Regal Food Processor K7755 Parts

This blower is the rotating wheel that moves air through the dryer to support proper drying and venting. Replacing a worn or damaged blower restores airflow for more efficient, consistent drying performance. What it does

• Spins to pull air from the drum through the heater and out the vent
• Restores normal airflow when a blower wheel is cracked, broken, or missing fins
• Helps reduce long dry times, overheating, or unusual noises caused by a failing blower
• Works with the dryer motor and housing to maintain proper ventilation

• One blower wheel

• Disconnect power to the dryer before starting any repair
• Access typically requires removing the dryer front or rear panel and detaching the drum or blower housing
• Inspect the motor shaft and mounting hardware; replace any worn fasteners or bearings as needed

This hex flange nut secures components where a broader bearing surface is needed to resist loosening and distribute load. It fits 10-32 threaded studs and is used on fastened assemblies in appliances. What it does:

• Provides a secure threaded connection for 10-32 screws and studs
• Flange spreads clamping force to reduce panel or bracket damage
• Hex shape allows tightening with a wrench for a reliable hold
• Commonly replaces worn or missing nuts that cause loose panels or rattling

• One hex flange nut

• Use the correct 10-32 screw or stud and hand-start threads to avoid cross-threading
• Tighten with an appropriately sized wrench; do not overtighten to prevent thread or part damage
• Disconnect power and follow appliance safety instructions before servicing
• Replace only like-for-like; confirm size and thread match your application

This replacement 10-24 x 3/8 machine screw secures panels, brackets, and small components in compatible Frigidaire appliances. It restores proper fastening where a missing or damaged screw allows parts to shift or rattle. What it does:

• Fastens metal or plastic appliance parts such as trim, brackets, or small assemblies
• Helps eliminate movement, rattling, or loose connections caused by missing or stripped screws
• Restores safe, secure mounting for controls and hardware
• Matches OEM size for proper fit in designated threaded holes

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or nut driver to avoid stripping the head
• Start threads by hand to ensure alignment; tighten until snug — do not over-tighten
• Replace any stripped mating hardware or use correct thread engagement for secure fit

The Lens is an OEM component for Frigidaire freezers. It acts as a transparent cover and protective barrier for the freezer compartment lights. Crafted for durability and clarity, the lens avoids frost and minimizes condensation while allowing visibility inside the freezer.

Causes of a bad lens can include deep scratches or cracks developing over time from repeated wiping or exposure to chemicals like frost removers.

Symptoms of a bad freezer lens include:

• Cloudiness, fogginess, or smears inhibiting internal visibility
• Cracks or breaks compromising the protective barrier
• Distorted views make it difficult to assess food levels
• Diffused lighting with shadows instead of a clear view

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This is a 10-24 x 1/2 inch machine screw used to secure temperature probes, thermistor brackets, shields and drawer/box components. It provides a simple, reliable fastener for small appliance assemblies. What it does:

• Secures probe or thermistor brackets to the appliance chassis or housing
• Holds shielding or small drawer/box parts in place to prevent movement or rattling
• Helps maintain correct sensor positioning so temperature readings stay stable
• Common replacement when a stripped, corroded, or missing screw causes loose parts or vibration

• One 10-24 x 1/2 in. screw

• Use the matching 10-24 threaded hole; avoid over-tightening to prevent stripping or cracking nearby plastic
• If replacing a corroded screw, inspect mating threads and components for damage before reuse
• Turn off and unplug the appliance or disconnect power before accessing internal components

This horizontal louver directs airflow inside the appliance to help even cooling and prevent direct blasts on food. It restores proper air distribution when vent fins are broken or stuck. What it does:

• Guides refrigerator/freezer airflow for more even temperature distribution
• Replaces cracked, warped, or missing horizontal vent slats
• Helps reduce cold spots caused by misdirected air
• Visible damage or a louver that won't hold position are common symptoms

• One horizontal louver

• Disconnect power before servicing to avoid electrical hazards
• Remove nearby shelves or drawers for access if needed
• Typically snaps or slides into the vent housing; align and seat gently to avoid breaking tabs
• Inspect surrounding clips and housing; replace if damaged

This Guide Assembly, Air is an OEM part designed specifically for LG air conditioning units. Its primary function is to facilitate proper airflow direction and distribution within the air conditioning system, ensuring optimal cooling or heating performance.

Over time, this part may encounter issues due to extended usage or physical damage, leading to potential misalignment or restriction of airflow. Moreover, the accumulation of dust, dirt, or debris within the assembly can impede its functionality, ultimately affecting the unit's overall efficiency.

Symptoms indicating a bad guide assembly, air include:

• Inadequate cooling or heating output
• Uneven air distribution across the room
• Unusual sounds emanating from the air conditioning unit during operation
• Visible signs of damage or misalignment in the guide assembly

This OEM LG part is also compatible with some Sears/Kenmore models.

This clamp secures a line or connection inside your appliance, maintaining a tight fit under vibration. Replacing a fatigued clamp helps prevent leaks or disconnections and keeps components anchored so the system operates reliably.

• Holds a line/fitting firmly to keep the joint sealed and secure
• Helps prevent leaks or disconnections at hose/tube connections
• Resists vibration that can loosen fittings during operation
• Replace if bent, weakened, or corroded, or if the connection repeatedly loosens

• Disconnect power and, if applicable, shut off water supply before service
• Note clamp orientation and routing; seat the clamp just behind the fitting bead/stop
• Use the correct tool for your clamp style to compress or tighten evenly
• After reassembly, restore utilities and test for leaks or movement

This shoulder screw secures moving or fixed appliance components by providing a built-in spacer and pivot point for proper alignment and smooth operation. It restores correct fit where a worn or missing shoulder fastener causes play. What it does:

• Provides a precision spacer and pivot for hinges, drawers, or linkage assemblies
• Holds components at the correct distance to prevent rubbing and binding
• Helps stop wobble, misalignment, rattling, or uneven movement when the original shoulder screw is worn or missing
• Works where a headed screw with an integrated shoulder is required for smooth rotation or exact spacing

• One shoulder screw

• Disconnect power and remove the appliance panel or access covers before replacing hardware
• Handle small parts carefully to avoid dropping them into assemblies; magnetic pickup tool can help
• Install in the original location and tighten securely but avoid overtightening; do not modify the shoulder or thread
• If the screw secures a load-bearing hinge or mechanism, verify alignment and operation after installation