Pt925sniss Parts

This lower bake element assembly heats the oven cavity for baking and roasting so you can cook food evenly. It replaces a damaged or failed lower heating element to restore normal oven heating performance. What it does:

• Produces the oven's lower radiant heat used during bake cycles
• Common fix when the oven won't reach or hold set temperature
• Replaces elements that are visibly burned, broken, or arcing
• Helps correct uneven baking when the lower element is not working

• Disconnect power to the appliance at the circuit breaker before servicing
• Allow the oven to cool completely; handle the element carefully to avoid damage
• Inspect wiring and connectors for heat damage and secure connections during installation
• After installation, restore power and run a short bake cycle to verify correct operation

A replacement frame board assembly that secures the oven/range control console and gives the control area a finished appearance. Restores proper mounting and protection for the control electronics so buttons and displays sit correctly. What it does

• Provides the structural frame and mounting surface for the range/oven control console and control board.
• Protects control electronics and wiring from exposure and interference.
• Keeps front control buttons, switches and displays aligned and stable.
• Restores the unit's finished appearance when the original frame is cracked, bent or broken.

• Disconnect power to the appliance before starting work to prevent shock or damage.
• Handle sharp sheet-metal edges carefully and keep small fasteners organized for reassembly.
• Some disassembly of the backguard or control console may be required to access mounting screws.

This retainer bolt fastens and secures internal appliance components to keep panels and assemblies stable during operation. It's a direct-fit replacement designed to restore proper hold and reduce looseness or vibration. What it does:

• Secures appliance parts and assemblies in place to prevent movement during use
• Restores proper alignment of panels or components that become loose
• Functions as a hardware fastener where the original retainer bolt was used

• One retainer bolt

• Disconnect power and, if applicable, gas supply before starting any repair
• Start threads by hand to avoid cross-threading; tighten with appropriate hand tools
• Do not overtighten—secure snugly to avoid stripping threads or damaging components

A ribbon connector assembly that links control boards and user interface components with a flexible flat cable, restoring signal connections for responsive controls. Use this exact replacement when the existing ribbon is damaged, torn, or intermittently failing. What it does:

• Provides a flexible flat cable connection between electronic control and display/keypad assemblies.
• Restores reliable signal transmission when the original ribbon is cracked, delaminated, or has broken conductors.
• Helps resolve intermittent controls, unresponsive buttons, or display communication faults caused by a damaged ribbon.
• Maintains factory routing and pin alignment for proper board-to-board connection.

• One ribbon connector assembly (flat flex cable)

• Disconnect power to the appliance before inspecting or replacing electronic components to avoid shock or damage.
• Handle the ribbon cable by its reinforced ends and avoid bending near the termination points to prevent conductor breakage.
• Verify connector orientation and seating; ensure locking tabs are fully engaged for a secure connection.

The Convection Motor is an OEM part compatible with GE wall ovens and convection ranges. As the primary component driving air circulation inside the oven cavity, it is responsible for the convection baking and roasting functions.

By circulating warm air around the food at high speed, the convection motor allows for faster and more even cooking without compromising quality. Causes of failure can include excess dirt or debris obstructing the motor shaft or blades, damage to motor wiring from heat, or normal component wear over time.  

Symptoms of a bad convection motor include:

• Convection cooking mode not working at all  
• Much longer than normal cooking times
• Unevenly cooked food despite rotation
• Loud grinding or whirring noises from inside the oven

This GE OEM replacement motor restores efficient convection performance. It is also compatible with Hotpoint, RCA, and select Kenmore ovens. Replace yours today for reliable cooking power.
 

This control display module is the oven/range user interface that shows status and accepts touchpad or button commands, restoring visible controls and responsive operation for affected units. What it does:

• Displays oven settings, clock, temperatures and error codes so you can monitor cycles
• Receives keypad or touch inputs to set bake, broil, timers and other functions
• Helps the range respond when buttons are unresponsive or the screen is blank
• Can resolve intermittent control behavior or incorrect readouts related to the console

• One control display module (user interface) as shown

• Disconnect power at the breaker or unplug the appliance before starting
• Handle the glass and ribbon/pin connectors carefully to avoid damage
• Remove the console or trim to access the module; keep fasteners and grounding intact
• Verify the part number on your existing module before ordering and test operation after reconnecting power

The Control Board is an OEM part for GE ovens. As the central control unit, the control board monitors and regulates critical cooking functions such as temperature settings, timers and safety features.

Causes of a bad control board can be normal wear and tear over time, exposure to heat and moisture leading to corrosion of electronic components, or accidental damage.

Symptoms of a bad control board include:

• Unresponsive control panel or dim/missing display
• Inability to select bake or broil temperatures
• Failure to preheat or maintain proper temperatures
• Safety sensors not functioning correctly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This silicon controlled rectifier (SCR) is an electronic switching component that controls current flow in appliance control circuits, helping regulate power to heaters, motors, or other loads for stable operation. What it does:

• Switches and regulates current in control boards and power circuits
• Can prevent power from reaching a heater, motor, or element when failed
• Helps protect downstream components by controlling surge/current flow

• Disconnect power to the appliance before servicing to avoid shock.
• Handle the SCR carefully to avoid electrostatic discharge (ESD) damage.
• May require board-level replacement or soldering skills.

This bottom door trim assembly replaces the lower exterior trim on the oven/range door to restore a secure fit and clean appearance. Designed to align with the door edge and cover the lower seam for a finished look. What it does:

• Replaces damaged, bent, or missing lower door trim to improve appearance and door alignment
• Covers the gap at the bottom of the oven door to help maintain a consistent seal and finish
• Prevents debris from collecting in the door seam and restores factory fitment
• Useful when the existing trim is scratched, dented, or warped

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle door and trim edges carefully; wear gloves to avoid cuts from sharp metal or glass
• Trim typically installs with screws or clips—retain original fasteners when possible

This is a replacement screw used to secure appliance components and restore proper fit and function. Installing the correct screw prevents loose panels and noisy operation and keeps parts aligned for safe use. What it does:

• Secures panels, brackets, or small assemblies to prevent movement and vibration
• Helps stop rattling or vibration caused by missing or stripped fasteners
• Restores secure fit where a screw has been lost or damaged
• Matches the OEM fit so adjoining parts align correctly

• One replacement screw as pictured

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand first, then snug; do not overtighten to avoid cracking plastic or stripping threads
• Replace only with the same type and size screw to ensure proper fit