Pss-26Mgpb-Cc Parts

This is a mobility screw used to secure mobility-related components in compatible appliances, providing a reliable fastener for stable operation and correct alignment. It replaces worn or missing screws to restore secure mounting. What it does

• Fastens and secures mobility/bracket components to prevent movement or misalignment.
• Helps maintain proper alignment of moving parts that can cause noise or binding when loose.
• Commonly replaced when mounting points are stripped, damaged, or missing.
• Small replacement part that supports overall appliance stability and safe operation.

• One screw as shown/packaged by the manufacturer.

• Use the correct screwdriver or bit to avoid stripping the screw head.
• Ensure the appliance is powered off and disconnected from the power source before accessing internal components.
• Do not overtighten; snug to manufacturer torque or until the part is secure.
• If mounting hardware or threaded inserts are damaged, replace or repair those components before installing this screw.

This 8-18 x 7/8 inch stainless steel screw secures appliance panels, brackets and components for a safe, stable fit. Its machine thread and corrosion-resistant finish make it suitable for interior and mildly exposed locations. What it does:

• Fastens panels, brackets or trim where an 8-18 x 7/8" screw is specified
• Restores secure mounting for loose or rattling parts
• Resists corrosion to help maintain fit over time
• Provides the correct thread size to prevent stripping when installed properly

• One 8-18 x 7/8 in stainless steel screw

• Use the correct driver and engage threads straight to avoid cross-threading
• Tighten until snug; avoid over-torquing which can strip threads or damage parts
• Replace only with identical size and thread type to ensure proper fit
• Disconnect power and follow appliance safety guidelines before working on the unit

This discharge pan collects and channels defrost and condensate water away from the evaporator area to help prevent leaks and puddling in the cabinet. It restores proper water routing for safe, reliable cooling performance. What it does:

• Collects melt and condensate water from the evaporator/chill area and directs it to the drain or evaporator heater
• Prevents water from pooling inside the cabinet that can cause leaks or damage
• Replaces cracked, warped, or corroded pans that allow water to escape the drain path
• Helps reduce musty odors and ice buildup caused by standing water

• Inspect mounting tabs, seals, and drain path before installing; replace any damaged clips or gaskets
• Power off the appliance and disconnect power before servicing to avoid shock or injury
• Handle edges carefully; secure the pan so it sits flat and the drain outlet aligns with the drain tube

This white cover hinge replaces a worn or broken hinge that supports and pivots the appliance cover, restoring proper alignment and smooth opening/closing for the lid. Designed as a direct-fit replacement where specified. What it does:

• Provides a secure pivot point so the cover or lid opens and closes smoothly
• Keeps the cover aligned to prevent sagging, rubbing, or binding
• Restores a proper seal/closure when hinge wear causes gaps or misalignment
• Helps eliminate rattling or excess play caused by a damaged hinge

• Disconnect power (and water if applicable) before starting any repair.
• Handle the lid/cover carefully during removal to avoid dropping or injury.
• Basic hand tools are typically required; follow your model's service diagram for location and fastener details.
• Replace with the same OEM part number to ensure fit.

This boot auger motor powers the auger inside the ice dispenser boot to move ice from the bin into the dispenser chute. Replacing a worn motor restores normal ice dispensing and stops auger-related jams or no-dispense issues. What it does:

• Rotates the ice auger inside the dispenser boot to feed ice toward the chute.
• Restores ice dispensing when the auger does not turn or dispenses intermittently.
• Stops symptoms such as humming from the dispenser area, no ice output, or auger binding.
• Works with the dispenser drive components to deliver measured ice portions.

• Disconnect power to the appliance before beginning work to avoid shock or injury.
• Remove the ice bucket/door panels as required to access the dispenser boot and auger assembly.
• Handle electrical connections and mounting hardware carefully; match wire connectors and routing during reassembly.
• After install, restore power and test the dispenser through several cycles to ensure proper auger rotation and operation.

A replacement lever assembly that secures and operates the freezer door latch so the door closes and seals properly. Restores reliable door engagement to help maintain proper freezer temperature and reduce frost build-up. What it does:

• Replaces the door lever/latch mechanism so the freezer door closes and stays latched.
• Restores proper door alignment and sealing to prevent warm air entry and excess frost.
• Stops symptoms like a door that won't stay closed, pops open, or causes temperature fluctuations.
• Works with the existing latch striker and mounting hardware when not damaged.

• One lever assembly

• Disconnect power and move food to a safe location before starting the repair.
• Basic hand tools (screwdriver, nut driver) are typically needed; retain all original screws/fasteners unless damaged.
• Handle plastic components gently to avoid cracks; if surrounding trim or striker is damaged, replace those parts too.