Pvw9215skiss Parts

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage. 

Symptoms needing for Appliance Spray Paint include:

• Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
• A desire to refresh or update the appearance of the appliance without the need for complete replacement
• Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.

Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.

Symptoms indicating the need for Appliance Touchup Paint include:

• Visible scratches or chips on the appliance surface
• Areas of exposed metal prone to rust
• Blemishes that affect the overall aesthetic of the appliance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This cover screw secures appliance panels and covers, keeping components protected and aligned. Replace missing, stripped, or corroded screws to restore a tight fit and help eliminate rattles, gaps, or panels that won't stay in place.

• Attaches an access cover or panel to the appliance frame
• Helps maintain proper alignment to protect internal components
• Replaces missing, stripped, or rusted hardware
• Typical signs: loose or rattling panel, cover won't stay secure, damaged or rounded screw head

• Disconnect power before servicing
• Support the panel while removing and installing screws to prevent misalignment
• Start threads by hand to avoid cross-threading; do not overtighten
• Use a matching driver bit to avoid damaging the screw head

This is a range hood blower assembly that removes cooking grease and odors from the air. If the air is not being cleaned effectively, the blower assembly will need to be replaced. Check to make sure that the filter itself is not clogged due to cooking grease. If it is, it should be cleaned. If the blower is not running at all, run diagnostics to ensure it's the blower assembly itself that has gone bad and not another part. Unplug the unit from its electrical outlet or shut off the house circuit breaker prior to replacing this part. The replacement process is very easy and takes about 15 to 30 minutes from start to finish. A nut driver will be needed for this task.This part is a genuine OEM part that comes straight from the manufacturer. It is sold individually. The blower assembly is compatible with range hoods that are manufactured by GE.

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

This sheet-metal screw secures appliance panels, brackets, and components to the cabinet. Replacing a missing or stripped fastener restores a tight, rattle-free fit and helps keep assemblies aligned for reliable operation.

• Fastens sheet-metal parts to the chassis or support brackets
• Replaces stripped, corroded, or lost screws to restore proper hold
• Helps reduce vibration and noise from loose panels
• Maintains alignment of covers, ducts, or trim

• Disconnect power to the appliance; shut off water or gas if applicable.
• Match this screw to the original location and length.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• If the original hole is damaged, repair or replace the mounting point before installing.

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.

This replacement screw secures panels, brackets, or trim within your appliance. Replacing a worn, stripped, or missing screw restores a tight, rattle-free fit so components stay aligned and operate as intended. What it does:

• Fastens components at the original factory locations specified for this part
• Replaces missing, damaged, or stripped screws to restore holding power
• Helps reduce vibration and rattling from loose parts
• Maintains proper alignment of panels, covers, brackets, and trim

• Disconnect power (and gas, if applicable) before servicing
• Match to the original screw and install in the same location and orientation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver or nut-driver; transfer any washers or spacers from the original hardware if present

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Color: Biscuit. Size: 13 oz. can. Enamel spray paint.

This electronic control board and button assembly replaces a failed console control on a range or wall oven, restoring user input and display functions so the oven can accept commands and show status. What it does:

• Replaces the main user interface and control electronics for oven functions
• Restores response to keypad/selector button presses and display feedback
• Can resolve symptoms like unresponsive buttons, blank or erratic display, or intermittent control behavior
• Works as the single combined board-and-button assembly used by the OEM for the console

• Disconnect power at the breaker before starting to avoid shock or damage
• Handle the board carefully and avoid contact with circuitry; observe ESD precautions
• Use basic hand tools; panel removal may be required to access the console
• The part number on the original assembly matches this replacement before installing

This console control assembly replaces the oven's primary control and button interface to restore user input and electronic control of cooking functions. It provides the main touch/press buttons and control board needed for operation. What it does:

• Processes user button presses and sends commands to the oven's systems
• Manages bake/ broil/ timer functions and overall oven control logic
• Replaces a failing console that causes unresponsive or intermittent buttons
• Can resolve symptoms such as unresponsive controls, no display feedback, or oven not starting when commands are entered

• Disconnect power at the household breaker before starting any repair
• Take pictures of wire locations or label wires before removal to ensure correct reassembly
• Handle circuit board with care to avoid static discharge or damage to connectors

The Grease Filter is an OEM part for GE range hoods. Installed at the front of the hood, this removable filter is responsible for trapping grease, smoke and other residue before exhaust venting occurs. 

Causes of a faulty grease filter can include normal saturation over time, exposure to high heat methods, or accidental impact damage.

Symptoms of a bad grease filter include:

• Reduced or inefficient ventilation from the hood  
• Strange cooking smells not being adequately removed
• Visible grease and residue below the filter area
• Increased vent or duct buildup impacting airflow 

This genuine OEM GE replacement is compatible with additional Hotpoint, RCA and Kenmore range hood models.

Color: White. Size: 8-18 x 3/8 inch.