Sge6315uc/73 Parts

This sealing is a molded rubber gasket that provides a watertight barrier where two appliance components meet, helping prevent leaks and water damage. It's a direct-fit replacement when the original seal is cracked or worn. What it does:

• Creates a watertight seal to help prevent leaks during operation
• Restores proper sealing where the original gasket has become brittle, torn, or flattened
• Helps maintain appliance performance by keeping water inside the wash/tub area
• Reduces risk of water damage to cabinetry or floors from failing seals

• One sealing

• Disconnect power and water supply before beginning any repair
• Verify mating surfaces are clean and dry; remove any old sealant or debris for a proper fit
• Inspect the replacement for damage before installing and align evenly to avoid pinching

The Base Panel is an OEM replacement part for Bosch dishwashers. It serves as the protective front cover for the dishwasher's base, hiding the internal parts and providing a finished look to your appliance.

A bad base panel can occur due to accidental damage, wear and tear, or discoloration over time. Signs of a faulty base panel include cracks, dents, or a worn-out appearance.

Symptoms of a bad base panel include:

• Visible cracks, dents, or damage 
• A worn-out or faded appearance
• Difficulty in cleaning the panel

Restore your Bosch dishwasher by replacing the damaged or worn-out base panel with this genuine OEM part. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This fixing kit provides the mounting hardware needed to secure or reposition appliance panels and components, restoring proper fit and reducing rattles or movement. It's a compact set meant for specific Bosch appliance repair tasks. What it does:

• Provides the screws, clips, and/or brackets used to mount panels or components securely
• Helps stop panel vibration, rattling, or misalignment caused by loose fasteners
• Restores proper fit for access panels, trim pieces, or internal brackets
• Useful when replacing panels or refurbishing assembly points that rely on factory fasteners

• Installation requires basic hand tools; follow for correct fastener locations
• Turn off and unplug the appliance before starting any repair to avoid electric shock
• Handle sheet metal and sharp edges with care; wear gloves and eye protection as needed

This spray arm is the rotating water distributor that delivers pressurized spray to clean dishes in compatible Bosch dishwashers. Replacing a damaged or clogged spray arm restores proper water coverage and cleaning performance. What it does:

• Spins and disperses wash water across the lower/middle rack to remove food and soils
• Helps maintain even water distribution for consistent cleaning results
• Can reduce spotting and missed-soil areas when functioning correctly
• Common symptom: noisy operation, poor spray coverage, or visible cracks/blocked jets

• One spray arm

• Turn off power and water supply before starting any repair
• Inspect mounting hub and seals; replace damaged clips or gaskets as needed
• Remove items from dishwasher racks for easier access; follow OEM instructions for removal and reinstallation
• If jets are clogged, clean before reinstalling to prevent reoccurrence

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or over-tightening during installation, leading to stripping or damage.  

Symptoms of a bad Thread Bolt include:

• Leaks around the water inlet area Loose or rattling water inlet valve 
• Difficulty in accessing or removing the valve assembly 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This operating module is the dishwasher's electronic control board that runs the user interface and manages wash cycles, displays, and touch/selection inputs for reliable cleaning performance. What it does:

• Controls cycle selection, start/pause, and display indicators
• Communicates with sensors and valves to sequence wash, drain, and dry functions
• Restores responsive touch/buttons and correct cycle reporting when a failed control causes no power or unresponsive controls
• Helps resolve intermittent errors, blank displays, or failure to start tied to the main user/control electronics

• Disconnect power at the breaker before inspecting or replacing the module
• Access typically requires removing the control panel; keep screws and panels organized
• Handle the board by edges and avoid static discharge; do not touch electronic contacts

This water softener cartridge helps reduce hard-water minerals in dishwasher cycles to limit spotting and buildup for clearer glassware and cleaner dishes. Fits into the dishwasher's water-treatment area to help maintain wash performance. What it does:

• Uses ion-exchange media to reduce hardness that causes spotting and cloudy glass
• Helps prevent mineral deposits on heating elements and interior surfaces
• Improves detergent effectiveness for better cleaning and rinsing
• Common symptom: persistent spots or white film on dishes and glasses

• High-level replacement: disconnect power and water supply before servicing
• Access requires removing the dishwasher's outer tub/top panels per service manual
• Handle cartridge and internal parts carefully to avoid damaging seals or gaskets

This temperature sensor (thermistor) measures appliance temperature and sends a signal to the control board so the unit can maintain proper cooling cycles. Replaces a failed or intermittent sensor for more reliable temperature control. What it does:

• Detects internal temperature and provides a changing resistance signal to the control board
• Helps the control board regulate compressor and fan operation for consistent cooling
• Commonly linked to symptoms like incorrect temperatures, frequent cycling, or related error codes
• Works as a direct-replacement sensing element

• One temperature sensor (thermistor) as pictured

• Disconnect power before servicing to avoid shock or damage
• Handle the sensor and wiring gently; avoid kinking or pinching the harness
• Access may require removing interior panels or covers; keep mounting hardware for reinstallation
• Test with a multimeter or follow OEM service instructions before replacement

This water inlet valve controls incoming water flow to the appliance, ensuring proper fill during cycles and helping prevent overfilling. Replaces a worn or leaking valve to restore normal water delivery and cycle performance. What it does:

• Opens and closes to allow water into the appliance when a cycle requests fill.
• Prevents water flow when the machine is idle, helping avoid leaks or flooding.
• Commonly fails when leaking, not filling, or filling continuously.
• Electromechanical valve operated by the appliance's control board or timer.

• One water inlet valve

• Disconnect power and turn off the water supply before starting any work.
• Verify valve orientation and hose connections match the appliance before finalizing installation.
• Inspect inlet hoses and clamps for damage; replace if brittle or cracked.

This retaining nut secures threaded connections on compatible Bosch appliances to keep components tight and stable during operation. A small replacement that restores proper fastening and prevents parts from loosening. What it does:

• Fastens and secures mating threaded components to maintain mechanical stability
• Prevents vibration-induced loosening of attached parts
• Helps maintain proper alignment of secured components during use
• Can stop intermittent movement or rattling caused by a missing or damaged nut

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Verify correct nut location and thread engagement before tightening; do not force threads
• Tighten to snug fit—avoid overtightening which can strip threads or damage components

This replacement rail restores smooth rack movement and proper alignment in compatible dishwashers. It helps support the rack and keep rollers on track so the rack slides in and out without binding. What it does

• Supports and guides a dishwasher rack so it rolls smoothly along its track
• Helps prevent the rack from slipping off or catching while opening or closing
• Can reduce grinding or scraping noises caused by a damaged or bent rail
• Restores proper rack alignment for reliable loading and unloading

• One rail

• Turn off power to the appliance before beginning any service
• Remove the affected rack and rollers as needed to access and replace the rail
• Inspect rollers and mounting clips; replace any worn hardware to ensure proper fit