Sge53u52uc/Cp Parts

The operating module is the appliance's electronic control board for the user interface. It reads your control inputs and communicates with the main control so programs select and run predictably. Replace a failed module to restore consistent panel response.

• Processes control-panel inputs and manages cycle/program selection
• Communicates with the main control to execute start, pause, and option commands
• Drives control-panel indicators or display feedback
• Common failure symptoms include unresponsive buttons, no lights/beeps at the panel, intermittent inputs, or inability to start a cycle

• Disconnect power at the breaker before servicing
• Use ESD protection; handle the board by its edges
• Photograph connectors and transfer wiring one at a time to the same locations
• Ensure ribbon/plug connectors are fully seated and harnesses aren't pinched before restoring power

This genuine bearing supports smooth, low-friction rotation of a moving component inside your appliance. Replacing a worn bearing restores quiet, consistent operation and helps protect the shaft and housing from accelerated wear.

• Provides radial support and alignment for a rotating shaft or arm
• Reduces friction to improve efficiency and minimize noise
• Helps prevent wobble and uneven wear on mating parts
• Typical signs of wear: grinding/squealing sounds, rough or seized rotation, excessive play

• Disconnect power and water supply and allow hot components to cool
• Access the assembly; note the original bearing's orientation and depth
• Inspect the shaft and housing; replace if grooved, bent, or heat-damaged
• Press the new bearing in squarely; avoid striking the inner/outer race and verify free rotation before reassembly

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This regeneration valve directs brine through your dishwasher's built-in water softener during recharge cycles, helping prevent hard-water film and spotting. Replacing a faulty valve restores consistent softening and better cleaning results.

• Opens to route salt brine through the ion-exchange resin during regeneration
• Helps maintain proper water hardness feeding the wash system
• Failure can lead to white film/spots, cloudy glassware, mineral buildup, and reduced cleaning
• Also contributes to inconsistent softener performance over time

• Disconnect power and turn off the water supply before servicing
• Access location varies by model; note hose routing and valve orientation during removal
• Inspect hoses and seals; replace if worn to prevent leaks
• Restore water/power and run a short cycle to check for leaks and proper operation

This water distributor routes wash water to the dishwasher's spray system, restoring proper circulation for thorough cleaning. It's a direct-replacement plumbing component used in compatible Bosch dishwasher models. What it does

• Directs incoming water to the spray arms and wash assembly for even distribution
• Helps restore normal spray pressure and coverage when the original distributor is damaged or clogged
• Works as the plumbing interface between the inlet/valve and internal wash components

• One water distributor

• Disconnect power and shut off the water supply before beginning service
• Handle plastic ports and mounting tabs carefully to avoid cracking; replace any worn seals or gaskets encountered
• Reassemble panels and test a short cycle to ensure proper water flow and no leaks

This small insert is a precision-fit piece that helps secure and align a mating component so it fits and functions properly. Replacing a worn or missing insert restores a solid connection and dependable operation. What it does:

• Provides a snug mounting/locating point for the related part
• Helps prevent looseness, rattling, or misalignment
• Restores proper fit after cracking, wear, or loss
• Common signs include a cracked or missing insert and parts that no longer stay in place

• 1 insert

• Disconnect power (and water supply, if applicable) before servicing
• Compare the new insert to your original to match and orientation
• Remove any broken fragments and clean the area before installation
• Press or snap into place carefully; do not force or overtighten any fasteners

This inlet seal is a small rubber gasket that creates a watertight connection at the dishwasher's water inlet. Replacing a worn seal helps stop leaks and ensures the inlet valve can fill the appliance properly. What it does:

• Seals the water inlet connection to prevent drips or steady leaks underneath the dishwasher
• Maintains a tight seal at the inlet valve so the fill cycle can operate normally
• Commonly replaced when there is visible wear, cracking, or persistent water on the floor
• Helps avoid water damage and the nuisance of repeated drainage or fill errors tied to leaking

• One inlet seal

• Turn off the water supply and disconnect power before servicing
• Remove the inlet valve or access panel as needed to reach the seal; replace with the old seal removed
• Make sure the new seal is seated evenly and the mating surfaces are clean before reassembly

This replacement rail restores smooth, supported movement of a dishwasher rack so loading and unloading work as intended. It replaces a worn, cracked, or bent rail to stop sagging and improve rack alignment. What it does:

• Guides the dishwasher rack along its track for consistent in-and-out motion
• Supports rack weight to prevent tipping or sagging when extended
• Replaces damaged, cracked, or worn rails that cause noisy or jerky operation
• Helps restore proper rack alignment and engagement with the rollers

• Disconnect power and turn off water supply before beginning any repair.
• Remove the affected rack to access and replace the rail; keep small clips or fasteners for reassembly.
• Inspect rack rollers and mounting clips; replace any damaged components for best performance.

This bottom case is the dishwasher base assembly that protects internal components and helps contain leaks, keeping the wash system stable and secure. It's a direct-fit replacement that restores the appliance's lower enclosure. What it does

• Forms the appliance's lower enclosure to shield the pump, motor and wiring from debris
• Helps direct and contain water in the event of minor leaks to protect surrounding components
• Provides mounting surfaces for lower hardware and supports correct alignment of internal parts
• Can reduce rattles or vibration caused by a damaged or cracked lower shell

• One bottom case

• Disconnect power and water supply before beginning any repair
• Handle the part carefully to avoid damaging edges, clips or mounting tabs
• Keep fasteners and any hardware from the original unit; verify fit and alignment before tightening
• If you see water or corrosion, dry and inspect surrounding components for damage before reassembly

This replacement door switch completes the appliance's door-sensing circuit so the unit only runs when the door is closed. It restores proper door-detection and helps the appliance start and stop reliably. What it does

• Detects door open/closed state and completes the electrical circuit when closed
• Prevents the appliance from running with the door open
• Can resolve symptoms like controls not responding, cycle not starting, or the unit stopping unexpectedly when the door is closed
• Works as the direct electrical interface between the door/latch and the control system

• One switch

• Disconnect power before servicing to avoid electrical shock
• Access may require removing the control panel or door trim depending on model
• Handle wiring and connectors carefully; match wire locations before removal

A replacement trim strip that restores the appliance's finished edge and helps stop rubbing or catching along doors and panels. Replaces a worn, bent, or missing trim piece to improve appearance and panel fit. What it does:

• Covers and protects a panel edge or seam to prevent rubbing and cosmetic damage
• Reduces rattling or catching caused by a missing or damaged trim piece
• Restores a smooth finished look to doors, drawers, or control panels
• Works as the OEM-specified replacement strip for compatible appliance panels

• One replacement trim strip

• Disconnect power to the appliance and remove panels per the manufacturer's service instructions before installing
• Trim may snap, slide, or clip into place; avoid forcing parts to prevent damage
• Use proper tools and protect adjacent surfaces during removal/installation

A replacement cutlery basket that holds forks, knives and spoons securely in your dishwasher lower rack to keep small items organized and prevent movement during wash cycles. Restores proper utensil separation for better cleaning. What it does:

• Provides divided compartments to keep silverware separated and upright
• Prevents small items from falling to the bottom of the tub or blocking the spray arm
• Helps maintain consistent water flow around utensils for improved wash performance
• Fits into the lower rack to organize and contain loose cutlery during cycles

• Drops into the dishwasher lower rack—no tools required for standard installs
• Ensure basket seats securely and does not obstruct rack fold-down tines or spray arms
• Remove power or follow appliance manufacturer safety guidance before performing any checks
• Inspect for cracks or broken clips before reuse; replace if damaged