Rb720dhww Parts

This guard terminal protects and covers exposed wire terminals to help prevent accidental contact and shorting. It's a simple replacement that restores the original terminal protection for safe operation. What it does:

• Covers and insulates exposed appliance wire terminals to reduce risk of shorts and arcing
• Helps prevent accidental contact with live terminals during use or service
• Commonly replaced when terminal guard is cracked, melted, or missing
• Restores proper routing and protection of terminal connections

• One guard terminal

• Disconnect power to the appliance before inspecting or replacing terminals
• Remove any panels necessary to access the terminal area; avoid stressing wires or connectors
• Verify the guard aligns with the terminal block and secures over the exposed terminals
• If terminals or wiring show heat damage or corrosion, replace those components.

This main top is the cooktop surface that supports burners and cookware, restoring a flat, stable surface for safe cooking and easy cleanup. It replaces damaged, warped, or rusted tops to improve burner alignment and appliance appearance. What it does:

• Provides the flat surface that holds burners, grates, and cookware in correct position
• Protects internal components from spills, grease, and debris
• Restores proper burner alignment and spacing for even heating
• Improves appearance by replacing scratched, dented, or corroded tops

• Disconnect power to the range; shut off gas supply before servicing gas ranges
• Handle the top carefully to avoid cuts or damage; use two people for heavy or awkward tops
• Remove burner grates, knobs, and any retaining screws or clips per your model's service instructions
• Reinstall all removed components and test burners for proper operation after replacement

A small rubber bumper that cushions contact points to reduce noise and prevent wear on moving appliance parts. Fits where a soft stop or spacer is needed to protect surfaces and quiet door or panel movement. What it does:

• Acts as a shock absorber to cushion impact between moving parts or panels
• Reduces rattling and vibration for quieter operation
• Prevents metal-to-metal contact that can cause surface wear or chipping
• Maintains proper spacing where a soft stop or spacer is required

• Typically presses or snaps into a mounting hole or onto a stud; orientation before installing
• Clean mating surfaces to ensure a secure fit and proper adhesion if applicable
• Replace only when the old bumper is cracked, flattened, or missing
• Disconnect power and remove any obstructing panels if working near electrical components

This is a replacement screw used to secure appliance panels and small components. It restores proper fastening and helps eliminate loose parts, rattling, or misaligned panels for a tight, safe fit. What it does:

• Secures panels, trim, brackets, or small assemblies to restore proper alignment
• Stops rattling or vibration caused by missing or loose fasteners
• Provides the correct threaded fastening where the original screw is lost or damaged
• Matches OEM fastening function for reliable reassembly

• Disconnect power or unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread the screw in by hand first, then tighten snugly—do not overtighten to avoid stripping or cracking
• Keep small parts away from children and pets during installation

This painted screw head is a cosmetic and protective cap that restores the finished look where a visible screw is used. It covers the screw head and helps match surrounding black trim for a clean appearance. What it does:

• Covers and conceals a screw head to improve appearance of panels, trim, or bezels
• Helps protect the screw head from direct exposure and reduces visible wear
• Used when trim or panels show exposed or mismatched screw heads
• Common fix when screw heads are scratched, discolored, or visually distracting

• Use the matching screw and press or snap the cap into place over the screw head
• Disconnect power and remove any panels only as recommended by your appliance manual before working near electrical components
• Avoid forcing or prying the cap; if tight, gently ease it on to prevent breakage
• Replace any damaged caps with the exact part to maintain fit and finish

This is a right-side guide support that secures and aligns a sliding component so drawers or shelves operate smoothly and stay on track. Replaces a worn or broken guide support to restore proper movement and seating. What it does:

• Holds the right-side guide rail or track in place so the drawer or shelf slides evenly
• Prevents the drawer or shelf from sagging, binding, or falling off the track
• Restores proper alignment when the original guide is cracked, broken, or worn
• Works with the existing rail, clips, and mounting hardware to maintain smooth travel

• Disconnect power or unplug the appliance before accessing internal components
• Access may require removing the drawer, shelf, or front panel—use basic hand tools
• Inspect related clips, rails, and fasteners and replace any damaged pieces for best results

This bracket base is a replacement support bracket that secures and stabilizes appliance components, helping restore proper alignment and reduce movement. Use it to replace a cracked, bent, or missing base bracket for safe, stable operation. What it does:

• Provides a sturdy mounting point to secure panels, assemblies, or controls
• Restores proper alignment when a worn or damaged bracket allows shifting
• Helps eliminate vibration or rattling caused by loose support hardware
• Prevents further wear by re-establishing correct component positioning

• One bracket base

• Disconnect power to the appliance before beginning any repair
• Verify orientation and fastener locations against the appliance diagram before removal
• Use the correct size screwdriver or socket to avoid stripping fasteners
• Handle edges carefully and wear gloves; replace any damaged fasteners or clips

The Oven Door Hinge is an OEM part for GE ranges. It is responsible for securely yet smoothly opening and closing the oven door. The hinge plays a crucial role in the operation and functionality of the oven by ensuring the door moves freely while remaining tightly sealed when closed.

Causes of a bad door hinge include wear and tear over time, repeated opening and closing of the door putting stress on the hinge mechanism, or accidental damage.

Symptoms of a bad door hinge include:

• The door not opening or closing fully
• Difficulty in moving or swinging the door
• Loss of the secure seal when closed causing heat leakage
• Excessive movement, wobbling, or noise from the door

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement leveling leg threads into the base of your range to stabilize the cabinet and adjust height. Replacing a damaged or missing foot stops rocking and restores a level, safe installation. What it does:

• Threads into the base to support the appliance and provide leveling adjustment
• Helps correct wobble, rocking, or uneven gaps when the unit is out of level
• Helps maintain proper door alignment and safe anti-tip engagement when adjusted correctly
• Replaces leveling feet that are broken, stripped, or missing

• One leveling leg

• Disconnect power; for gas ranges, also shut off the gas supply
• Protect flooring; carefully tilt or raise the appliance to access the leg
• Unthread the old leg; hand-thread the new leg and adjust until level front-to-back and side-to-side
• For freestanding ranges, the anti-tip bracket is fully engaged before use

This control panel overlay (T09) is the decorative touchpad face that covers and protects the appliance's control buttons while keeping printed labels readable. It restores a clean, legible control surface for accurate operation. What it does

• Protects the underlying control board and buttons from spills, dirt, and wear
• Provides labeled touchpoints so controls are easy to read and use
• Helps resolve issues where worn or faded markings make buttons hard to identify
• Maintains the original appearance of the control panel

• One control panel overlay (T09)

• Designed to fit over the existing control assembly; follow OEM alignment marks during replacement
• Use gentle pressure to seat the overlay; avoid sharp tools that could scratch or damage the face
• Disconnect power to the appliance before beginning work to prevent electrical shock
• If adhesive backing is present, clean the mounting surface first for best adhesion

This right-side door end cap provides a finished edge and secure mounting point for the outer oven/stove door trim, restoring fit and appearance. Use it to replace a cracked, loose, or missing end cap and reduce rattling or gaps. What it does:

• Covers and protects the outer door edge while anchoring the trim for a proper door fit
• Restores the door's finished appearance when the original cap is cracked, broken, or faded
• Helps eliminate noise or vibration caused by a loose or damaged end cap
• Maintains alignment so the door trim and handle sit correctly

• Designed to install on the outer door edge; confirm right-side orientation before starting
• Remove door trim screws or clips as required; keep hardware separate and reuse if intact
• Use basic hand tools; avoid force that can damage surrounding trim or finish
• Disconnect power to the appliance and allow surfaces to cool before beginning work