Sears Kenmore Elite Parts

This damper controls airflow between compartments to help maintain proper temperatures and consistent cooling. It replaces a worn or broken damper to restore normal airflow and temperature balance inside the appliance. What it does:

• Regulates air flow between compartments so the refrigerator can maintain set temperatures
• Helps reduce uneven cooling and temperature swings caused by a stuck or broken damper
• Works as part of the appliance's air distribution system to route cooled air where needed
• Common symptom: compartment temperature too warm or inconsistent airflow noise from the damper area

• One damper assembly

• High-level replacement; access usually requires removing interior panels or duct covers
• Disconnect power before any repair to avoid shock or injury
• Handle with care to avoid bending or damaging mounting tabs and linkage

This is a replacement screw used to secure appliance panels and components. It restores proper fastening so panels, trim, or assemblies stay tight and reduce vibration or rattling. What it does

• Fastens panels, brackets, or trim to the appliance chassis
• Helps stop loose or vibrating panels and trim pieces
• Restores proper alignment where a missing or stripped screw causes gaps or movement
• Use when the original screw is missing, damaged, or corroded

• One replacement screw as shown

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep removed screws in a safe place; this screw matches the original before installation

This cover assembly protects the machine components and helps keep internal machinery free of debris and accessible for repair. It provides a durable barrier that helps extend component life and maintains safe operation. What it does:

• Shields motors, belts and internal linkages from dust and lint that can cause wear
• Helps contain moving parts to reduce pinch or contact hazards during normal use
• Maintains proper component alignment by providing a stable mounting surface
• Commonly replaced when cracked, warped, missing fasteners, or damaged from impact

• One cover assembly as shown

• Disconnect power before attempting service
• Handle gently to avoid cracking plastic tabs; inspect mounting clips and screws for damage
• Reuse original fasteners only if undamaged; replace any stripped screws or broken clips

This door gasket assembly replaces a worn or damaged refrigerator door seal to help restore an airtight seal and maintain proper cooling. A properly seated gasket reduces drafts, moisture intrusion, and energy loss. What it does:

• Seals the refrigerator door to keep cold air in and warm air out.
• Helps prevent frost buildup and moisture accumulation inside the compartment.
• Reduces compressor run time and energy usage caused by a leaking seal.
• Addresses symptoms such as warm spots, visible gaps around the door, or condensation on the door edges.

• Disconnect power to the appliance and remove food from the door area before starting.
• Inspect the door flange for damage and clean the mounting surface to ensure a proper seal.
• Seat the gasket fully into the channel; some models require loosening or removing trim screws to install.
• If the door does not close evenly after installation, check hinge alignment and adjust per the OEM instructions.

This guide assembly is a replacement plastic mounting guide that helps align and secure TV internal components and panels for stable operation and fit. Replacing a damaged guide restores proper panel alignment and reduces rattles. What it does

• Positions and supports TV panels or internal modules to maintain correct alignment
• Keeps components from shifting, which can cause rubbing, noise, or uneven gaps
• Helps ensure consistent fit of the bezel and display assembly after reassembly
• Restores secure mounting where original guide is cracked, broken, or missing

• One guide assembly

• Disconnect power and remove the TV from its stand or wall before starting
• Partial disassembly of bezel or rear cabinet is typically required; keep track of screws and clips
• Handle the panel and internal cables carefully to avoid damage; wear an anti-static wrist strap if available
• Test fit before final reassembly and power-up to proper alignment

This front plate assembly replaces the damaged or worn front-facing plate on compatible LG appliances, restoring the unit's appearance and protecting internal components. It's a direct-fit exterior panel used where the front surface is cracked, dented, or missing. What it does:

• Covers and protects internal components behind the appliance's front area
• Restores a uniform exterior finish and eliminates gaps or exposed parts
• Helps maintain proper alignment of adjacent trim and controls
• Suitable when the visible front surface is cracked, dented, or cosmetically damaged

• One front plate assembly as shown

• Installation typically requires removing adjacent trim and fasteners
• Handle edges carefully and support the assembly to avoid scratching finishes
• Disconnect power to the appliance before beginning work to prevent injury
• If clips or screws from the original assembly are worn or missing, replace them with OEM-specified fasteners

This fan guide is the molded support bracket that positions and protects the refrigerator/freezer evaporator or condenser fan blade, helping maintain proper airflow and reduce noise from the fan assembly. Designed to fit into the fan housing area. What it does:

• Holds the fan blade and motor assembly securely in the correct position for consistent airflow
• Directs airflow across the evaporator or condenser for efficient cooling performance
• Helps prevent fan blade contact with other components, reducing rubbing noise and wear
• Keeps debris away from the fan to protect the motor and prolong fan life

• One fan guide/support bracket

• Disconnect power to the appliance before inspecting or replacing the part
• Access may require removing interior panels or the rear access panel depending on model
• Verify correct orientation and secure mounting; do not force the part into place
• Test fan operation after reassembly to confirm proper fit and clearance

This genuine replacement knob shutter restores the control panel's knob opening and protects internal switches from debris while allowing knobs to engage properly. It helps maintain smooth knob operation and reduces dirt buildup behind the control surface. What it does:

• Covers the knob opening and guides the control knob into place for reliable engagement
• Protects internal switches and electronics from dust, crumbs, and spills
• Helps prevent accidental knob movement when not in use
• Restores proper fit and appearance of the control panel area

• One knob shutter

• Power off and unplug the appliance before beginning any work to avoid electrical shock
• Small fasteners or clips may need to be removed; use appropriate hand tools and keep track of hardware

A replacement freezer tray that restores a level, secure surface for frozen foods and helps contain spills in the freezer compartment. Fits where the factory storage pan has cracked, warped, or failed. What it does:

• Provides a flat, durable surface to hold frozen foods and packages
• Contains minor spills to help keep the freezer interior cleaner
• Replaces cracked, warped or broken freezer pans that no longer seat properly
• Helps maintain organized storage and prevents items from shifting

• Disconnect power to the appliance before any service to avoid electrical hazards
• Remove food, shelves, and drawers that block access to the tray area
• Slide or snap the tray into place; do not force—verify it seats securely and level

This oven heating element replaces the failed bake element to restore even cooking heat in electric ovens. It delivers reliable surface heating where the original element no longer reaches or maintains set temperatures. What it does:

• Heats the oven cavity during bake cycles so food cooks and browns properly.
• Commonly used when the oven takes too long to heat or won't reach temperature.
• Can help correct uneven baking or cold spots caused by a broken element.
• Works as a direct replacement for a damaged, visibly burned, or open-circuit bake element.

• One oven bake heating element.

• Disconnect power to the appliance at the breaker before starting work.
• Handle carefully; heating elements are fragile and can be damaged by rough handling or bending.
• Verify proper fit and terminal connections match the original element before securing.

This broiler insert is the oven pan insert that sits under the broiler burner to catch drips and help direct heat for even browning. It restores a stable cooking surface and keeps the broiler area cleaner. What it does:

• Holds food and catches grease and drips during broiling to prevent mess and flare-ups
• Directs heat from the broiler for consistent browning and searing
• Replaces damaged, warped, or corroded inserts that cause uneven cooking
• Helps prevent food from falling into the burner area

• One broiler insert

• Disconnect power to the appliance and allow the oven to cool completely before servicing
• Remove oven racks and slide the old insert out; position the new insert so it seats securely in the broiler cavity
• Wear heat-resistant gloves when testing the broiler after installation and inspect for proper fit before use
• Do not modify the part; use only as designed for the oven broiler assembly

This door hinge restores proper door alignment and smooth opening/closing for compatible refrigerators. Replaces a worn or damaged hinge to reduce sagging and help the door seal correctly. What it does

• Provides the pivot point that lets the refrigerator door open and close smoothly.
• Restores proper door alignment to improve sealing and temperature control.
• Commonly replaces hinges that are bent, cracked, noisy, or causing a sagging door.
• Helps eliminate rubbing, scraping, or binding during door movement.

• Disconnect power to the appliance and empty or support the door before removing the old hinge.
• Use appropriate hand tools; two-person assistance is recommended for lifting or aligning the door.
• Follow the manufacturer's service instructions and torque specs when reinstalling fasteners.

This drain tray assembly collects and directs moisture and condensate to the drain system, helping prevent leaks and pooling under the appliance. Designed to fit the appliance's drain path and restore proper drainage. What it does:

• Captures condensate and channel water toward the drain to reduce standing moisture.
• Helps prevent water from pooling under components that could cause corrosion or odors.
• Restores proper drain routing after a damaged or cracked tray is removed.
• Works with existing hoses and clips to maintain normal drainage performance.

• Disconnect power and water before beginning repair.
• Remove access panels or components as needed to reach the drain tray; keep fasteners organized.
• Inspect surrounding seals, hoses, and clips and replace any worn parts to ensure a watertight fit.
• Reassemble panels and test the appliance for proper drainage and leaks before returning to service.