Pwe23kkskhss Parts

This left-hand door side assembly is the cabinet-mounted control panel support that secures the refrigerator's control and user-interface components for reliable operation and a finished door appearance. What it does:

• Provides the left-side mounting and housing for the fridge control panel and associated switches
• Keeps control components aligned and secured to the door for consistent operation
• Restores proper fit and finish when the original door-side control housing is cracked, loose or damaged
• Can help resolve symptoms like a loose control panel, rattling at the door edge, or exposed electronics

• One left-hand door side control assembly

• Disconnect power to the appliance before starting work to avoid electrical shock
• Remove door panels or trim as needed to access mounting screws; keep hardware for reassembly
• Align assembly carefully and tighten fasteners snugly but do not overtighten plastic threads

This right-side lower freezer drawer slide allows the freezer drawer to open and close smoothly and keeps the drawer aligned. Replaces a worn or damaged slide to restore stable drawer operation and prevent sticking or sagging. What it does:

• Guides and supports the lower freezer drawer for smooth in-and-out movement
• Replaces a broken, bent or worn right-side slide that causes the drawer to bind or drop
• Restores proper alignment so the drawer seals and closes evenly
• Works with the factory mounting points for a direct replacement

• Disconnect power to the appliance before removing drawers or service panels
• Remove the freezer drawer to access slide mounting screws; keep track of hardware
• Use appropriate hand tools; avoid forcing components to prevent damage

This 90° connector redirects a 5/16 in. line to a right-angle orientation for a neater, space-saving fit and a secure tube connection. Designed to restore proper routing where a straight join won't fit. What it does:

• Provides a right-angle connection for 5/16 in. tubing or line runs
• Keeps tubing routed close to the appliance to avoid kinks and strain
• Helps maintain a sealed joint to reduce risk of leaks at the turn
• Used where space constraints require a compact, 90° tube connection

• Shut off the water supply (and power if working near electrical components) before replacing the part.
• Inspect tubing ends and replace any damaged or corroded sections before installing the connector.
• Hand-start fittings, then tighten per manufacturer guidance; avoid over-tightening which may damage tubing.
• After installation, restore supply and check the joint for leaks before returning the appliance to normal use.

This is a replacement round-head screw sized 10-24 x 5/8 in. It secures trim, panels, and internal components so parts stay aligned and appliances run quietly and safely. What it does

• Fastens panels, brackets, and trim pieces in place
• Prevents loose parts that can rattle or cause misalignment
• Replaces missing or stripped screws to restore secure mounting
• Works where a 10-24 x 5/8 round-head screw is required

• Disconnect power before servicing the appliance
• Use the proper screwdriver or nut driver to avoid stripping the head
• Align parts before tightening and thread gently to avoid cross-threading
• Do not over-tighten; stop when snug to prevent panel distortion

This 1/4-20 hex washer head screw secures panels and components in place, restoring proper fit and eliminating movement. It fits common appliance assemblies that use a 7/8" long, 1/4-20 threaded fastener. What it does:

• Fastens panels, brackets, and assemblies that use a 1/4-20 thread
• Restores secure fit when original screw is missing, stripped, or loose
• Helps stop rattling, vibration, and misalignment caused by loose hardware
• Matches common OEM head style for tool-ready installation with a socket or wrench

• Disconnect power to the appliance before servicing where applicable
• Use the correct 1/4-20 socket or wrench; install hand-tight then snug—do not overtighten
• Replace like-for-like: head style, thread size, and length before installing
• If fastener holes or threads are damaged, repair or retap before reuse

A left-hand closure door assembly that replaces a worn or broken door closure to restore proper sealing and smooth drawer/door operation. Helps stop drafts and keeps compartments closing correctly for reliable performance. What it does

• Guides and supports the left-side door/drawer as it closes to ensure proper alignment.
• Helps form a tight seal to reduce air leakage and maintain interior temperature.
• Prevents rattling or catching that can occur when the closure is damaged or worn.
• Commonly replaced when the door doesn't stay closed, binds, or leaves a visible gap.

• Disconnect power to the appliance before starting any repair.
• Basic hand tools are typically required; access may involve removing a drawer or trim panel.
• Handle parts carefully to avoid damaging surrounding panels or gaskets.

A left-hand hinge center assembly that secures the refrigerator door at the center hinge to restore proper support and alignment. Replaces a worn or damaged hinge center to reduce door sagging and improve smooth opening. What it does:

• Provides a stable pivot point at the door's center hinge for correct alignment and support.
• Helps stop door binding, uneven gaps, and rubbing by restoring proper hinge geometry.
• Transfers load between upper and lower hinge halves so the door closes and seals correctly.
• Designed as a direct-replacement service part matching OEM fit and function.

• Support the door before starting—remove or brace the door to prevent it from falling.
• Disconnect power to the appliance if working near electrical components or the light switch.
• Remove hinge fasteners and replace with the new hinge center; tighten hardware securely but do not over-torque.
• Check door alignment and operation after installation; adjust hinge mounting as needed for an even gap.

This trough drain collects and channels defrost water from the freezer evaporator to the drain tube, helping prevent pooled water and icing in the freezer compartment. Designed to match OEM fit and function for a direct replacement. What it does

• Captures defrost meltwater from the evaporator area and directs it to the drain system
• Helps prevent water pooling and ice buildup around the evaporator and freezer floor
• Restores normal defrost drainage when original trough is cracked, warped, or clogged
• Works with the freezer's drain heater and drain tube to keep water flowing during defrost cycles

• One trough drain

• Remove power to the appliance before accessing the evaporator/freezer cavity
• Replacement may require partial disassembly of interior liners, shelves or evaporator cover; follow OEM service instructions
• Inspect and clear the drain tube and drain heater when replacing the trough to ensure full system function

This left-side freezer bracket slide secures and guides a freezer shelf or drawer, restoring stable support and smooth movement. Replaces a broken or worn slide to keep freezer shelving aligned and functioning. What it does:

• Supports the left side of a freezer shelf/drawer and guides sliding motion
• Prevents shelf sagging, misalignment, or catching when opening/closing
• Replaces cracked, bent, or missing brackets that allow shelves to drop
• Helps restore even weight distribution for safe storage

• Disconnect power before servicing and work with the freezer empty and temperature stabilized
• Remove freezer drawers/shelves for access; keep track of fasteners
• Use basic hand tools; align bracket before tightening to avoid binding

This stainless-steel freezer drawer front restores the exterior appearance and provides a clean, durable surface for the freezer drawer. Ideal when the original front is dented, scratched or cosmetically worn. What it does:

• Replaces the outer front panel for the freezer drawer to restore proper fit and appearance
• Provides a smooth, corrosion-resistant stainless finish that matches other stainless surfaces
• Helps maintain proper drawer alignment and tactile operation when the original front is bent or damaged
• Improves the refrigerator's visual appeal after front panel damage or wear

• Unplug the appliance or disconnect power before starting any repairs
• Remove the freezer drawer and any interior bins to access fasteners; handle and trim may need removal
• Use appropriate hand tools and protect surrounding surfaces from scratches during installation

This inverter compressor kit replaces a failed inverter-type compressor assembly to restore cooling performance in compatible refrigerators. Designed to match the OEM function and maintain efficient temperature control when the original compressor fails. What it does:

• Replaces the refrigerator's inverter compressor assembly to restore sealed-system compression
• Helps resolve symptoms like no cooling, warm fridge/freezer, or loud/different compressor noise when diagnosis confirms compressor failure
• Works with inverter-driven refrigeration systems that require a matched compressor module
• Intended for use only when compressor/isolation parts are confirmed to be the failed component

• Requires proper evacuation, recharge, and leak testing per EPA and OEM guidelines
• Ensure electrical isolation and follow lockout/tagout before servicing

This silicon controlled rectifier (SCR) switches and regulates power to heating or motor circuits, helping the appliance control temperature and run cycles reliably. It's a direct-fit electronic switching component used in a variety of control systems. What it does:

• Acts as an electronic switch to regulate AC power to heating elements or motors
• Helps control temperature output and maintain consistent cycle performance
• Can prevent unwanted continuous current flow when functioning properly
• Commonly replaced when ovens, ranges, or dryers fail to heat or cycle correctly

• One silicon controlled rectifier (SCR) as shown

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle the SCR by its body; avoid touching terminals and static-sensitive areas
• Verify proper orientation and secure mounting; follow OEM wiring and torque practices

A replacement 1/4-20 screw that secures panels, brackets, and components on compatible appliances for reliable fit and safe operation. Use this fastener to restore proper assembly and reduce rattles or loose parts. What it does:

• Threads into 1/4-20 tapped holes to hold panels, braces, or hardware
• Restores secure attachment where a missing or stripped screw allowed panels or trim to shift
• Helps eliminate vibration noise caused by loose fasteners
• Matches OEM fit for correct alignment and clearance

• Disconnect power to the appliance before servicing to avoid electrical hazards
• Use the correct driver or socket to avoid stripping the head
• Start threads by hand to prevent cross-threading; tighten securely but do not overtighten
• Keep hardware and small parts away from children and pets

A hex washer-head screw that secures panels and components in household appliances, helping restore stable, rattle-free mounting. Ideal when a mounting screw is missing, stripped, or rusted. What it does:

• Fastens panels, brackets, and internal components with a 1/4-20 thread for secure connections
• Replaces missing or damaged screws that cause loose panels or vibration noises
• Restores proper alignment of parts to prevent rattling and wear
• Works where a hex washer-head profile is required for flush, locked seating

• One hex washer-head screw, 1/4-20 x 3/4

• Use the correct 1/4-inch hex or socket driver to avoid stripping the head
• Power off and unplug the appliance before accessing internal components
• Do not overtighten; snug until secure to avoid damaging threads or parts
• If screw threads are damaged, replace with the matching OEM part for best fit

This PEX water line provides a flexible, durable water supply connection for compatible appliances, restoring proper water delivery for dispensers and ice makers. It resists kinking and corrosion for reliable flow. What it does:

• Carries potable water from the household supply to the appliance water valve or dispenser.
• Restores water flow when the original line is cracked, pinholed, or damaged.
• Helps prevent leaks compared with brittle or corroded rigid tubing.
• Supports normal dispenser and ice maker operation when installed correctly.

• One PEX water line.

• Turn off and disconnect the water supply and power before starting work.
• Drain remaining water from the line and fittings to avoid spills.
• Use the correct fittings and follow manufacturer torque recommendations; hand-tighten then final snug with wrench.
• After installation, slowly restore water, check all connections for leaks, and test dispenser/ice maker operation.