Rbs 305 Pdq 12 Parts

This bracket base is a replacement support bracket that secures and stabilizes appliance components, helping restore proper alignment and reduce movement. Use it to replace a cracked, bent, or missing base bracket for safe, stable operation. What it does:

• Provides a sturdy mounting point to secure panels, assemblies, or controls
• Restores proper alignment when a worn or damaged bracket allows shifting
• Helps eliminate vibration or rattling caused by loose support hardware
• Prevents further wear by re-establishing correct component positioning

• One bracket base

• Disconnect power to the appliance before beginning any repair
• Verify orientation and fastener locations against the appliance diagram before removal
• Use the correct size screwdriver or socket to avoid stripping fasteners
• Handle edges carefully and wear gloves; replace any damaged fasteners or clips

This replacement oven insulation helps contain heat inside the oven cavity for more consistent cooking and protects surrounding panels from excessive heat. It restores the original thermal barrier when damaged or deteriorated. What it does:

• Replaces worn or torn oven cavity insulation that can allow heat to escape
• Helps maintain stable oven temperatures during baking and broiling
• Reduces heat transfer to exterior panels and nearby components
• Can address symptoms such as long preheat times, hot cabinet surfaces, or a noticeable draft of heat from the oven

• Disconnect power to the appliance and ensure the oven is completely cool before beginning.
• Wear gloves and eye protection; insulation fibers can irritate skin and lungs.
• Remove any retaining clips or fasteners and carefully position the new insulation without compressing it; reattach hardware as originally installed.

This is the inner oven door glass—the heat-resistant window pane on the inside of the door. Replacing a cracked or cloudy pane restores safe heat retention and a clear view of your food while it cooks.

• Forms the inner thermal barrier of the oven door to contain heat
• Provides the viewing window so you can monitor cooking
• Damage can lead to heat loss, longer preheat times, or a hotter-than-normal door exterior
• Visible cracks, shattering, or fogging/stains between panes are common signs this part may be needed

• Disconnect power and, if applicable, shut off gas; let the oven cool completely
• Removing the door from the hinges simplifies service; support it on a padded surface
• Wear cut-resistant gloves; handle glass by the edges and clean the frame before install
• Reassemble in original order and avoid overtightening retainers to prevent stress cracks

This terminal block assembly provides a secure, insulated connection point where the appliance's incoming power leads join the internal wiring harness. Replacing a damaged or heat-worn block restores reliable power flow and helps prevent overheating at the connection. What it does:

• Connects incoming line, neutral, and ground conductors to the internal wiring
• Provides an insulated barrier to prevent shorts at the power-entry point
• Helps resolve no power or intermittent power issues
• Addresses visible heat damage, melted terminals, or burning odor at the cord connection

• 1 terminal block assembly

• Disconnect power at the breaker or unplug the appliance before servicing
• Photograph existing wiring and transfer one wire at a time to maintain correct positions
• Tighten terminals securely; replace any overheated ring lugs or damaged wiring
• Ensure no bare copper is exposed and reinstall any covers or shields before restoring power

This replacement leveling leg threads into the base of your range to stabilize the cabinet and adjust height. Replacing a damaged or missing foot stops rocking and restores a level, safe installation. What it does:

• Threads into the base to support the appliance and provide leveling adjustment
• Helps correct wobble, rocking, or uneven gaps when the unit is out of level
• Helps maintain proper door alignment and safe anti-tip engagement when adjusted correctly
• Replaces leveling feet that are broken, stripped, or missing

• One leveling leg

• Disconnect power; for gas ranges, also shut off the gas supply
• Protect flooring; carefully tilt or raise the appliance to access the leg
• Unthread the old leg; hand-thread the new leg and adjust until level front-to-back and side-to-side
• For freestanding ranges, the anti-tip bracket is fully engaged before use

This 24-inch door liner panel restores the interior surface of a single oven door, protecting internal insulation and providing a finished look. It replaces a cracked, dented or heat-damaged liner so the door seals and operates correctly. What it does

• Replaces the oven's interior door surface to protect insulation and inner components.
• Restores a smooth, secure surface that helps the door close evenly and maintain heat containment.
• Helps eliminate rattles, light leaks, or visible damage from a compromised liner.
• Matches factory fit and attachment points for a straightforward replacement.

• One 24-inch oven door liner panel

• Turn off power to the appliance before beginning any repair and allow the oven to cool fully.
• Remove the oven door per the manufacturer's instructions to access and replace the liner; retain all screws and mounting hardware.
• Handle edges carefully and support the liner to avoid bending or damage during installation.

This anti-tip bracket assembly helps secure a freestanding range to the floor or wall to reduce the risk of the appliance tipping forward. It provides a simple, permanent mounting point to improve stability and user safety. What it does:

• Secures the range's rear/base to the floor or wall to help prevent forward tipping
• Reduces risk of the range sliding or shifting when doors or drawers are opened
• Addresses symptoms like an appliance that tilts or feels unstable when weight is applied to the door
• Required safety hardware for proper installation after moving or servicing a range

• Turn off power (and gas if applicable) and disconnect the appliance before moving it to access the mounting location
• Slide the range forward carefully to access the installation area; use safe lifting practices or have an assistant
• Fasten bracket to floor or wall per the appliance's installation instructions and local codes using appropriate hardware
• Verify the range is seated onto the bracket and check stability before returning the appliance to normal use

This is a replacement vent tube designed to route exhaust air and restore proper ventilation in the appliance. Replacing a damaged or clogged vent tube helps maintain airflow and reduces the risk of moisture buildup or heat retention. What it does:

• Channels exhaust or vented air away from the appliance to maintain proper airflow
• Helps prevent moisture buildup and related odors when ventilation is impaired
• Can reduce overheating or performance issues caused by restricted venting
• Restores a secure path for airflow when the original tube is cracked, collapsed, or disconnected

• Disconnect power to the appliance before beginning work; for gas appliances, turn off the gas supply.
• Use basic hand tools and avoid sharp edges on sheet-metal near the vent opening.
• Ensure all connections are seated and sealed per the appliance diagram to prevent air leaks.

This replacement exhaust vent directs oven/dryer exhaust airflow away from the appliance to maintain proper ventilation and reduce backflow. Restores intended airflow path to help reduce odors and heat buildup around the appliance. What it does

• Channels exhaust fumes and hot air out of the appliance's vent path.
• Helps restore proper ventilation when previous vent is cracked, warped, or blocked.
• Can reduce abnormal heat, odors, or poor drying/cooking performance tied to ventilation issues.
• Limits airflow leak points that can cause noise or vibration during operation.

• One exhaust vent housing.

• Disconnect power (and gas, if applicable) before starting work.
• Inspect and replace any worn gaskets, clamps, or vent hose to ensure a proper seal.

Color: Black. Right hand side.