Rgbs300dr1bb Parts

This cable clamp secures the appliance power cord where it enters the cabinet, protecting wiring from pull and chafe for safer, more reliable operation. Designed to hold the cord firmly in place and prevent accidental disconnection. What it does:

• Acts as a strain relief to prevent the power cord from pulling into or away from the appliance
• Protects wiring from abrasion and sharp edges at the entry point
• Helps maintain a secure electrical connection to reduce intermittent power issues
• Commonly used where the cord passes through a rear or bottom access panel

• Disconnect power before inspecting or replacing the clamp to avoid shock or injury
• Install at the cord entry so the clamp captures the cord jacket; tighten fastener securely but do not over-torque
• Verify the cord is correctly routed and not pinched when reassembling panels
• If any wiring or the cord jacket is damaged, replace the cord before restoring power

The GE Front Orifice Holder-Left is an OEM part for GE gas ranges. It secures the front left burner's gas orifice nozzle to properly regulate fuel delivery.

Symptoms of a bad front orifice holder include:  

• Burning or fire hazards if gas leaks around the holder's joint
• Inability to adjust the flame height or heat level on that burner  
• Uneven heating performance between the front left burner and others

Causes may include cracks, corrosion or material fatigue developing in the holder over many heating and cooling cycles. Mineral deposits could also potentially cause issues. 

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas ranges.

The Burner/Oven Assembly is an OEM part for GE gas ranges. It holds ignition and valve components over lower cooking surfaces. 

Causes of failure include deterioration of high-temperature seals from repeated heating cycles, stripped mounting points from frequent removal/cleaning access, and impact damage to housing structures.

Symptoms of a faulty burner/oven assembly are:

• Gas leaks around burner bases or control knobs
• Unstable or irregular flame sizes lacking responsiveness   
• Potential safety hazards from exposed connections or cracks 

This OEM part is compatible with Hotpoint and RCA gas range models as well.

This small replacement bumper cushions and protects the appliance frame/trim where panels meet, helping reduce vibration, chipping and rattles for a cleaner, quieter fit. Ideal when the original bumper is worn, cracked or missing. What it does:

• Cushions contact between the frame/trim and adjacent panels to reduce noise and prevent damage
• Helps maintain proper panel alignment and sealing where the trim meets the cabinet
• Reduces rattling or vibration caused by loose or degraded trim pads
• Restores protective spacing that prevents chips or scratches to finished surfaces

• One frame front bumper

• Disconnect power to the appliance before starting work and follow all safety precautions
• Usually installs by pressing into a slot or onto a mounting surface after removing the trim piece; some trim removal may be required
• Inspect mating surfaces for damage or debris and clean before installing the new bumper
• Replace with the exact part number only; do not force or modify the bumper to fit

This is a replacement front drawer panel that restores the exterior finish and proper fit of the appliance drawer. It's a straightforward cosmetic and structural replacement that helps the drawer close and align correctly. What it does:

• Replaces a dented, scratched, cracked or bent drawer front to restore appearance
• Provides the mounting surface and attachment points for the drawer assembly and handle
• Helps the drawer sit and close flush with surrounding cabinetry/appliance openings
• Prevents further damage from a compromised front that can catch or snag

• Disconnect power to the appliance or follow the manufacturer's service safety recommendations before starting.
• Remove drawer contents and follow service manual steps to detach the drawer assembly; may require removing screws, clips or trim pieces.
• Transfer handle or trim to the new panel; verify fasteners and alignment before final tightening.

This is an upper door hinge that secures a refrigerator/freezer door to the cabinet and allows smooth pivoting. Replacing a worn hinge restores proper door alignment and helps stop rubbing, sagging or uneven closing. What it does:

• Secures the top of the door to the cabinet frame and provides the pivot point for opening and closing
• Restores correct door alignment when the door sag, bind, or rub against the cabinet
• Helps eliminate gaps that can cause cold air loss or uneven sealing
• Durable metal construction designed for reliable, long-term support

• One upper door hinge

• Always unplug the appliance or disconnect power before starting repairs
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use common hand tools; follow torque recommendations from the manufacturer and avoid over-tightening

This burner box harness routes power and signals to a cooktop's burner box components so sparking, ignition, and safety switches work correctly. Replaces a damaged or burned harness to restore proper electrical connections at the burner area. What it does

• Provides the wiring connections between burner-box components (igniters, switches, sensors and valves) and the main appliance wiring.
• Enables reliable spark and ignition by delivering power to igniters and safety circuitry.
• Helps prevent intermittent or failed ignition caused by frayed, burned, or loose wiring.
• Resolve symptoms such as no spark at burners, burners that won't light consistently, or visible wire damage in the burner box area.

• Disconnect electric power before starting work.
• Take photos of existing routing and connector locations to ensure correct reinstallation.
• Replace only if wiring, insulation, or connectors are visibly damaged or failing; match connector shapes and pin counts.

This panel side foil is a decorative side trim that restores the appliance's finished appearance and helps protect the cabinet edge from everyday wear. It's a direct-replacement exterior trim piece. What it does

• Covers and protects the outer edge of the appliance panel or door to maintain a clean, finished look
• Hides scratches, nicks, or peeled paint along the panel edge
• Restores consistent appearance after panel or door repair or replacement
• Keeps the cabinet edge sealed from light contact and minor abrasion

• One panel side foil

• High-level replacement: remove the outer panel or door to access the existing foil before installing the new piece
• Use care to avoid scratching the new foil during installation; soft cloths and non-marring tools recommended
• If adhesive or fasteners are present on the original, remove old adhesive residue and follow OEM attachment method

The GE Range Support Base is an OEM replacement part for GE wall ovens and ranges. It provides critical support and stability for the appliance, ensuring safe and reliable operation. 

Causes of a bad support base could include cracks or breaks in the material over time due to repeated stresses and strains from the heavy appliance above it. The base may also become damaged or unstable if the unit is moved incorrectly and suffers impact.

Symptoms of a failing support base include:

• The oven or range rocking or becoming unlevel during use  
• Noisy or squeaking sounds coming from the base
• Visible cracks or weaknesses in the material
• The appliance seeming loose or unstable on the countertop or floor

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.