Sgv68u53uc/D9 Parts

This repair set renews the hinge pivot components so the door opens smoothly and closes squarely. Replacing the worn hardware helps maintain proper alignment and a tight gasket seal for consistent performance. What it does:

• Replaces worn hinge pin/bushing hardware to restore door support
• Helps fix a door that sags, scrapes, or won't close flush
• Can reduce clicking, squeaking, or grinding at the hinge
• Helps the door seal make full contact to prevent warm air leaks

• 1 repair set

• Disconnect power; if applicable, turn off the water supply
• Remove items from the door; support the door and lift it off the hinge
• Install the new hinge hardware in the original orientation
• Reinstall and align the door; verify gasket seal and adjust leveling if needed

This factory screw secures select Bosch/BSH appliance components. Use it to replace a missing or damaged fastener so panels, brackets, or trim stay tight and rattle-free during operation.

• Tightens and holds appliance parts such as panels, brackets, or trim in place
• Helps correct issues like loose or vibrating panels caused by a missing/stripped screw
• Maintains proper fitment after service or disassembly
• Torx T20 drive head helps resist cam-out during tightening

• Unplug power and shut off any water supply before servicing
• Use a T20 Torx driver; hand-start to avoid cross-threading
• Do not overtighten—snug to manufacturer torque guidance if available
• Replace any additional missing or damaged fasteners for even clamping

The Levelling Foot is an OEM replacement part designed specifically for Bosch dishwashers. It works to properly position and stabilize the appliance for balanced and smooth operation. Causes of a bad levelling leg/foot can include general wear and tear over time. 

Symptoms of a bad levelling foot include: 

• An unbalanced or unstable dishwasher during use
• Rocking or shifting of the unit on an uneven surface 

This genuine OEM Bosch part restores proper alignment and support of the dishwasher to ensure optimal performance and noise reduction. This Bosch part can also be used on Thermador and Gaggenau appliances.

The Indicator Light is an OEM part for Bosch dishwashers. It serves as a visual cue, providing important status updates and notifications related to the dishwasher's operation.

Causes of a malfunctioning Indicator Light can stem from issues with the control board or wiring harness that powers the light, or the light itself burning out due to age or electrical surges.

Symptoms of a bad Indicator Light include:

• The light not illuminating at all, even when it should be on
• Flickering or dimming of the light during operation
• The wrong indicator light turning on or staying on inappropriately

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement foot is the leveling support at the base of your appliance. It helps set the height and keep the unit stable and level, reducing wobble, vibration, and noise for smoother, quieter operation.

• Supports the appliance base and provides solid floor contact
• Allows height/leveling adjustment as designed by the unit
• Helps correct rocking, vibration, walking, or door misalignment caused by an unlevel appliance
• Replace if the foot is cracked, missing, worn, or stripped and won't hold adjustment

• Disconnect power; shut off water supply if applicable
• Protect flooring and have a helper steady or move the unit
• Remove the damaged foot; install the new foot per the mounting style (threaded or push-in)
• Adjust height to level the cabinet and stability at all corners

This micro filter is a fine-mesh replacement filter that traps food particles and debris in the dishwasher sump, helping maintain wash performance and protect the pump and drain from clogs. What it does:

• Captures small food particles to prevent recirculation and reduce spotting
• Helps keep the dishwasher drain and pump from clogging
• Supports consistent water flow for better cleaning results
• Can reduce odors caused by trapped debris in the filter area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack to access the sump area; follow your owner's manual for filter removal
• Ensure the filter is properly seated and locked before running a cycle
• Clean surrounding areas and inspect for additional debris while replacing the filter

The Fine Filter is an OEM part for Bosch dishwashers. It is designed to trap small food particles and debris before they can clog other areas of the dishwasher.

The fine filter is positioned inside the dishwasher tub and spray arms to act as a preliminary filter. It helps keep the wash and rinse zones free of obstructions to allow for the best cleaning performance.

Causes of a faulty fine filter are normal product usage over time, accumulation of stubborn food or mineral deposits, and occasional damage from sharp dish edges

Symptoms of a bad fine filter include:
Buildup of muck or grime that cannot be cleaned
Torn or damaged mesh that no longer traps particles
Improper drainage or water not circulating as it should
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Dishwasher Hinge Lever is an OEM replacement part for Bosch dishwashers. This hinge lever is crucial for the operation of the dishwasher door, supporting smooth movement as it opens and closes. It works alongside the door springs to provide balanced tension, ensuring that the door stays securely in place when opened or closed. 

Over time, hinge levers may wear out due to regular use, strain from overloading the door, or corrosion from prolonged exposure to moisture. A damaged hinge lever can disrupt the door’s movement, leading to issues with opening, closing, or improper sealing of the dishwasher door.

Symptoms of a bad Dishwasher Hinge Lever include:

• Difficulty opening or closing the dishwasher door
• The door dropping open without resistance
• A loose or sagging door that won’t stay securely in place
• Unusual noises when moving the door 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Replacement push-button for the appliance control panel that restores tactile action and appearance. Use when the original button is cracked, worn, stuck, or missing to recover normal button operation. What it does

• Acts as the visible actuator on the control panel, engaging the underlying switch or membrane.
• Restores button feel and appearance so commands register correctly when the original is damaged.
• Useful when a button is cracked, chipped, stuck, or missing and won't return or press reliably.
• Does not include internal switch or electronics unless otherwise specified on the product page.

• Always unplug the appliance or disconnect power at the breaker before attempting any repair.
• Remove the control console or trim to access the button; keep track of small screws and clips.
• Gently disengage plastic tabs or clips to remove the old button; avoid forcing parts to prevent breaking surrounding trim.
• Test button function before reassembling the console; if the underlying switch still fails, further disassembly or a switch replacement may be required.

Replacement door hinge that restores proper door alignment and smooth opening/closing for compatible Bosch appliances. Simple, direct support for the door pivot to reduce sagging, uneven closing, and noisy operation. What it does:

• Supports the appliance door pivot and maintains correct door alignment during use.
• Helps stop door sagging, uneven gaps, and doors that don't close or latch reliably.
• Restores smooth opening and closing and reduces hinge-related noise.
• Works as the mechanical pivot/connection between the door and cabinet frame.

• Turn off power and disconnect the appliance (and water supply if applicable) before starting any repair.
• Support the door while removing/installing the hinge to prevent damage or injury.
• Use the original mounting hardware or manufacturer-recommended fasteners; tighten securely but avoid overtightening.
• After installation, check door alignment and operation; adjust as needed per manufacturer instructions.

This genuine replacement seal provides a watertight connection where components join, helping prevent leaks and maintain normal appliance performance. Use when an old or damaged seal allows water to escape or pooling occurs. What it does:

• Creates a tight seal between mating parts to stop water leaks
• Restores proper sealing at appliance joints or hose connections
• Helps prevent water damage and reduces the chance of intermittent leaks
• Commonly replaced when a seal is cracked, flattened, or missing

• Turn off power and water supply before replacing the seal.
• Clean and dry mating surfaces thoroughly before installing the new seal.
• Ensure correct orientation and proper seating so the seal sits evenly in the groove.
• Inspect adjoining parts for wear; replace damaged components to ensure a proper seal.

The Aquastop Valve is an OEM part for Bosch dishwashers. This aquastop valve is responsible for regulating the water flow into the dishwasher and preventing any potential leaks or water damage. It features a built-in mechanism that automatically shuts off the water supply in the event of a leak or excessive water pressure.

A bad aquastop valve can occur due to wear and tear, clogs, or electrical malfunctions. Signs of a faulty valve include water leaks during the dishwasher's operation, the dishwasher not filling with water, or error codes related to water supply issues.

Symptoms of a bad aquastop valve include:

• Water leaks from the dishwasher 
• The dishwasher not filling with water 
• Error codes related to water supply issues

Replace your malfunctioning or damaged aquastop valve with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

A replacement base panel that covers and protects the appliance's lower front area while restoring a finished appearance. Durable metal construction keeps internal components shielded from debris and accidental contact. What it does:

• Covers the appliance base to protect wiring, insulation, and components from dust and debris.
• Helps maintain proper airflow under the appliance and keeps internal areas concealed.
• Restores the unit's finished appearance when the original panel is dented, bent, or missing.
• Prevents accidental contact with lower components and reduces exposure to pests or spills.

• One base panel

• Disconnect power to the appliance before beginning work; follow all safety precautions.
• Remove the kickplate or access panel and any mounting screws or clips to swap panels.
• Handle edges carefully; replacement panels may have sharp metal edges.

The Base Panel is an OEM replacement part for Bosch dishwashers. It serves as the protective front cover for the dishwasher's base, hiding the internal parts and providing a finished look to your appliance.

A bad base panel can occur due to accidental damage, wear and tear, or discoloration over time. Signs of a faulty base panel include cracks, dents, or a worn-out appearance.

Symptoms of a bad base panel include:

• Visible cracks, dents, or damage 
• A worn-out or faded appearance
• Difficulty in cleaning the panel

Restore your Bosch dishwasher by replacing the damaged or worn-out base panel with this genuine OEM part. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This sealing is a molded rubber gasket that provides a watertight barrier where two appliance components meet, helping prevent leaks and water damage. It's a direct-fit replacement when the original seal is cracked or worn. What it does:

• Creates a watertight seal to help prevent leaks during operation
• Restores proper sealing where the original gasket has become brittle, torn, or flattened
• Helps maintain appliance performance by keeping water inside the wash/tub area
• Reduces risk of water damage to cabinetry or floors from failing seals

• One sealing

• Disconnect power and water supply before beginning any repair
• Verify mating surfaces are clean and dry; remove any old sealant or debris for a proper fit
• Inspect the replacement for damage before installing and align evenly to avoid pinching