backing is present, press firmly to secure; do not block airflow or pinch tubing

This dispenser housing shield replaces the molded cover that secures and protects the refrigerator dispenser area, restoring proper fit and appearance. It provides a stable mounting surface for dispenser components and keeps the opening tidy. What it does

• Protects internal dispenser components from damage and debris
• Helps maintain proper alignment of dispenser controls, chutes and trim
• Restores a finished appearance to the dispenser opening
• Reduces gaps that can allow drafts or cause minor water spray during use

• Disconnect power to the appliance before starting; shut off the water supply if the dispenser is plumbed.
• Part typically installs with snaps or a few fasteners; retain all mounting hardware if reusing.
• Handle the molded part carefully to avoid cracking; do not force into place.

This housing shield is the outer cover for a refrigerator dispenser assembly, protecting internal dispenser components and helping maintain a clean appearance at the front of the unit. It restores proper fit and prevents exposed parts. What it does:

• Covers and protects the dispenser area and internal components from spills and damage
• Helps keep the dispenser aligned and prevents loose or rattling parts
• Restores a finished look to a cracked, warped, or missing dispenser cover
• Can reduce the risk of debris entering the dispenser mechanism

• Turn off power to the appliance before servicing to avoid electrical hazard
• Remove the outer dispenser trim or surrounding panels as needed to access the shield
• Use appropriate hand tools; avoid forcing plastic tabs to prevent breakage

This condenser shroud is the plastic cover that protects and channels airflow around the refrigerator condenser, helping the cooling system run efficiently and keeping components shielded from debris. What it does:

• Directs airflow over the condenser coils to help dissipate heat
• Protects condenser and nearby components from dust, pet hair, and accidental contact
• Helps maintain proper clearance and airflow paths behind the fridge
• Can reduce vibration noise by stabilizing condenser area

• One condenser shroud/cover

• Designed to mount in the condenser compartment; follow your model's service manual for correct orientation and fasteners
• Disconnect power to the appliance before accessing the condenser area to avoid electrical shock
• Inspect and clean condenser coils while the shroud is removed for best performance
• If clips or screws are damaged, replace them with OEM-recommended hardware

The Board LED Light Assembly is an OEM part for GE refrigerators. It provides lighting for the interior refrigerator spaces.

Causes of malfunction include normal wear over time reducing light output, or damage to wiring or circuits from impact or moisture intrusion.

Symptoms of a failing board light include:

• Dimming or flickering LED lights
• Entire lighting circuits shutting off
• Burned spots appearing on the board
• Shadows or dark spots within the refrigerator

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.