Sge6315uc/73 Parts

This genuine water inlet routes household water into the appliance's fill system, helping ensure consistent water delivery and a secure, leak-resistant connection. Replacing a worn or damaged inlet restores proper filling performance and helps prevent leaks at the entry point. What it does:

• Connects the supply line to the unit and directs water into the fill system
• Helps maintain a watertight seal at the water entry connection
• Supports proper fill by working with the appliance's control and fill components
• Common symptoms: no or slow fill, dripping/leak at the inlet connection, visible cracks or mineral buildup on the fitting

• 1 water inlet

• Disconnect power and turn off the water supply before servicing
• Place a towel or pan to catch residual water when removing the old part
• Note the orientation; reinstall existing seals/clips in their original positions if applicable
• Tighten fittings snugly without overtightening; restore water and check for leaks before use

This seal creates a tight, leak-proof interface between mating components inside your appliance. Replacing a worn seal helps stop drips and protects nearby parts for reliable, leak-free operation.

• Forms a watertight barrier between connected parts
• Replaces cracked, flattened, or deformed sealing material that can leak
• Helps address puddling, dampness, or seepage around the unit
• Maintains proper performance and helps prevent water damage to surrounding components

• Disconnect power and shut off the water supply before servicing
• Access the sealed joint and note the original orientation and seating depth
• Clean mating surfaces; do not use sealants unless specified by the manufacturer
• Seat the new seal evenly; lightly lubricate with a water-safe lubricant and run a test cycle to check for leaks

This repair set renews the hinge pivot components so the door opens smoothly and closes squarely. Replacing the worn hardware helps maintain proper alignment and a tight gasket seal for consistent performance. What it does:

• Replaces worn hinge pin/bushing hardware to restore door support
• Helps fix a door that sags, scrapes, or won't close flush
• Can reduce clicking, squeaking, or grinding at the hinge
• Helps the door seal make full contact to prevent warm air leaks

• 1 repair set

• Disconnect power; if applicable, turn off the water supply
• Remove items from the door; support the door and lift it off the hinge
• Install the new hinge hardware in the original orientation
• Reinstall and align the door; verify gasket seal and adjust leveling if needed

This genuine replacement bearing supports the washer drum for smooth, stable rotation and helps reduce noise and vibration caused by worn or damaged bearings. Restores proper drum alignment for quieter operation. What it does:

• Supports the inner drum so it spins smoothly and stays aligned
• Reduces grinding, rumbling, squeaking or knocking noises from the drum
• Helps prevent excessive drum wobble that can damage seals or the tub
• Used when worn bearings cause rough rotation, metal-on-metal noise, or visible drum play

• Disconnect power (and water if applicable) before starting any repair
• Replacing this bearing typically requires partial disassembly of the washer/drum assembly and specialty tools
• Inspect shaft/hub, seals, and surrounding components for wear and replace if damaged

The Levelling Foot is an OEM replacement part designed specifically for Bosch dishwashers. It works to properly position and stabilize the appliance for balanced and smooth operation. Causes of a bad levelling leg/foot can include general wear and tear over time. 

Symptoms of a bad levelling foot include: 

• An unbalanced or unstable dishwasher during use
• Rocking or shifting of the unit on an uneven surface 

This genuine OEM Bosch part restores proper alignment and support of the dishwasher to ensure optimal performance and noise reduction. This Bosch part can also be used on Thermador and Gaggenau appliances.

This factory bearing supports a rotating component inside your appliance, reducing friction so it turns smoothly and quietly. Replacing a worn bearing helps restore proper motion and can reduce noise and wear in the related assembly. What it does:

• Provides low-friction support for a rotating shaft or arm
• Helps maintain smooth, aligned rotation
• Common wear signs: grinding/squealing noises, wobble or excess play, rough/sticking rotation, or visible damage
• A failed bearing can accelerate wear on connected parts

• 1 bearing

• Disconnect power; shut off water or gas before servicing
• Note orientation and any spacers/clips before removal; transfer in the same order
• Inspect mating seals, clips, or shafts and replace if worn
• Do not lubricate unless specified by the manufacturer; keep contact surfaces clean

This replacement foot is the leveling support at the base of your appliance. It helps set the height and keep the unit stable and level, reducing wobble, vibration, and noise for smoother, quieter operation.

• Supports the appliance base and provides solid floor contact
• Allows height/leveling adjustment as designed by the unit
• Helps correct rocking, vibration, walking, or door misalignment caused by an unlevel appliance
• Replace if the foot is cracked, missing, worn, or stripped and won't hold adjustment

• Disconnect power; shut off water supply if applicable
• Protect flooring and have a helper steady or move the unit
• Remove the damaged foot; install the new foot per the mounting style (threaded or push-in)
• Adjust height to level the cabinet and stability at all corners

This micro filter is a fine-mesh replacement filter that traps food particles and debris in the dishwasher sump, helping maintain wash performance and protect the pump and drain from clogs. What it does:

• Captures small food particles to prevent recirculation and reduce spotting
• Helps keep the dishwasher drain and pump from clogging
• Supports consistent water flow for better cleaning results
• Can reduce odors caused by trapped debris in the filter area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack to access the sump area; follow your owner's manual for filter removal
• Ensure the filter is properly seated and locked before running a cycle
• Clean surrounding areas and inspect for additional debris while replacing the filter

The Fine Filter is an OEM part for Bosch dishwashers. It is designed to trap small food particles and debris before they can clog other areas of the dishwasher.

The fine filter is positioned inside the dishwasher tub and spray arms to act as a preliminary filter. It helps keep the wash and rinse zones free of obstructions to allow for the best cleaning performance.

Causes of a faulty fine filter are normal product usage over time, accumulation of stubborn food or mineral deposits, and occasional damage from sharp dish edges

Symptoms of a bad fine filter include:
Buildup of muck or grime that cannot be cleaned
Torn or damaged mesh that no longer traps particles
Improper drainage or water not circulating as it should
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Dishwasher Hinge Lever is an OEM replacement part for Bosch dishwashers. This hinge lever is crucial for the operation of the dishwasher door, supporting smooth movement as it opens and closes. It works alongside the door springs to provide balanced tension, ensuring that the door stays securely in place when opened or closed. 

Over time, hinge levers may wear out due to regular use, strain from overloading the door, or corrosion from prolonged exposure to moisture. A damaged hinge lever can disrupt the door’s movement, leading to issues with opening, closing, or improper sealing of the dishwasher door.

Symptoms of a bad Dishwasher Hinge Lever include:

• Difficulty opening or closing the dishwasher door
• The door dropping open without resistance
• A loose or sagging door that won’t stay securely in place
• Unusual noises when moving the door 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Replacement hood canopy that restores the vent cover and exterior appearance of your range hood. Installs in place of a dented, rusted, or damaged canopy to keep ventilation components protected and maintain a finished look. What it does:

• Covers and protects internal blower, controls and filters from grease, dust and damage
• Directs exhaust airflow through the hood; bent or crushed can disrupt ventilation
• Restores exterior appearance—visible dents, rust or corrosion are common signs it needs replacement
• Provides the proper mounting surface for filters and related hood components

• Disconnect power to the appliance before starting any repair
• Retain existing mounting hardware and seals unless new hardware is specifically listed as included

Replacement door hinge that restores proper door alignment and smooth opening/closing for compatible Bosch appliances. Simple, direct support for the door pivot to reduce sagging, uneven closing, and noisy operation. What it does:

• Supports the appliance door pivot and maintains correct door alignment during use.
• Helps stop door sagging, uneven gaps, and doors that don't close or latch reliably.
• Restores smooth opening and closing and reduces hinge-related noise.
• Works as the mechanical pivot/connection between the door and cabinet frame.

• Turn off power and disconnect the appliance (and water supply if applicable) before starting any repair.
• Support the door while removing/installing the hinge to prevent damage or injury.
• Use the original mounting hardware or manufacturer-recommended fasteners; tighten securely but avoid overtightening.
• After installation, check door alignment and operation; adjust as needed per manufacturer instructions.

Spring-style hose clamp that secures flexible water hoses to fittings on select appliances, helping maintain a leak-tight connection at hose joints. Keeps hoses seated to reduce leaks and ensure reliable water flow. What it does:

• Holds flexible inlet, drain, or circulation hoses tightly on barbed fittings and nipples.
• Prevents leaks and water loss at hose connections by maintaining steady clamp pressure.
• Common signs it needs replacement: dripping or pooling near hose connections, a loose or wobbly hose, or visible clamp corrosion or deformation.
• Small, inexpensive part that restores a secure hose connection when the original clamp has failed.

• Always disconnect power and shut off the water supply before servicing appliance plumbing.
• For spring-style clamps, use pliers to open the clamp, position it over the hose, and release slowly so it seats properly; ensure the hose is fully pushed onto the fitting.
• Inspect the hose and fitting for damage; replace the hose if cracked or excessively worn before installing a new clamp.
• Wear eye protection when compressing or releasing spring clamps to avoid injury from sudden release.

This genuine replacement seal provides a watertight connection where components join, helping prevent leaks and maintain normal appliance performance. Use when an old or damaged seal allows water to escape or pooling occurs. What it does:

• Creates a tight seal between mating parts to stop water leaks
• Restores proper sealing at appliance joints or hose connections
• Helps prevent water damage and reduces the chance of intermittent leaks
• Commonly replaced when a seal is cracked, flattened, or missing

• Turn off power and water supply before replacing the seal.
• Clean and dry mating surfaces thoroughly before installing the new seal.
• Ensure correct orientation and proper seating so the seal sits evenly in the groove.
• Inspect adjoining parts for wear; replace damaged components to ensure a proper seal.

The Adapter is an OEM part for Bosch dishwashers. It is used to connect the dishwasher water inlet hose to the internal water supply component. Proper sealing and connections are critical for leak-free dishwasher operation.

Causes of a bad hose adapter can include mineral buildup interfering with the seal, cracks developing from repeated heating and cooling cycles, or accidental damage during hose handling.

Symptoms of a bad hose adapter include:

• Water leaks at the hose connection point
• Mineral deposits or residue left around the area
• Reduced water pressure or flow to internal components
• Inability to establish a tight seal when connecting the hose

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

A replacement base panel that covers and protects the appliance's lower front area while restoring a finished appearance. Durable metal construction keeps internal components shielded from debris and accidental contact. What it does:

• Covers the appliance base to protect wiring, insulation, and components from dust and debris.
• Helps maintain proper airflow under the appliance and keeps internal areas concealed.
• Restores the unit's finished appearance when the original panel is dented, bent, or missing.
• Prevents accidental contact with lower components and reduces exposure to pests or spills.

• One base panel

• Disconnect power to the appliance before beginning work; follow all safety precautions.
• Remove the kickplate or access panel and any mounting screws or clips to swap panels.
• Handle edges carefully; replacement panels may have sharp metal edges.