Rga824dedww Parts

Restore reliable lighting and heat in your gas oven with this glowbar igniter. When energized, it heats up to ignite the oven burner, eliminating no-heat and slow-preheat issues caused by a weak or failed igniter.

• Heats and glows to ignite the oven's gas burner
• Can glow without lighting the burner, or fail to glow at all
• May cause long preheat times or intermittent heating

• Disconnect electrical power and shut off the gas supply before servicing
• Allow the oven to cool completely; handle the igniter carefully and avoid touching the element
• Secure wiring and connectors away from hot surfaces; ensure solid connections
• Restore gas and power, then test for prompt, consistent ignition

This thermostat knob assembly replaces a worn or missing oven temperature control knob. It restores a secure, easy-to-turn control so you can select baking temperatures as intended and safely return the control to OFF when not in use.

• Mounts on the oven thermostat shaft to set and adjust temperature
• Direct replacement for a cracked, stripped, loose, or missing knob
• Use when the knob slips, rotates without engaging, falls off, or is difficult to turn
• Restores user control feel; will not resolve heating issues caused by other components

• Turn off power and let the appliance cool; shut off gas supply for gas models
• Pull the old knob straight off the thermostat shaft—do not pry against the control panel
• Align the new knob with the shaft and press straight on until fully seated
• Verify pointer alignment with OFF/temperature markings before use

This broil pan is the oven tray designed to catch drippings and hold food while broiling, making cleanup easier and helping food brown under high heat. Fits compatible GE ovens that use this factory broil pan. What it does:

• Holds food close to the broiler element for searing and browning.
• Collects grease and drippings to reduce smoke and make cleanup faster.
• Supports broiling racks or grids (when used with compatible inserts).
• Helps maintain consistent broil performance when the correct pan is in place.

• One broil pan (1 piece)

• Allow the oven to cool and disconnect power before handling or installing parts.
• Slide the pan onto the oven broil supports or into the broiler compartment until seated.
• Use oven mitts when removing after use; clean per manufacturer recommendations.

This small rubber grommet cushions and secures a range or oven door handle, helping keep the handle stable and reducing wear where the handle meets the door. It restores a snug fit and quiet operation. What it does:

• Acts as a protective bushing between the handle and door to prevent metal-on-metal contact
• Helps stop a loose, wobbly, or rattling handle
• Reduces wear on mounting holes and finish around the handle
• Provides a tight, vibration-dampening fit for the handle assembly

• Disconnect power to the appliance before starting any work
• Typically a simple press-fit replacement; handle removal may be required for access
• Inspect surrounding fasteners and mounting surfaces; replace damaged parts as needed

A replacement cooktop grate assembly that supports cookware and restores a level cooking surface. Designed to fit directly on the cooktop so pots and pans sit securely and heat evenly. What it does:

• Supports cookware over the burner for safe, stable cooking
• Replaces broken, warped, or missing grates that cause wobbling
• Helps maintain correct pot-to-flame placement for even heating
• Reduces risk of cookware sliding or tipping while cooking

• Allow cooktop and burners to cool completely before handling.
• Remove old grate and set the new grate into position; no special tools typically required.
• Inspect burner caps and ignition ports for debris before use.
• Use non-abrasive cleaners and avoid dropping or striking the grate to prevent damage.

This oven burner assembly replaces a worn or damaged bake burner to restore reliable oven heating for gas ranges. Designed as a direct-fit assembly, it provides the burner tube and components needed for ignition and even baking performance. What it does

• Supplies the main bake flame for the oven cavity so the oven reaches and maintains cooking temperatures.
• Replaces cracked or corroded burner tubes that cause weak or no flame.
• Helps correct uneven heating or poor baking results linked to burner damage.
• Works with existing ignition and gas valve systems when properly installed.

• One complete oven burner assembly.

• Turn off gas supply and electrical power before beginning any service.
• Handle the burner and igniter carefully; avoid bending or damaging the tube or orifices.

This replacement screw secures trim and appliance panels with a compact 3/8" length and #8-18 thread, providing a simple fastener solution for loose or missing hardware. Fits a variety of appliance assemblies where short machine screws are used. What it does

• Fastens panels, trims, brackets, and small components that use #8-18 threaded holes
• Restores secure attachment for loose or rattling parts
• Replaces stripped or missing short screws to prevent gaps or movement
• Small size is suited for shallow mounting areas and sheet-metal attachments

• One screw

• Use the correct driver or bit to avoid stripping the head; a magnetic screwdriver helps with small fasteners
• Tighten until snug—do not overtighten to prevent thread damage or panel deformation
• Disconnect power to the appliance before working on internal components or near electrical connections
• Match those details for best fit and performance