Shp65t75uc/02 Parts

The Dishwasher Water Inlet Valve is an OEM part for Bosch dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle.  

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Detergent Dispenser is an OEM replacement part for Bosch dishwashers. It is located inside the dishwasher and is responsible for properly delivering detergent at the appropriate time during wash cycles. The detergent dispenser has a compartment that holds detergent tablets or pods, and a mechanism that releases the correct amount to efficiently clean dishes.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad detergent dispenser include:

• Detergent not dispensing or residue left in the dispenser
• Dirty dishes due to insufficient or improper detergent delivery
• Corrosion or buildup inside the dispenser area
• Dispenser door or cover cracked or damaged

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This base panel covers the lower-front opening of the dishwasher, protecting internal components and completing the finished look. Replace a bent, rusted, or missing panel to restore proper shielding and help reduce vibration and noise.

• Covers the bottom-front opening of the dishwasher
• Helps protect wiring, hoses, and moving parts from debris and accidental contact
• Contributes to sound damping and a clean, finished appearance
• Typical indicators: panel is dented, rusted, rattling, loose, or missing

• Disconnect power and turn off water supply before servicing
• Remove the mounting screws and support the old panel as you take it off
• Align the new panel and secure with the original hardware; do not overtighten
• Restore power and verify the panel is secure and free of vibration

The Frame is an OEM part for Bosch dishwashers that provides support and organization for your cutlery, offering a designated space for your forks, knives, spoons, and other utensils. 

A bad frame can occur due to wear and tear, accidental damage, or exposure to harsh chemicals. Signs of a faulty frame include cracks, broken sections, or difficulty in smoothly sliding the drawer in and out.

Symptoms of a bad frame include:

• Cracks or broken sections in the frame 
• Difficulty in sliding the cutlery drawer in and out
• Unorganized or unstable storage of cutlery 

Replace your damaged or worn-out frame with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This outer door panel restores the dishwasher's front appearance and protects internal door components from damage and moisture. It provides a clean finish and supports mounting for trim and hardware when in good condition. What it does:

• Covers and protects the inner door assembly from water, dirt and everyday wear.
• Provides the finished exterior surface and attachment point for the handle/trim hardware.
• Helps maintain proper door alignment and sealing when not dented or warped.
• Common symptoms: visible dents, scratches, rust or a damaged exterior that affects appearance or function.

• Disconnect power to the appliance before beginning any work.
• Remove the inner door trim and retain all fasteners; some components may need to be transferred to the new panel.
• Handle the panel carefully — it can be awkward and may have sharp edges.
• If seals, insulation, or trim are damaged, replace or re-seat them during reassembly; test the door for proper fit and operation after installation.

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This facia panel is the finished front cover that restores the dishwasher's appearance and protects the control area. Replacing a cracked or damaged facia returns a clean, finished look and helps shield internal components from debris. What it does:

• Provides the finished front surface and cosmetic cover for the dishwasher door/control area.
• Protects controls, wiring and connectors behind the door from moisture and debris.
• Replaces cracked, dented or heavily scratched facia that detracts from the appliance's appearance.
• Helps maintain proper alignment of trim and covers that sit at the front of the door.

• Disconnect power to the appliance before servicing to avoid shock or damage.
• Removal typically requires opening the door and removing screws or clips from the inner door panel; follow the model-specific service instructions.
• Handle clips and mounting tabs carefully to avoid breakage; reuse existing hardware if undamaged.

This replacement control panel button restores a worn, broken or missing push button so your appliance's controls can be operated easily and reliably. It matches the original shape and snap-fit for a clean finish. What it does

• Acts as the user interface button on the appliance control panel for selecting cycles or features
• Replaces cracked, stripped, loose or missing buttons that won't depress or return properly
• Helps restore tactile feedback and proper button travel for responsive control input
• Prevents debris and moisture from entering the switch area when installed correctly

• Replacement control panel button (single)

• Power off and disconnect the appliance before attempting any repair
• Typically installs by snapping into the control panel; access may require removal of the front panel or control console
• Avoid forcing the part; align tabs and press evenly until it clicks into place
• If the underlying switch or actuator is damaged, replace both components to ensure proper function

This facia panel is the front trim piece that covers and protects the appliance's control area, restoring the original appearance and providing a finished surface for buttons and displays. What it does

• Covers and protects the control area from spills, dirt, and everyday wear
• Restores a clean, undamaged front appearance when the original panel is cracked, scratched, or faded
• Helps keep control buttons and display trim aligned and securely mounted
• Prevents loose or hanging trim that can catch on clothing or interfere with door operation

• Disconnect power to the appliance before beginning any work
• Removal of the door trim or control bezel may be required — keep all screws and small parts organized
• Align mounting tabs carefully during installation to avoid cracking the new panel
• Handle assemblies gently and avoid forcing connectors

This push button is a direct-replacement control panel button that restores a worn, cracked, or unresponsive selector on the appliance. It gives a like-new tactile feel so you can reliably select cycles and options. What it does:

• Replaces a broken, cracked, or non-responsive control panel button
• Restores tactile feedback and reliable user input on the control/display panel
• Helps stop buttons from sticking or failing to engage the switch beneath
• Fits into the existing button bezel and interfaces with the original switch mechanism

• Disconnect power (unplug or shut off circuit breaker) before beginning any work
• Remove the control panel trim or bezel to access and gently snap the old button out from the front
• Press the new button into place until it seats; verify proper engagement with the switch underneath

This support is a replacement mounting bracket that secures internal components and helps maintain proper alignment. It restores stability and reliable operation after damage or wear to the original support. What it does:

• Provides structural support for internal assemblies to prevent sagging or misalignment
• Helps keep parts positioned correctly to reduce rubbing, noise, or binding
• Restores proper fit after a cracked or bent support causes operational issues
• Compatible with the appliance's factory mounting points for a direct-fit replacement

• Install with the appliance powered off and disconnected from the mains
• Use correct fasteners and torque to avoid stress or deformation of the support
• Inspect nearby components for damage and replace as needed while access is available