Pye22kynefs Parts

This coupler is a small connector used in refrigerators to join two mating parts within an assembly. Replacing a worn or damaged coupler restores a secure connection and reliable operation at that joint.

• Connects and secures two mating components within the appliance
• Helps transfer motion or maintain a sealed connection, depending on the application
• Common symptoms include a loose/slipping connection, unusual noise, or leaks at the joint
• Replace if cracked, stripped, or no longer holding securely

• Disconnect power; if working on the water system, also shut off the household water supply
• Note the original orientation/positions before removal for accurate reassembly
• Seat parts fully; for push-in connections, insert straight and perform a light tug test to engagement
• Restore power (and water, if applicable), then test operation and inspect the joint for leaks or slippage

This guide roller is used in the vegetable/crisper pan area. It supports and guides the drawer along its track so it glides smoothly and stays aligned when opening and closing, replacing a worn, cracked, or missing roller.

• Supports the vegetable/crisper pan on its slide path to reduce friction
• Helps the drawer roll in and out smoothly and evenly
• Maintains alignment to prevent binding, sagging, or the pan dropping off the track
• Common symptoms: drawer hard to open/close, wobbles, scrapes, or a visibly broken/missing roller

• Disconnect power before servicing
• Remove the crisper drawer and cover/shelf as needed for access
• Detach the damaged roller from its mount and attach the new roller securely
• Reinstall components, confirm smooth, even travel, and test drawer operation

Vacuum break valve for refrigerator drain helps stop siphoning and keeps defrost and condensation water flowing to the drain pan. Replacing a failed valve restores proper condensate drainage and can reduce leaks and standing water. What it does:

• Allows air into the drain line to break siphoning and maintain steady condensate flow.
• Directs defrost and condensation water to the drain pan to prevent pooling and ice buildup.
• Helps address symptoms such as slow draining, water under crisper/behind kick plate, and intermittent leaks.
• Simple, passive valve with no electrical components.

• Disconnect power (unplug or shut off breaker) before accessing internal components.
• Access the drain area per your model—typically near the evaporator or rear—remove panels carefully to reach the valve.
• Install with correct orientation and secure tubing connections; replace any cracked or brittle drain tubing.

This trough drain directs defrost water from the evaporator to the refrigerator drain system, helping prevent water buildup and puddling inside the freezer compartment. It's a direct-fit replacement for the damaged or cracked drain trough. What it does:

• Channels defrost and condensation water away from the evaporator area to the main drain
• Prevents ice buildup and water pooling that can lead to floor or compartment leaks
• Restores proper drain flow when original trough is cracked, warped, or clogged
• Works with the refrigerator's defrost cycle to keep the compartment dry

• One trough drain piece

• Disconnect power to the appliance before starting any work
• Remove stored food and secure shelving or trim that blocks access to the evaporator area
• Inspect and clear the drain path and drain tube while installing the new trough

This ice funnel kit replaces the plastic chute that guides cubes from the freezer ice maker to the dispenser or storage bin, helping restore reliable ice delivery and reduce jams or spills. Fits select GE refrigerators. What it does:

• Guides ice from the ice maker to the bin or dispenser, preventing cubes from scattering
• Helps reduce ice jams and blockages that can stop dispensing
• Restores proper alignment so ice drops cleanly into the bin or auger path
• Compatible with common symptoms like ice falling beside the bin, partial dispensing, or noisy impact

• Disconnect power to the refrigerator before servicing to avoid injury
• Typical install requires removing the ice maker and/or bin to access the funnel; follow OEM service instructions
• Inspect surrounding mounts and fasteners; replace any damaged clips to ensure secure fit

This screw set replaces worn or missing fasteners used on the freezer door assembly to restore secure attachment of door components. Ideal for fixing loose panels and reducing rattling so the door sits and seals properly. What it does:

• Secures freezer door components and trim to the door assembly.
• Restores proper fit and alignment when screws are corroded, stripped, or missing.
• Helps eliminate door rattles and loose panels that can affect door seating.
• Matches OEM fastener type and lengths used on the freezer door assembly.

• Screw set for freezer door

• Disconnect power and empty the door area before starting work.
• Use the correct screwdriver or bit to avoid stripping heads; install screws until snug—do not overtighten.
• Keep removed parts in order and follow OEM instructions for reassembly.

This is a replacement #8-18 by 1/2-inch appliance screw used to secure panels, trim, and internal components. It restores proper fastening where the original screw is missing, stripped, or corroded. What it does:

• Fastens panels, brackets, trim pieces, and small components
• Restores secure mounting when a screw is missing or worn
• Stops rattling and vibration caused by loose or stripped fasteners
• Compatible with applications that call for a #8-18 x 1/2" screw

• One screw (8-18 x 1/2 in)

• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; stop when the component is snug to prevent damage
• If screw threads are damaged, replace with the correct thread size rather than forcing
• Disconnect power before working on electrical components or panels that expose wiring

This E-clip is a small metal retaining ring that secures shafts, pins, and other round components in appliance assemblies, helping keep moving parts properly seated and preventing unwanted disassembly. What it does:

• Clips onto a shaft or pin to hold components in place and maintain alignment
• Prevents parts from sliding off during operation, reducing noise and wear
• Common symptom: loose or rattling components where a retaining clip is missing or damaged
• Common symptom: assembly falling apart or not engaging correctly due to a failed clip

• One E-clip

• Small part — use needle-nose pliers or snap-ring pliers to install and keep fingers clear
• Disconnect power and/or water to the appliance before servicing to avoid injury
• Wear safety glasses to protect against the clip snapping during installation

This trough drain collects and channels defrost water from the freezer evaporator to the drain tube, helping prevent pooled water and icing in the freezer compartment. Designed to match OEM fit and function for a direct replacement. What it does

• Captures defrost meltwater from the evaporator area and directs it to the drain system
• Helps prevent water pooling and ice buildup around the evaporator and freezer floor
• Restores normal defrost drainage when original trough is cracked, warped, or clogged
• Works with the freezer's drain heater and drain tube to keep water flowing during defrost cycles

• One trough drain

• Remove power to the appliance before accessing the evaporator/freezer cavity
• Replacement may require partial disassembly of interior liners, shelves or evaporator cover; follow OEM service instructions
• Inspect and clear the drain tube and drain heater when replacing the trough to ensure full system function

The Left Door is an OEM replacement part for GE refrigerators. It is designed to fit the left side of the refrigerator, providing a secure seal and easy access to the contents inside.

A bad left door can occur due to factors such as wear and tear, damage, or misalignment. If you notice symptoms such as air leaks, difficulty in opening or closing the door, or condensation forming on the interior, it may indicate a faulty or malfunctioning left door.

Symptoms of a bad left door include:

• Air leaks around the door seal
• Difficulty in opening or closing the door
• Condensation forming on the interior

Restore your refrigerator by replacing the faulty left door with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This gasket seals the fan-front housing in the appliance to help maintain proper airflow and reduce air bypass. Replacing a worn gasket restores a tight seal for more consistent cooling and quieter operation. What it does:

• Seals the fan/front housing to prevent air leakage that can disrupt airflow and cooling
• Cushions the fan assembly to help reduce vibration and noise caused by a loose or damaged seal
• Helps maintain proper circulation so the refrigeration system can run efficiently
• Can prevent moisture buildup and reduce frost in the fan area when sealing is restored

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Remove access panels or shelving as needed to reach the fan housing; keep hardware for reassembly
• Inspect the mating surfaces and clean away debris before installing the new gasket for a proper seal
• Repair those before installing the gasket

This is a replacement bottom divider basket. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace a cracked or defective divider basket in a variety of different refrigerator models. This divider basket is intended for the bottom drawer of the refrigerator.This divider slots into the center of the bottom refrigerator basket. It can be used to divide the basket drawer into two sides to keep food separated and organized. Over time and with regular use, the divider can become broken or cracked and will require replacing. For safety purposes, always ensure the refrigerator is completely disconnected from its power source before starting any repair work. No special tools are needed to install this part; simply slot the divider into place. Please make sure to follow appropriate safety precautions when attempting to fix any appliances. For more accurate information on how and where to install this bottom divider basket, the appropriate owner's manual and included diagrams should be referred to.As an authentic replacement part, this divider basket is suitable for use on several different models of refrigerators manufactured by General Electric and Hotpoint. This is a genuine part made of high-quality, durable plastic and is sold individually.