Pwe23kkskhss Parts

This replacement basket bottom assembly restores the lower basket's support and containment so stored items sit securely and the basket functions as intended. It's a direct-replacement part used when the basket floor is cracked, warped, or broken. What it does:

• Replaces the lower/bottom section of the basket to restore proper support and prevent items from falling through
• Stabilizes the basket so it rolls and seats correctly
• Stops rattling or sagging caused by a damaged or missing basket bottom
• Useful when the basket floor is cracked, split, or has broken support ribs

• Disconnect power to the appliance before any service; follow the manufacturer's safety instructions
• Remove the basket or access panel as needed to reach and replace the bottom assembly
• Inspect surrounding mounting tabs and rails for damage; replace any worn hardware for a secure fit
• Use basic hand tools.

This 8-18 x 9/16 screw is a short sheet-metal fastener used to secure panels, trim and small components on appliances. It replaces missing or stripped screws to restore proper fit and reduce noise from loose parts. What it does

• Secures appliance panels, brackets and trim to prevent movement and rattling
• Holds small components in correct alignment for reliable operation
• Replaces lost, worn or stripped screws that cause gaps or loose fittings
• Common symptom link: fixes rattling panels, loose trim, or parts that shift during use

• One 8-18 x 9/16 screw

• Use the correct 8-18 driver bit and hand or low-torque power driver to avoid stripping
• Do not overtighten; snug until secure to prevent thread damage or panel deformation
• Turn power off/unplug appliance when installing near electrical components
• Keep extra screws on hand—hardware often comes in single quantities

A #8-18 x 9/16-inch hex washer head screw used to secure panels and components in appliances. Provides a proper fit for fast, reliable fastening when replacing missing, damaged, or stripped screws. What it does:

• Secures panels, brackets, and trim to keep components aligned and stable.
• Restores proper fastening when threads are stripped, the original screw is missing, or a head is damaged.
• Helps stop rattling or loose parts caused by worn or broken fasteners.
• Fits applications requiring a #8-18 thread with a 9/16" length and hex washer head style.

• Verify thread size, head style, and length before installation.
• Use the correct hex driver or socket to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or deforming parts.
• Disconnect power and follow appliance-specific safety steps.

A replacement fresh-food door handle that restores a secure grip and the finished look of the refrigerator door. Fits stainless finishes and replaces worn, cracked, or damaged handles to make daily use easier. What it does:

• Provides a sturdy grip for opening the fresh-food compartment door
• Replaces handles that are cracked, loose, or cosmetically damaged
• Restores proper alignment and ease of door operation when the original handle is broken
• Matches stainless finishes for a factory look

• Designed for direct replacement; use the factory mounting screws and brackets already on the door when present
• Turn off water/ice supply and empty door bins if they obstruct access before starting
• Handle small hardware carefully; keep screws and trim pieces together to avoid loss

The Vegetable Pan Assembly an OEM part for GE refrigerators. This assembly is specifically designed to fit on the right side of your refrigerator's vegetable pan, offering a convenient storage solution for your fresh produce. It provides a designated space to keep your produce separate and easily accessible, helping to maintain their freshness and quality.

A bad vegetable pan assembly can occur due to accidental damage, wear and tear, or other factors. If you notice symptoms such as cracks, broken tabs, or a loose fit on your current assembly, it may be time to replace it with a new one.

Symptoms of a bad vegetable pan assembly include:

• Cracks or damage
• Broken tabs
• Loose fit on the pan

Improve the organization of your fresh produce by replacing the faulty vegetable pan assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

8-18 hi/lo 5/8

This silicon controlled rectifier (SCR) is a replacement power-control semiconductor used to regulate current in appliance power circuits, helping restore proper operation of heating and motor circuits that rely on solid-state switching. What it does:

• Acts as a switch to control and modulate electrical current in the appliance power path
• Enables regulated power delivery to heating elements or motor circuits when driven by the control board
• Commonly replaced when the appliance shows intermittent power, no heat, or erratic on/off behavior in the affected circuit
• Works as a direct replacement for the OEM SCR with identical mounting and electrical fit when specified by part number

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Observe basic ESD precautions when handling the SCR and avoid touching semiconductor leads

This is a replacement round-head 10-32 x .353 screw used to fasten appliance panels and internal components. It restores secure mounting and helps stop rattling or loose parts caused by missing or worn fasteners. What it does:

• Secures panels, brackets, or small assemblies where a 10-32 machine screw is specified
• Stops movement and vibration that can cause noise or misalignment
• Replaces missing, stripped, or corroded fasteners to restore proper fit
• Matches the original fastener size and head style for correct clearance

• One 10-32 x .353 round-head screw

• Use the matching driver (typically a Phillips or slotted driver as required by the head) and avoid over-torque to prevent stripping
• Disconnect power and follow safety procedures when accessing internal components
• If other fasteners appear damaged or corroded, inspect and replace as needed

This element holder assembly secures an oven/range heating element and keeps it positioned for even heat delivery. It restores proper element alignment to reduce arcing and prevent rubbing or uneven baking. What it does:

• Secures the bake or broil heating element to the range/oven housing
• Keeps the element properly spaced for consistent heating performance
• Helps stop element movement, rubbing, or intermittent contact that can cause arcing
• Commonly replaced when the element is loose, misaligned, or makes noise during operation

• Disconnect power to the appliance before beginning any repair
• Handle heating elements carefully—sharp edges and fragile terminals can be damaged
• Verify element alignment and secure mounting hardware; replace only as needed
• If you see damaged element terminals or insulation, replace the element

The Dispenser Assembly is an OEM replacement part for GE refrigerators. This actuator is responsible for controlling the functions of the refrigerator's dispenser, allowing you to dispense water or ice.

A bad dispenser actuator assembly can occur due to wear and tear, damage, or component failure over time. If you notice symptoms such as the dispenser not responding to your input, loose or wobbly movement of the actuator, or the dispenser not dispensing water or ice properly, it may indicate a need to replace the actuator assembly.

Symptoms of a bad dispenser actuator assembly include:

• Unresponsive dispenser
• Loose or wobbly actuator movement
• Improper dispensing of water or ice

Restore your refrigerator's dispenser by replacing the faulty dispenser actuator assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This tube clamp secures flexible water tubing to its fitting in refrigerators. It helps maintain a tight seal to prevent leaks and keeps lines from slipping off under normal operating pressure.

• Holds plastic or rubber tubing firmly on a barbed fitting or nipple
• Helps prevent drips and leaks at tube connection points
• Addresses loose or disconnected water lines
• Useful when tubing slips off or won't stay seated

• Disconnect power and shut off the water supply before servicing
• Position the clamp over the tube and fitting; compress with pliers and release to lock in place
• Ensure the clamp is centered and fully seated; tug-test the tube
• Restore water and power; check all connections for leaks

This hinge cap is the small trim piece that covers your refrigerator door hinge. Replacing a cracked or missing cap protects the hinge from dust and restores a clean, finished look to the door area.

• Covers and protects the door hinge hardware from dust and debris
• Restores a clean, factory-finished appearance
• Helps keep the hinge area clear for smooth door movement
• Replace when the original cap is cracked, loose, discolored, or missing

• Disconnect power before servicing the appliance
• Support the door to prevent movement while working near the hinge
• Remove the old cap; align and press the new cap onto the hinge until fully seated; reuse the original fastener if your model uses one
• Verify the cap is secure and does not rub as the door opens/closes

This right-hand hinge top pin assembly supports and lets a refrigerator or freezer door pivot smoothly, restoring proper alignment and door operation. Use it to correct sagging, misaligned doors, or noisy pivoting. What it does:

• Provides the pivot point for the door's top hinge to enable smooth opening and closing.
• Restores proper door alignment to fix uneven gaps or doors that rub or stick.
• Helps eliminate grinding or squeaking noises from a worn or damaged hinge area.
• Supports the door weight to prevent further sagging or seal damage.

• Unplug the appliance or switch off power before servicing to reduce shock risk.
• Support the door when removing hinge fasteners to prevent dropping or damage.
• Use basic hand tools; follow OEM procedure for loosening/tightening hinge hardware and torque if specified by manufacturer.

This door case wiring harness connects the refrigerator door components to the main cabinet harness, restoring reliable power and signal routing for lights, dispensers, and sensors. Replaces a damaged or frayed harness to help resolve intermittent or non-working door functions. What it does:

• Transfers power and control signals between the door and cabinet wiring
• Restores operation for door-mounted lights, dispensers, and sensors affected by broken wiring
• Prevents shorts or intermittent failures caused by frayed or pinched wires
• Matches OEM routing and connector locations for a direct-replacement fit

• One door case wiring harness

• Disconnect power to the appliance before starting work to avoid shock or injury
• Handle connectors gently and route wiring per cabinet clips to avoid pinching
• Verify connector orientation and seating; secure any retained clips or screws

The Pcb Asm Humidity Board is an OEM part for GE refrigerators. This humidity control board regulates the humidity levels within the refrigerator's crispers or drawers. It allows you to adjust and maintain the ideal humidity level for different types of produce, extending their shelf life and preserving their quality.

Symptoms of a bad humidity control board include:

• Inconsistent humidity levels
• Excessive moisture buildup
• Rapid spoilage of produce

A bad humidity control board can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as inconsistent humidity levels, excessive moisture buildup, or produce spoiling quickly, it may be time to replace the humidity control board.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This left-hand door side assembly is the cabinet-mounted control panel support that secures the refrigerator's control and user-interface components for reliable operation and a finished door appearance. What it does:

• Provides the left-side mounting and housing for the fridge control panel and associated switches
• Keeps control components aligned and secured to the door for consistent operation
• Restores proper fit and finish when the original door-side control housing is cracked, loose or damaged
• Can help resolve symptoms like a loose control panel, rattling at the door edge, or exposed electronics

• One left-hand door side control assembly

• Disconnect power to the appliance before starting work to avoid electrical shock
• Remove door panels or trim as needed to access mounting screws; keep hardware for reassembly
• Align assembly carefully and tighten fasteners snugly but do not overtighten plastic threads