Sge53u56uc/D5 Parts

A replacement trim strip that restores the appliance's finished edge and helps stop rubbing or catching along doors and panels. Replaces a worn, bent, or missing trim piece to improve appearance and panel fit. What it does:

• Covers and protects a panel edge or seam to prevent rubbing and cosmetic damage
• Reduces rattling or catching caused by a missing or damaged trim piece
• Restores a smooth finished look to doors, drawers, or control panels
• Works as the OEM-specified replacement strip for compatible appliance panels

• One replacement trim strip

• Disconnect power to the appliance and remove panels per the manufacturer's service instructions before installing
• Trim may snap, slide, or clip into place; avoid forcing parts to prevent damage
• Use proper tools and protect adjacent surfaces during removal/installation

A replacement cutlery basket that holds forks, knives and spoons securely in your dishwasher lower rack to keep small items organized and prevent movement during wash cycles. Restores proper utensil separation for better cleaning. What it does:

• Provides divided compartments to keep silverware separated and upright
• Prevents small items from falling to the bottom of the tub or blocking the spray arm
• Helps maintain consistent water flow around utensils for improved wash performance
• Fits into the lower rack to organize and contain loose cutlery during cycles

• Drops into the dishwasher lower rack—no tools required for standard installs
• Ensure basket seats securely and does not obstruct rack fold-down tines or spray arms
• Remove power or follow appliance manufacturer safety guidance before performing any checks
• Inspect for cracks or broken clips before reuse; replace if damaged

A replacement door hinge that restores smooth, stable door movement and proper alignment. Designed to replace the factory hinge so the appliance door opens, closes and stays aligned as intended. What it does:

• Supports and pivots the appliance door for normal opening and closing.
• Keeps the door aligned to prevent rubbing, gaps, or uneven sealing.
• Helps eliminate sagging or misaligned doors that make closing difficult.
• Works with original mounting points to maintain correct door motion.

• Use basic hand tools; for model-specific instructions.
• Disconnect power and/or gas and empty the appliance as required before servicing.
• Handle glass or insulated doors with care—use an assistant for heavy or awkward doors.

This electronic control module governs dishwasher wash programs and timing, restoring proper cycle selection and operation when the original control fails. It replaces a faulty program board to help the appliance run selected cycles correctly. What it does:

• Controls wash cycle selection, timing and sequence for dishwasher programs
• Sends signals to valves, pumps and heaters to coordinate operation
• Can stop program advancement or cause error codes when failing
• Common symptom: dishwasher won't start, displays errors, or won't complete cycles

• One control module (programme) as pictured

• Disconnect power to the appliance before starting; verify power is off with a meter
• Handle the board carefully to avoid ESD damage; do not bend contacts or connectors
• Reinstall all connectors and mounting hardware exactly as removed; secure wiring away from moving parts

Replacement lid that restores the cover for the appliance component, protecting internal parts from debris and moisture and returning the unit to its original appearance and function. Fits the OEM assembly identified by the manufacturer part number. What it does:

• Covers and protects the underlying component or reservoir from dust, spills, and contaminants
• Helps maintain proper sealing and prevents leaks or moisture intrusion when intact
• Restores cosmetic appearance when original lid is cracked, warped, or missing
• Prevents loose items from entering internal compartments or mechanisms

• Disconnect power and water before beginning any disassembly
• Handle carefully to avoid scratching or chipping; some lids are plastic or glass
• Remove retaining clips or screws as needed; align tabs and snap or fasten into place without forcing
• Test operation and check for proper fit and sealing after installation

The Detergent Dispenser is an OEM replacement part for Bosch dishwashers. It is located inside the dishwasher and is responsible for properly delivering detergent at the appropriate time during wash cycles. The detergent dispenser has a compartment that holds detergent tablets or pods, and a mechanism that releases the correct amount to efficiently clean dishes.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad detergent dispenser include:

• Detergent not dispensing or residue left in the dispenser
• Dirty dishes due to insufficient or improper detergent delivery
• Corrosion or buildup inside the dispenser area
• Dispenser door or cover cracked or damaged

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Handle is an OEM part for Bosch dishwashers. It provides the surface for securely grasping and maneuvering the dishwasher door during opening and closing. 

Causes of a bad handle can include wear and tear from ongoing grasping motions. Repeated lifting and adjusting of the door places stress on handle components over time.

Symptoms of a bad handle include:

• Looseness, wobbling or detachment from the door assembly
• Sharp edges, cracks or splits compromising a firm grip
• Reduced ability to precisely guide the door into position

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or over-tightening during installation, leading to stripping or damage.  

Symptoms of a bad Thread Bolt include:

• Leaks around the water inlet area Loose or rattling water inlet valve 
• Difficulty in accessing or removing the valve assembly 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This spindle is the rotating shaft that transfers motion between the motor/gearbox and the appliance's moving components, restoring proper rotation and alignment for reliable operation. Fits as a direct replacement when the original spindle is worn or broken. What it does:

• Connects and transmits rotational force from the drive assembly to the appliance's moving part
• Maintains alignment and smooth rotation for consistent performance
• Can stop wobble or intermittent movement caused by a bent or damaged shaft
• Helps restore normal operation if the original spindle is cracked, worn, or seized

• Intended for users comfortable with appliance repair; unplug appliance and shut off water before starting
• Inspect related seals, bearings, and mounting hardware; replace if damaged
• Use correct tools and torque per manufacturer guidance; avoid forcing components to prevent damage