Pvm 9005Sj3ss Parts

This assembly fuse restores overcurrent/thermal protection to the appliance's electrical circuit, helping stop power loss and intermittent operation. Replace a failed fuse to return reliable power path protection and safe operation. What it does:

• Provides circuit protection by opening the circuit when excessive current or heat is detected
• Prevents further electrical damage by interrupting power during a fault
• Common symptom: appliance won't power on or shows intermittent/no power
• Common symptom: control or heating components lose function while other parts remain powered

• Disconnect power (unplug or switch off breaker) before replacing the fuse
• Verify the appliance is fully de-energized and wear appropriate PPE (gloves/eye protection)
• Replace only with the exact part number to maintain proper protection and fit

This magnetron assembly produces the microwave energy used to heat food and includes a built-in thermal cutoff for overheating protection. Replacing a failed magnetron restores heating performance and safe operation in microwave ovens. What it does:

• Generates high-frequency microwaves that cook and warm food.
• Thermal cutoff helps stop operation if the magnetron overheats.
• Commonly replaced when the oven stops heating, heats intermittently, or has weak heating.
• If the oven produces loud humming, arcing, or unusual burning smells.

• Disconnect power and unplug the appliance before service.
• High-voltage components (magnetron and capacitor) can retain lethal charge — discharge the capacitor and follow safety procedures.
• Handle the magnetron carefully; avoid touching terminals or the ceramic output window.

A refrigerator temperature control thermostat that regulates internal cooling to keep food at the right temperature. Replaces a faulty control to restore proper cycling between compressor on/off and help maintain consistent fridge temperatures. What it does:

• Senses cabinet temperature and signals the compressor or control system to start or stop cooling
• Commonly used to correct a fridge that runs constantly or won't cool enough
• Helps restore regular on/off cycling and temperature stability when original thermostat fails
• Fits into the temperature control assembly and connects to the refrigerator's wiring harness

• Disconnect power to the appliance before installing to avoid shock or damage
• Basic hand tools are typically required; avoid forcing connectors or mounting clips

This refrigerator thermostat controls and regulates the appliance's internal temperature, helping the cooling system cycle on and off to maintain set temperatures. It replaces a failed or inconsistent temperature regulator to restore proper cooling control. What it does:

• Senses internal cabinet temperature and signals the compressor/fan to cycle on or off
• Helps keep food safely chilled by maintaining the selected temperature range
• Commonly used when the refrigerator is too warm, too cold, or cycles erratically
• Replaces a damaged, stuck, or intermittent temperature control

• Disconnect power to the appliance before beginning any repair.
• Handle capillary tube and sensor elements carefully to avoid kinks or damage.
• Ensure correct mounting and wiring match the original; take photos before disassembly for reference.

This fan motor spins the oven/convection fan to circulate heat for even cooking and help exhaust hot air. Replaces a worn or noisy motor to restore proper airflow and temperature consistency in the appliance. What it does:

• Drives the convection/circulation fan blade to move air through the oven cavity
• Helps maintain even cooking and consistent oven temperatures
• Reduces buzzing, grinding, or failure-to-spin symptoms when the old motor is failing
• Works as the mechanical drive for air exhaust and internal circulation systems

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle the motor and wiring gently; match mounting orientation and connector type during install
• Verify blade and shroud clearance before powering the unit

This nut assembly is a small mounting fastener that secures appliance components to studs or brackets, helping keep panels and internal parts stable for safe, quiet operation. What it does

• Secures components to threaded studs or bolts to prevent movement and vibration
• Restores proper fit of panels, trim, or internal assemblies when a worn or missing nut causes looseness
• Prevents electrical or mechanical contact caused by shifting parts
• Simple, durable replacement for a single mounting point

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct size wrench or socket to avoid rounding the nut; snug, not overly tight
• Verify the mating stud/bolt and threads are clean and undamaged before installation
• If other mounting hardware is corroded or damaged, replace all affected fasteners for a secure fit

This body latch assembly secures the appliance door during operation, restoring proper door closure and allowing cycles to start and run safely. It replaces a worn or broken latch to improve sealing and reliable door engagement. What it does:

• Physically latches the door to keep it closed during operation
• Prevents the appliance from starting when the door is not fully engaged
• Resolves symptoms like a door that won't stay closed, cycles that won't start, or intermittent door-sense errors
• Replaces worn, cracked, or damaged latch components that impair engagement

• Disconnect power (and gas, if applicable) before beginning any repair
• Remove outer door or access panel per OEM instructions to reach and replace the latch
• Handle plastic latch components carefully to avoid cracking; test door engagement before reassembling panels

This temperature thermistor is the sensor that lets the control board monitor and regulate appliance temperature for reliable cooling performance. Replacing a failing thermistor can restore proper temperature control and cycling. What it does:

• Senses internal temperature and sends readings to the control board
• Helps the compressor, fans, and defrost system run at the right times
• Commonly linked to symptoms like incorrect temperatures, overcooling, or frequent on/off cycling
• A faulty thermistor can cause improper defrost timing or erratic cooling behavior

• Disconnect power before inspecting or replacing the sensor to avoid shock
• Handle the sensor and wiring connector gently to avoid damage
• Mount the sensor in the original location and secure wiring per OEM routing

The Thermostat is an OEM part for GE  microwaves. It monitors the temperature inside the microwave during operation.

Causes of a bad thermostat can be simply wear and tear over time. Exposure to spills, dirt, or dust can also cause issues.

Symptoms of a bad microwave thermostat include:

• Food not heating evenly or completely
• Longer than normal cook times needed
• Error messages related to abnormal temperatures
• Potential overheating issues or damage due to lack of temperature control

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

A noise filter that helps suppress electrical interference on the appliance power line, reducing hum, arcing and radio-frequency interference for more reliable operation. Fits into the appliance mains to limit unwanted electrical noise. What it does

• Suppresses line noise and radio-frequency interference that can cause humming, buzzing or intermittent operation.
• Helps prevent electrical interference that affect controls, displays or nearby audio equipment.
• Used where power-line filtering is required to maintain stable operation of the appliance's electronics.
• Common symptom: intermittent control response, audible electrical noise, or interference-related malfunctions.

• One noise filter.

• Disconnect power at the breaker or unplug the appliance before servicing.
• Access may require removing a rear or control panel; keep track of fasteners and grounding connections.
• Replace only with the exact part number; ensure proper orientation and secure mounting.

The Main Board is an OEM part for GE microwaves. As the central control board that coordinates various functions, it is responsible for operating the key mechanisms of the microwave including the turntable motor, magnetron, high voltage transformer, and touchpad controls. 

Causes of a bad main board can include failure of electronic components over time due to normal wear and tear, exposure to power surges, or physical damage. 

Symptoms of a bad main board include: 

• The microwave fails to power on or function 
• Inoperative or unresponsive touchpad controls
• The turntable not spinning properly
• Uneven or incomplete cooking
• Error codes displayed

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today to restore full functionality to your microwave.
 

This nut assembly secures an appliance component to its mounting point, restoring a solid connection and preventing unwanted movement. Replace a damaged or missing nut to stop rattling and keep parts aligned for reliable operation. What it does:

• Fastens a panel, bracket or component to its mounting stud or bolt to maintain proper alignment.
• Restores a secure connection when the original nut is stripped, corroded or missing.
• Helps stop rattling, looseness or parts that won't stay in place.
• Works as a direct replacement to restore proper fit and function.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the correct-size socket or wrench; avoid cross-threading when installing.
• Tighten snugly but do not overtighten — replace mating hardware if threads are damaged.

This lamp holder secures the oven light bulb and provides the electrical connection needed for interior oven illumination. It restores a stable socket for the bulb so the oven light turns on reliably and stays mounted. What it does:

• Holds and connects the oven light bulb so the interior light illuminates during use
• Replaces a cracked, melted, or loose socket that can prevent the bulb from lighting
• Stops intermittent lighting caused by a worn or failed lamp holder
• Prevents the bulb from rattling or falling out when the oven door is opened or closed

• One lamp holder

• Disconnect power to the appliance before starting work to avoid shock
• Allow the bulb and interior to cool before handling the lamp holder
• Handle wiring and connectors carefully; match original connections and secure firmly

Stirrer motor

This circulation motor powers air movement inside the appliance to maintain proper airflow and even temperatures. Replacing a failed motor restores circulation for more consistent cooling and reduces noise or performance issues. What it does:

• Spins the fan to circulate air through the cooling/ventilation path
• Helps maintain even temperatures and proper airflow in the appliance
• Commonly replaced when airflow is weak, cooling is uneven, or the motor is noisy
• Stops operation if the motor fails, which can lead to frost buildup or reduced performance

• Disconnect power to the appliance before starting any repair
• Access and mounting steps vary by model; follow the appliance's service manual or wiring diagram
• Handle wiring connectors carefully and confirm proper fan rotation before reassembly