Rgbs300dr1bb Parts

The Mini Valve Knob is an OEM replacement part for GE ovens and ranges. This small but crucial component allows users to control the oven's gas flow or temperature settings with precision. The knob fits onto the valve stem and provides a user-friendly interface for adjusting cooking settings.

You should replace the mini valve knob if it becomes worn, cracked, or damaged. Causes of a bad valve knob can include regular use, physical damage from accidental impacts, or exposure to high temperatures that can cause the plastic to degrade.

Symptoms of a bad Mini Valve Knob include:

• The knob not turning smoothly or becoming stuck
• Cracks or breaks in the knob
• Difficulty in adjusting the gas flow or temperature settings
• The knob slipping or not fitting securely on the valve stem

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: Black. This large cap measures about 3-1/2 inches in diameter.

The Orifice Spud is an OEM part for GE ranges and cooktops. It is a small, precise component responsible for regulating the flow of gas to the burner, ensuring a controlled and efficient flame for cooking. This spud is essential for maintaining the correct gas pressure and flame size.

Over time, orifice spuds can become clogged or damaged due to residue buildup, corrosion, or improper cleaning. These issues can lead to inefficient burner performance or safety hazards.

Symptoms of a bad orifice spud include:

• Uneven or weak burner flames
• Difficulty in igniting the burner
• Yellow or flickering flames
• Gas odors near the burner area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

LP Gas. LG .99mm

The Front Orifice Holder is an OEM component specifically designed for GE range burners. Located under the cooktop, it serves as the mounting bracket that secures the front orifice at the base of each burner head. 

Symptoms of a bad front orifice holder include:

• Flames that appear crooked or uneven from the burner 
• Gas flames that sway or blow around excessively
• Difficulty adjusting the burner flame height or pattern 

Over time and repeated heating cycles, the metal holder can warp or distort from heat exposure. Motion from burner head adjustment may also cause bracket weakness. This genuine GE replacement part installs with ease and ensures precise positioning of flame origination points. Proper orifice placement afforded by the front holder optimizes burner combustion and safety. Compatible GE, Kenmore, and select electric range brands include Monogram, GE Café, and Profile models.
 

This line cord supplies electrical power from the wall outlet to the appliance. Replacing a worn, cut, or heat-damaged cord restores safe, reliable power and can help resolve no-power or intermittent operation issues.

• Delivers AC power from the outlet to the unit's electrical system
• Helps correct no-power or intermittent power when the cord is moved
• Ideal replacement for cords with cuts, fraying, or burn/discoloration on the plug
• Supports proper grounding and safe operation when installed correctly

• Disconnect power before servicing; ensure the appliance is fully de-energized
• Match wire routing and connections to the product's wiring diagram; ensure a secure ground
• Use an appropriate strain relief if required by the product to prevent abrasion
• Route the cord away from sharp edges, moving parts, and hot surfaces

The HV Electrodes and Harness Assembly is an OEM part for GE gas ranges. It transmits high-voltage electricity to strategically placed components.

Symptoms of a bad HV electrode and harness include: 

• Unpredictable or incomplete heating within oven cavity sections   
• Error codes related to HV delivery issues preventing bake/broil
• Frayed, loose, or water-damaged wiring presenting shock hazards

Causes involve normal wear to materials transmitting continuous high voltage. Exposure to condensation or food spillages can damage insulation prematurely as well.

This part is also compatible with Hotpoint, RCA, and select Kenmore models.

Color: White

This receiver hinge is the fixed bracket in the oven frame that the door's hinge arm locks into. Replacing a worn receiver helps the door close squarely and seal correctly for safe, efficient cooking.

• Anchors the door hinge arm to the oven frame
• Keeps the door aligned and supported during opening and closing
• Wear or damage can cause a door that won't close fully or sits uneven
• May lead to heat escaping or a loose, wobbly door feel

• Disconnect power; if a gas range, shut off gas and allow the unit to cool completely
• Remove the door to access the hinge receivers in the frame
• Install the new receiver in the same orientation; ensure the hinge arm is fully seated
• Check door alignment and closure before returning to service

The Valve Control Assembly is an OEM component specially designed for GE gas wall ovens and ranges. Located at the rear of the unit, it houses the gas valve, piezo igniter, and control logic that regulates the flow of fuel to each active burner.

Symptoms of a bad valve control assembly include:  

• Unstable or irregular burner flame heights and patterns
• Burners failing to ignite or stay lit as intended 
• Gas leak smells detected around rear connection fittings
• Error codes or dysfunction of baked-on cleaning modes

As a critical safety device, the valve assembly must operate precisely cycle after cycle. Causes like thermal stress or electrical faults can induce failures over the years. This genuine GE replacement facilitates dependable and code-approved gas control. Compatible GE gas wall oven and range brands including Monogram ensure trusted and safe daily cooking performance.
 

Replacement oven temperature control knob that mounts on the thermostat shaft. Restores smooth, accurate temperature selection when the original knob is cracked, stripped, loose, or missing, so you can reliably set your oven for baking or broiling.

• Attaches to the oven thermostat/control shaft to set cooking temperatures
• Replaces cracked, broken, missing, or loose knobs that spin without turning the control
• Restores proper pointer alignment with OFF and temperature markings
• Provides a secure, smooth-turning grip for everyday use

• Turn the appliance off and allow it to cool; disconnect power before servicing
• Pull the old knob straight off the shaft—do not pry against the control panel
• Align the flat/keyed side of the new knob with the shaft and press on firmly
• Test through temperature settings

This anti-tip bracket secures the rear of your range to the floor or wall so the rear leveling leg locks in place. Replacing a missing or damaged bracket helps prevent tipping and keeps the appliance stable during everyday use.

• Anchors the range to a fixed point; rear leveling leg engages the bracket
• Helps prevent forward tipping when weight is placed on an open oven door
• Reduces rocking or sliding during cooking or cleaning
• Replace if the bracket is missing, bent, corroded, or the unit fails the anti-tip check

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the range straight out; position the bracket per your installation manual/template
• Fasten the bracket securely to floor or wall studs using hardware appropriate for your surface
• Slide the range back so the rear leg fully engages the bracket; perform the anti-tip test from your manual

This round gas valve controls flow to a surface burner, providing smooth flame adjustment and reliable shutoff. Replace a worn valve to restore precise burner control and safe operation on your gas range or cooktop.

• Regulates gas to the burner as the control knob turns, from low simmer to full flame
• Common symptoms: burner won't light though the igniter sparks, flame won't adjust or shut off, gas odor near the knob, or a stiff/stripped valve stem
• Services one burner position; multiple valves are used on many gas ranges/cooktops
• Installs in the burner manifold/orifice holder location specified by the manufacturer

• Disconnect power and shut off the gas supply before servicing
• Note stem orientation; transfer fittings/brackets from the original valve as needed and use approved thread sealant where specified
• After installation, leak-test all joints with an approved solution before restoring gas
• Verify proper ignition and flame adjustment on the burner after replacement

The Clip Igniter is an OEM replacement part for GE ranges.

This GE OEM replacement is also compatible with some Hotpoint, Sears Kenmore, and RCA models. 

The Valve Control Assembly is an OEM component specially designed for GE gas wall ovens and ranges. Located at the rear of the unit, it houses the gas valve and igniter that regulates the flow of fuel to each active burner.

Causes of a bad valve control assembly include cracking or fractures of internal gas tubing from repeated thermal expansion and contraction over many years. Damage may also occur from impact or rough handling during appliance installation.  

Symptoms of a bad valve control assembly:

• Burners failing to ignite or stay lit as intended
• Gas leak smells detected around rear connection fittings  
• Error codes or displays showing blocked valves
• Inability to select or operate specific burners/oven functions

This genuine GE replacement facilitates code-compliant performance through an engineered life-cycle of on/off cycles. Compatible GE, Monogram, and other premium brand gas models are safely supported.
 

This factory fastener secures internal components or panels in your appliance. Replacing a missing or stripped screw restores a snug fit, helps prevent vibration or rattling, and keeps assemblies aligned for proper operation.

• Secures brackets, panels, or internal components to the frame
• Replaces missing, rusted, or stripped hardware
• Helps reduce rattling, vibration, or loose-fit issues
• Maintains proper alignment and fit of assemblies

• Disconnect power before servicing
• Use the correct driver to avoid stripping the screw head
• Install in the original location; match thread and length to the original
• Tighten until snug; do not overtighten, especially into plastic or thin metal