Sf25t251eu Parts

This orifice is the small gas-port insert that meters natural gas to a stove or range burner so the flame burns correctly. It replaces a worn or damaged spud to restore proper burner ignition and heat control. What it does:

• Regulates natural gas flow to a specific burner for proper combustion
• Helps maintain a steady, even flame and consistent cooking temperatures
• Can resolve weak or uneven flames, burner that won't light cleanly, or flame instability
• Used where a specific size spud/orifice is required for natural gas operation

• Turn off gas supply and unplug the appliance before servicing
• Remove burner head and cap to access and replace the orifice; use hand tools and avoid overtightening
• Verify this orifice matches the required size for the burner and your gas type

Replacement burner orifice (1.25) that controls gas flow to the burner for proper flame and cooking performance. Use when an orifice is clogged, damaged, or the wrong size for correct burner output. What it does:

• Regulates gas flow to the burner so the flame burns steadily and the cooktop reaches expected heat.
• Helps correct weak, uneven, or sooty flames and inconsistent burner heating when the orifice is the cause.
• Restores proper burner output after clogging, corrosion, or damage from wear or debris.

• Turn off the appliance power and shut off the gas supply before replacing.
• Verify the orifice size required for your fuel type and appliance before installation; do not file or modify the part.
• Tighten securely but avoid overtightening; check all connections for leaks after installation using an approved leak-detection method.
• If you smell gas or suspect a leak, turn off the gas immediately.

This rear venturi tubing directs water flow and helps create the suction needed for proper drain and recirculation functions in the washer. Replacing a worn or cracked venturi restores reliable water flow and reduces leaks or siphoning issues. What it does:

• Channels water to the venturi assembly to help create suction for proper draining and recirculation
• Prevents leaks and unwanted siphoning when intact
• Helps maintain correct water flow during fill and drain cycles
• Can cause filling/draining problems or gurgling noises when cracked or clogged

• Disconnect power and turn off water supply before starting any repair
• Access may require removing the washer cabinet or rear panel; follow your service manual
• Inspect clamps and adjacent hoses; replace clamps if corroded or damaged
• Replace with this OEM venturi tubing for best fit

This ground wire provides a safe chassis connection to restore proper grounding and reduce shock and electrical-fault risk. It replaces a frayed, corroded or missing ground lead to help keep the appliance electrically safe. What it does

• Connects the appliance chassis to the grounding system to prevent stray voltage on metal surfaces
• Restores a secure ground path if the original wire is broken, loose, or corroded
• Helps stop intermittent power faults or nuisance tripping caused by a compromised ground
• Addresses symptoms like visible wire damage, loose ground connection points, or grounding-related electrical issues

• One ground wire

• Always disconnect power (unplug or shut off the circuit breaker) before starting work
• Attach the ring/terminal ends to the designated chassis ground screw and the equipment ground point
• Route the wire away from moving parts, heating elements, and sharp edges; secure with existing clips or fasteners
• If terminal hardware is missing or damaged, replace with equivalent OEM-style fasteners and torque to specification

This burner baffle sits under the cooktop burner to direct heat and protect surrounding components, helping maintain even flame distribution and preventing debris from falling into the burner area. What it does:

• Shields the area under the burner from spills, grease and food debris.
• Helps route heat and combustion gases away from sensitive components.
• Supports stable burner operation and consistent heating performance.
• Commonly replaced when warped, corroded or damaged by spills.

• Turn off gas and power to the appliance before servicing; follow all safety precautions.
• Remove burner grates and caps to access the baffle; use basic hand tools.
• Inspect surrounding components (burner head, igniter) while the baffle is removed.

This wire harness assembly routes power and signals between the appliance control and internal components, restoring reliable electrical connections for proper operation. Designed as a direct plug-in replacement to replace a damaged or worn wiring assembly. What it does:

• Provides factory-style electrical connections between the control board and powered components
• Carries control signals and power so motors, heaters, lights, or sensors operate correctly
• Common symptom: appliance won't start or specific functions are unresponsive
• Common symptom: intermittent operation or visible damaged/burned wires/connectors

• Disconnect the appliance from power (unplug or turn off breaker) before starting
• Compare new harness to the original to ensure connector types and routing
• Route and secure harness away from moving parts and heat sources per service instructions
• If terminals are corroded or connectors damaged, replace the harness rather than attempting repairs

This replacement burner orifice controls the flow of natural gas to a cooktop or range burner so the appliance lights and burns with the correct flame size. Fits one burner and restores proper gas delivery. What it does:

• Regulates gas flow to a single burner for correct flame height and heat output
• Used where a worn or clogged spud causes weak, uneven, or yellow flames
• Commonly replaced when a burner won't light reliably or produces poor combustion
• Ensures the burner receives the correct orifice opening for natural gas operation

• Turn off gas supply and power to the appliance before servicing.
• Gas fittings should be tightened and tested for leaks.
• Do not file, drill, or modify the orifice; use the correct OEM part for safe operation.
• Test all burners after installation to ensure proper ignition and flame pattern.

This spud orifice regulates the flow of natural gas to a burner, helping maintain the correct flame size for safe, efficient cooking. It replaces worn or damaged orifices to restore reliable ignition and burner performance. What it does:

• Meters natural gas to the burner to produce the proper flame for cooking
• Helps maintain consistent heat output and stable ignition
• Commonly replaced when flames are weak, uneven, yellow-tipped, or the burner won't light reliably
• Compatible with factory burner assemblies that use a spud-style orifice

• Turn off gas supply and unplug the appliance before servicing
• Use appropriate tools; avoid overtightening the orifice when installing
• After installation, check for gas leaks and proper burner operation before regular use

This genuine ground screw secures appliance grounding connections to the chassis, helping maintain electrical safety and reliable grounding. It's a direct-fit fastener used where a secure ground point is required. What it does:

• Provides a secure chassis grounding point for appliance electrical safety
• Secures ground wires or grounding straps to sheet metal or grounding posts
• Helps prevent loose ground connections that can cause intermittent faults or safety risks
• Matches OEM thread and length for correct fit and electrical contact

• Use appropriate tools; avoid stripping the head or over-tightening which can damage threads or the grounding surface
• Ensure the mating surfaces are clean and free of paint or corrosion for good electrical contact
• Disconnect power to the appliance before servicing electrical grounding connections

Standard aluminum surface burner that replaces a damaged or worn top burner to restore even, stable cooking heat and cookware support. Installs on the cooktop to bring back predictable heating performance. What it does:

• Provides the primary cooking heat under pots and pans on the cooktop surface.
• Replaces warped, cracked, or worn burners that cause uneven heating or poor cookware contact.
• Restores consistent flame/contact for more even cooking and safer operation.
• Sits into the burner socket for a secure fit with the existing cooktop hardware.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Handle carefully — edges may be sharp; use gloves if needed.
• Align and seat the burner into the socket; verify secure connection and proper seating before restoring power.

This orifice is the small, precision gas fitting that meters fuel to a single burner for correct combustion and stable flame. It restores proper burner performance and helps maintain consistent heating. What it does:

• Controls gas flow to a burner so the flame size and heat output are correct
• Helps produce an even, stable flame for reliable cooking or heating
• Can address symptoms like weak or uneven flames, poor ignition, or burners that won't maintain heat
• Works with the burner tube and valve as part of the gas delivery system

• Turn off the gas supply and unplug the appliance before starting work
• Use the correct orifice size and tighten to OEM torque; loose or damaged fittings can leak
• After installation, check all connections for gas leaks with a soap solution or approved leak detector