Sgv55m43eu/10 Parts

The Prolongation is an OEM replacement part for Bosch dishwashers that connects the dishwasher to the water supply, allowing for the proper filling of water during the wash cycles. It ensures a secure and leak-free connection between your dishwasher and the water source. It is designed to withstand the water pressure and temperature variations, providing a reliable and consistent water supply for your dishwasher.

A bad prolongation can occur due to wear and tear, damage, or improper installation. Signs of a faulty fill hose include leaks, cracks, or a decrease in water flow.

Symptoms of a bad prolongation include:

• Water leaks around the connection points  
• Reduced water flow or inadequate water supply 
• Visible cracks or damage to the fill hose  

Replace your worn-out or damaged prolongation with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This front base sound insulation is a factory-style cotton pad that helps reduce dishwasher operating noise and provides thermal cushioning under the tub. It restores the appliance's original sound-dampening and insulation where worn or missing. What it does:

• Dampens vibration and reduces motor/tub noise heard during cycles
• Provides a thermal buffer under the dishwasher base to help maintain stable temperatures
• Helps prevent rattles and improves overall quiet operation when installed correctly
• Restores OEM-fit insulation performance after damage, wear, or removal

• One front base sound insulation pad (cotton), as shown

• Disconnect power and water supply before accessing the dishwasher base
• Remove the lower access panel and mounting hardware to reach the insulation area
• Install in the original location; use the same fasteners or adhesive method specified by the manufacturer

This is the front corner block. For rear corner block use 00263093.

This retaining nut secures threaded connections on compatible Bosch appliances to keep components tight and stable during operation. A small replacement that restores proper fastening and prevents parts from loosening. What it does:

• Fastens and secures mating threaded components to maintain mechanical stability
• Prevents vibration-induced loosening of attached parts
• Helps maintain proper alignment of secured components during use
• Can stop intermittent movement or rattling caused by a missing or damaged nut

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Verify correct nut location and thread engagement before tightening; do not force threads
• Tighten to snug fit—avoid overtightening which can strip threads or damage components

This replacement rail restores smooth rack movement and proper alignment in compatible dishwashers. It helps support the rack and keep rollers on track so the rack slides in and out without binding. What it does

• Supports and guides a dishwasher rack so it rolls smoothly along its track
• Helps prevent the rack from slipping off or catching while opening or closing
• Can reduce grinding or scraping noises caused by a damaged or bent rail
• Restores proper rack alignment for reliable loading and unloading

• One rail

• Turn off power to the appliance before beginning any service
• Remove the affected rack and rollers as needed to access and replace the rail
• Inspect rollers and mounting clips; replace any worn hardware to ensure proper fit

This genuine bearing supports smooth, low-friction rotation of a moving component inside your appliance. Replacing a worn bearing restores quiet, consistent operation and helps protect the shaft and housing from accelerated wear.

• Provides radial support and alignment for a rotating shaft or arm
• Reduces friction to improve efficiency and minimize noise
• Helps prevent wobble and uneven wear on mating parts
• Typical signs of wear: grinding/squealing sounds, rough or seized rotation, excessive play

• Disconnect power and water supply and allow hot components to cool
• Access the assembly; note the original bearing's orientation and depth
• Inspect the shaft and housing; replace if grooved, bent, or heat-damaged
• Press the new bearing in squarely; avoid striking the inner/outer race and verify free rotation before reassembly

This is the appliance's main power on/off switch. It restores reliable control of electrical power to the unit so you can turn it on and off consistently.

• Controls AC power to the appliance's user interface and electronics
• Worn or stuck switch can cause no power, intermittent power, or inability to shut off
• Spongy or loose button feel may indicate internal switch failure

• Disconnect power before service to avoid electrical shock
• Access typically requires removing the control panel or console
• Note wire positions or take a photo before disconnecting
• Do not force tabs; transfer any clips or boots from the old switch if present

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This regeneration valve directs brine through your dishwasher's built-in water softener during recharge cycles, helping prevent hard-water film and spotting. Replacing a faulty valve restores consistent softening and better cleaning results.

• Opens to route salt brine through the ion-exchange resin during regeneration
• Helps maintain proper water hardness feeding the wash system
• Failure can lead to white film/spots, cloudy glassware, mineral buildup, and reduced cleaning
• Also contributes to inconsistent softener performance over time

• Disconnect power and turn off the water supply before servicing
• Access location varies by model; note hose routing and valve orientation during removal
• Inspect hoses and seals; replace if worn to prevent leaks
• Restore water/power and run a short cycle to check for leaks and proper operation