She56c02uc/22 Parts

Spring-style hose clamp that secures flexible water hoses to fittings on select appliances, helping maintain a leak-tight connection at hose joints. Keeps hoses seated to reduce leaks and ensure reliable water flow. What it does:

• Holds flexible inlet, drain, or circulation hoses tightly on barbed fittings and nipples.
• Prevents leaks and water loss at hose connections by maintaining steady clamp pressure.
• Common signs it needs replacement: dripping or pooling near hose connections, a loose or wobbly hose, or visible clamp corrosion or deformation.
• Small, inexpensive part that restores a secure hose connection when the original clamp has failed.

• Always disconnect power and shut off the water supply before servicing appliance plumbing.
• For spring-style clamps, use pliers to open the clamp, position it over the hose, and release slowly so it seats properly; ensure the hose is fully pushed onto the fitting.
• Inspect the hose and fitting for damage; replace the hose if cracked or excessively worn before installing a new clamp.
• Wear eye protection when compressing or releasing spring clamps to avoid injury from sudden release.

The Insulating Part is an OEM part for Bosch dishwashers. It serves as a protective barrier, dampens sound and helps to maintain temperature during the wash cycle. The insulating cover is responsible for reducing heat loss and reducing noise from the dishwasher.  

A bad insulating cover can occur due to wear and tear, exposure to moisture, or accidental damage. Signs of a faulty cover include visible cracks, warping, or deterioration of the insulation material.

Symptoms of a bad insulating cover include:

• Heat loss during the wash cycle 
• Louder than normal during operation
• Damage to the insulation

Replace your damaged or worn-out insulating cover with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This holder secures internal components to keep assemblies aligned and stable, reducing vibration and wear. It's a simple replacement that restores proper fit where a broken or missing clip causes loose panels or noisy operation. What it does

• Secures and aligns panels or wiring harnesses inside the appliance
• Prevents rattling, vibration, and misalignment caused by damaged or missing clips
• Helps maintain proper component spacing to avoid wear or interference
• Restores secure attachment after breakage or plastic fatigue

• Disconnect power and water before starting any repair
• Remove access panels or trim to reach the damaged clip—keep fasteners organized
• Press or snap the holder into place; replace any broken tabs before reassembling
• If plastic anchors are damaged, replace them with matching OEM clips

This replacement worm gear is a small plastic drive gear that transmits rotational motion between the motor and driven components, restoring normal gear-driven movement and reducing slipping or grinding. What it does:

• Transfers torque from the motor to the mating gear or gearbox for proper mechanical operation
• Replaces worn, stripped, or damaged worm teeth that cause slipping or loss of drive
• Stops grinding, clicking, or intermittent movement when the gear is the fault
• Helps restore smooth, consistent operation of the driven mechanism when installed correctly

• One worm gear

• Disconnect power to the appliance before beginning any repair
• Inspect mating gears and shafts for wear; replace worn parts to prevent repeat failure
• Use OEM-approved lubricant only where specified; do not force or overtighten mating components

Electronic program control module that manages wash cycles, timing and communication between sensors, valves and the user interface. Replaces a failed control board to restore proper cycle selection and reliable dishwasher operation. What it does:

• Controls program sequencing, cycle timing and user-command processing for the appliance.
• Sends and receives signals to pumps, valves, heaters and door/latch switches to coordinate wash functions.
• Can cause symptoms such as no start, cycles that won't advance, blank or erratic display/LEDs, unresponsive buttons, or intermittent operation.
• Required when diagnostics or OEM documentation identify the main control board as the fault source.

• Disconnect power at the breaker or unplug the appliance before servicing to avoid electrical shock.
• Handle the board by the edges and avoid touching circuitry; static discharge can damage electronic components.
• Compare the replacement board to the original by part number and connector locations before installation.
• Reconnect all wiring harnesses securely and restore power to confirm normal operation.

This is the left side hinge plate. For right side use 00298570.

This electrical control switch completes or interrupts the power circuit that runs a specific appliance function, restoring on/off control for responsive operation and safer use. What it does:

• Acts as the user-activated or circuit-activated on/off control for a discrete function
• Restores power flow when the switch is made, allowing the associated component or cycle to run
• Common symptom: appliance function won't start or respond when the control is pressed or activated
• Common symptom: intermittent operation or no power to a given feature

• One switch

• Disconnect power to the appliance before attempting any service to prevent shock
• Access and replacement steps vary by model; follow the appliance service manual or schematic for safe disassembly
• Handle connectors carefully and confirm secure wiring/terminal seating after installation

The Outer Door is an OEM part for Bosch dishwashers. It serves as the protective outer layer of your dishwasher, providing a clean and polished appearance while also ensuring the safety of the internal components.

A bad outer door can occur due to wear and tear over time, accidental damage, or exposure to harsh cleaning agents. Signs of a faulty door include dents, scratches, or a loose fit that compromises the overall aesthetics and functionality of your dishwasher.

Symptoms of a bad outer door include:

• Visible dents, scratches, or damage
• Door not closing correctly

Replace your damaged or worn-out outer door with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

A programmed electronic control module that replaces the dishwasher's main control board to restore cycle selection and electronic functions. Installs as a direct replacement to resolve control-related failures and erratic operation. What it does:

• Replaces the dishwasher's central control to manage wash cycles, timers, and sensor inputs.
• Helps stop symptoms like no start, unresponsive touch controls, or interrupted cycles.
• Can clear or prevent intermittent faults caused by a failing main board.
• Works with the appliance's existing wiring harness and user interface.

• Turn off power to the appliance at the breaker before starting work.
• Handle the board by its edges and avoid contact with circuitry to prevent damage from static.

This installation set is the OEM hardware kit used to connect and install a dishwasher. It provides the fittings needed to attach water and drain lines so the appliance can be hooked up safely and correctly. What it does:

• Replaces a missing or damaged installation kit so the dishwasher can be properly connected
• Provides the fittings and connections needed for water inlet and drain hookup
• Helps ensure a secure, leak-free connection when installed per manufacturer instructions
• Useful when completing new installs or repairing installation hardware

• Turn off water and power to the appliance before beginning work
• Follow the appliance manufacturer's installation instructions and local codes
• Use proper tools and replacement seals; check all connections for leaks after installation

This power cord provides the appliance's main electrical connection, restoring reliable power when the original cord is damaged or failing. It replaces worn or frayed cords so the appliance can receive safe, consistent power. What it does:

• Carries mains electricity from the outlet to the appliance so controls and motors can run
• Replaces cords with visible damage, fraying, or exposed conductors
• Fixes symptoms like the appliance not powering on or losing power intermittently
• Prevents unsafe operation from a compromised cord that could cause arcing or overheating

• Always disconnect the appliance from power at the breaker or unplug before starting work
• Inspect strain relief and terminal connections; secure wires under terminals and tighten to spec
• Do not cut or splice the cord; replace with the correct, intact cord to maintain safety

The Tube Dishwasher is an OEM component for Bosch dishwashers. It is responsible for circulating water throughout critical spray arms during different cycles. 

Causes of a bad tube dishwasher can include mineral buildup reducing the tube diameter over time, physical damage from scraping dishware against the pipes, or wear from normal vibration/motion.

Symptoms of a bad tube dishwasher include:

• Incomplete spray coverage in hard-to-reach areas  
• Soft or spotty cleaning performance in certain sections
• Puddles or leaks at the tube installation points
• Dirty or stagnant water unable to circulate properly

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This door lock is the latch assembly that secures the dishwasher door and tells the control when the door is closed so cycles can start and run safely. It restores proper door closure and control interlock function. What it does:

• Secures the dishwasher door during operation to prevent accidental opening
• Engages the door-switch/sensor so the control will start and continue a cycle
• Prevents water from spilling by ensuring the door stays fully latched during wash
• Common symptom fix: dishwasher won't start or stops mid-cycle because the door won't lock

• One door lock / latch assembly as shown

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access typically requires removing the inner door panel; handle the door panel and wiring gently
• Test door operation and run a short cycle after installation to verify proper function