Sgxs365sf Parts

This genuine bearing supports smooth, low-friction rotation of a moving component inside your appliance. Replacing a worn bearing restores quiet, consistent operation and helps protect the shaft and housing from accelerated wear.

• Provides radial support and alignment for a rotating shaft or arm
• Reduces friction to improve efficiency and minimize noise
• Helps prevent wobble and uneven wear on mating parts
• Typical signs of wear: grinding/squealing sounds, rough or seized rotation, excessive play

• Disconnect power and water supply and allow hot components to cool
• Access the assembly; note the original bearing's orientation and depth
• Inspect the shaft and housing; replace if grooved, bent, or heat-damaged
• Press the new bearing in squarely; avoid striking the inner/outer race and verify free rotation before reassembly

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This regeneration valve directs brine through your dishwasher's built-in water softener during recharge cycles, helping prevent hard-water film and spotting. Replacing a faulty valve restores consistent softening and better cleaning results.

• Opens to route salt brine through the ion-exchange resin during regeneration
• Helps maintain proper water hardness feeding the wash system
• Failure can lead to white film/spots, cloudy glassware, mineral buildup, and reduced cleaning
• Also contributes to inconsistent softener performance over time

• Disconnect power and turn off the water supply before servicing
• Access location varies by model; note hose routing and valve orientation during removal
• Inspect hoses and seals; replace if worn to prevent leaks
• Restore water/power and run a short cycle to check for leaks and proper operation

This water distributor routes wash water to the dishwasher's spray system, restoring proper circulation for thorough cleaning. It's a direct-replacement plumbing component used in compatible Bosch dishwasher models. What it does

• Directs incoming water to the spray arms and wash assembly for even distribution
• Helps restore normal spray pressure and coverage when the original distributor is damaged or clogged
• Works as the plumbing interface between the inlet/valve and internal wash components

• One water distributor

• Disconnect power and shut off the water supply before beginning service
• Handle plastic ports and mounting tabs carefully to avoid cracking; replace any worn seals or gaskets encountered
• Reassemble panels and test a short cycle to ensure proper water flow and no leaks

This inlet seal is a small rubber gasket that creates a watertight connection at the dishwasher's water inlet. Replacing a worn seal helps stop leaks and ensures the inlet valve can fill the appliance properly. What it does:

• Seals the water inlet connection to prevent drips or steady leaks underneath the dishwasher
• Maintains a tight seal at the inlet valve so the fill cycle can operate normally
• Commonly replaced when there is visible wear, cracking, or persistent water on the floor
• Helps avoid water damage and the nuisance of repeated drainage or fill errors tied to leaking

• One inlet seal

• Turn off the water supply and disconnect power before servicing
• Remove the inlet valve or access panel as needed to reach the seal; replace with the old seal removed
• Make sure the new seal is seated evenly and the mating surfaces are clean before reassembly

This push button set replaces the worn or damaged control buttons on compatible Bosch appliance control panels, restoring tactile feedback and reliable user input for cycle selection and control functions. What it does:

• Replaces broken, cracked, or missing push buttons that prevent normal panel operation
• Restores proper tactile feel for selecting cycles, options, and other controls
• Helps eliminate buttons that stick, don't depress fully, or fail to register presses
• Improves appearance of the control panel when original buttons are faded or discolored

• Disconnect power to the appliance before beginning any repair to avoid shock or damage
• Typically installs from the front of the control panel; may require removing the outer panel or trim
• Handle buttons gently—do not force; align clips or posts before pressing into place

This replacement rail restores smooth, supported movement of a dishwasher rack so loading and unloading work as intended. It replaces a worn, cracked, or bent rail to stop sagging and improve rack alignment. What it does:

• Guides the dishwasher rack along its track for consistent in-and-out motion
• Supports rack weight to prevent tipping or sagging when extended
• Replaces damaged, cracked, or worn rails that cause noisy or jerky operation
• Helps restore proper rack alignment and engagement with the rollers

• Disconnect power and turn off water supply before beginning any repair.
• Remove the affected rack to access and replace the rail; keep small clips or fasteners for reassembly.
• Inspect rack rollers and mounting clips; replace any damaged components for best performance.

This bottom case is the dishwasher base assembly that protects internal components and helps contain leaks, keeping the wash system stable and secure. It's a direct-fit replacement that restores the appliance's lower enclosure. What it does

• Forms the appliance's lower enclosure to shield the pump, motor and wiring from debris
• Helps direct and contain water in the event of minor leaks to protect surrounding components
• Provides mounting surfaces for lower hardware and supports correct alignment of internal parts
• Can reduce rattles or vibration caused by a damaged or cracked lower shell

• One bottom case

• Disconnect power and water supply before beginning any repair
• Handle the part carefully to avoid damaging edges, clips or mounting tabs
• Keep fasteners and any hardware from the original unit; verify fit and alignment before tightening
• If you see water or corrosion, dry and inspect surrounding components for damage before reassembly

This insert is a small trim/cover piece that restores the finished appearance and protects internal edges where fitted. Replacing a damaged or missing insert helps prevent debris buildup and keeps the appliance looking and functioning as intended. What it does

• Covers exposed openings or edges to provide a finished appearance
• Protects internal components from debris and accidental contact
• Stops rattling or movement caused by a cracked or loose insert
• Helps maintain proper alignment of adjacent trim or panels

• One insert as shown

• Typically installs with snap-fit tabs or screws; align and press or fasten securely
• If part is behind a panel, remove the outer panel before installing
• Disconnect power before accessing areas with electrical components or heating elements
• Use only manufacturer-recommended fasteners; replace any broken clips to ensure secure fit

This sealing gasket replaces a worn or damaged seal to help prevent leaks and maintain proper sealing in the appliance. It restores a secure fit where the original seal has hardened, cracked, or lost flexibility. What it does:

• Provides a watertight seal at the mating surfaces to reduce leaks and drips
• Helps maintain proper pressure and containment of fluids during operation
• Prevents debris and odors from passing through compromised gaps
• Commonly replaced when visible cracks, flattening, or leaks occur

• Disconnect power and turn off water supply before starting any repair
• Remove the old seal carefully to avoid damaging surrounding parts
• Ensure mating surfaces are clean and dry before fitting the new seal
• Verify proper orientation and seating; do not use sealants unless explicitly specified by OEM