Shp87pw55n Parts

The Control Module/Panel is an OEM part for Bosch dishwashers. As the central command hub, it processes user inputs to seamlessly operate all washing and drying functions. Neatly housed behind the control interface, the control module utilizes circuitry and programming to direct cycle commands.

Causes of a bad control module/panel can include failures of internal electronic components over extended use. Repeated exposure to moisture and detergents may degrade circuit boards.

Symptoms of a bad control module/panel include:

• Non-responsive buttons or displays
• Inability to select cycles or options
• Failure to initiate water fill or temperature regulate
• Fault codes appearing unexpectedly

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Leveling Leg is an OEM replacement part for Bosch dishwashers. It permits adjustment to compensate for uneven floor surfaces, leveling the dishwasher, and ensuring proper drainage. Precise leveling facilitates water collection and effective cleaning performance. 

Symptoms of a bad leveling leg can include broken or stripped threads preventing adjustment, and conditions that promote rocking during operation. 

Causes of a bad leveling leg include:

• Loose or unstable mounting where legs spin freely  
• Legs unable to securely lock into position once adjusted   
• Drainage issues such as standing water or poor rinsing
• Excessive vibration or noise heard from the leveling area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Detergent Dispenser Seal is an OEM part for Bosch dishwashers. Located inside the detergent dispenser compartment, it creates a water-tight barrier, preventing premature detergent dissolution and leaks. Working seamlessly with the dispenser system, the seal facilitates controlled detergent release for optimum cleaning performance cycle after cycle. 

Causes for a bad detergent dispenser seal can include wear and tear from repeated use, deformations due to temperature fluctuations, and cracks or splits from general use.  

Symptoms of a bad detergent dispenser seal include:

• Detergent residue or puddles inside the dishwasher  
• Premature detergent dissolution before the main wash
• Leaks or drips from the dispenser area when closed
• Ineffective or inconsistent cleaning ability

This genuine Bosch detergent dispenser seal replacement will restore its water-tight barrier. It is also compatible with some Thermador, Siemens, and select Kenmore models.

The Sump is an OEM part for Bosch dishwashers. It is located at the bottom of the dishwasher's tub, responsible for filtering and recirculating water during the wash cycle. The sump is designed to collect and filter out food particles and debris from the water, ensuring that only clean water is circulated throughout the dishwasher. It also houses the circulation pump, which propels the water through the spray arms to effectively clean your dishes.

A bad sump can occur due to clogs, damage, or wear and tear over time. Signs of a faulty sump include poor cleaning performance, water not draining properly, or unusual noises during operation.

Symptoms of a bad sump include:

• Food particles or residue left on dishes
• Water not draining properly 
• Unusual noises during operation

Replace your faulty dishwasher sump with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This door latch interlock secures the appliance door and signals the control when it's safely closed, allowing cycles to start and run without interruption. Replacing a worn latch restores reliable starts and proper safety interlock function.

• Locks the door closed during operation to prevent interruptions
• Sends a "door closed" signal to the control so a cycle can start
• May resolve issues like failure to start or stopping when the door is bumped
• Helpful when the door won't click shut or shows a "door open" alert

• Disconnect electrical power at the breaker before servicing
• Open the door and remove the inner-door screws to access the latch area
• Move connectors one at a time to the new latch; ensure each is fully seated
• Reassemble, verify the strike aligns for a positive "click," and run a short test cycle

This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.

• Fastens components to the appliance frame or assemblies
• Replaces a missing, stripped, or rusted original screw
• Helps reduce rattling or vibration from loose hardware
• Restores proper alignment of panels or brackets

• Disconnect power and shut off water before servicing
• Refer to your model's parts diagram to locate and place
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening

The Rail-Pull Out is an OEM part for Bosch dishwashers. It is responsible for smoothly gliding the dishrack in and out of the dishwasher for easy loading and unloading of dishes. 

Causes of a bad dishrack rail can include normal wear and tear from repeated use, damage from overloaded or unbalanced dishracks, or bent or damaged rails that no longer function properly. 

Symptoms of a bad dishrack rail include:

• The dishrack not sliding smoothly in and out 
• Issues fully extending or retracting the dishrack
• Noise or grinding sounds when operated
• Difficulty loading and removing dishes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models. 

The Power Cord is an OEM part for Bosch dishwashers. It provides electrical connection between the appliance and the power source to allow operation.

The power cord contains multiple insulated wire conductors capable of safely transferring electrical current at the proper voltage, fuse rating, and amperage required by the dishwasher motor and components. It terminates in a three-prong plug compatible with standard 110-120 volt outlets.

Symptoms of a bad power cord can include:

• The dishwasher failing to power on when plugged in
• Tripped circuit breakers or blow fuses each time the dishwasher runs
• Worn, cracked, cut or damaged outer insulation exposing wires
• Loose, disconnected or corroded connections at either end of the cord

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.

• Secures the toe-kick or lower access panel to the base/frame
• Restores proper fit when the original screw is lost or damaged
• Helps reduce panel rattles and vibration
• Maintains correct alignment and clearance at the bottom edge

• Disconnect power before servicing; also shut off the water supply
• Support the panel and align holes before threading the screw
• Start by hand to avoid cross-threading; tighten snugly—do not overtighten
• Verify size matches the original; replace matching hardware together if required by your model

The Cover is an OEM part for Bosch dishwashers. It serves as a protective barrier over vulnerable inner components. The cover helps prevent damage from spills, shields electronics from moisture, and blocks access to moving parts for safety.

Causes of a bad cover can be normal wear and tear, repeated impact damage, or improper handling during repairs.

Symptoms of a bad cover include:

• Cracks, holes or other physical damage
• Warping or deformation over time
• Loose or improper fit that exposes internal parts

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This factory replacement container restores the appliance's ability to securely hold contents as designed. Replace a cracked, leaking, or missing container to prevent messes and keep the interior organized and functioning properly. What it does

• Holds and contains items or liquid as intended by the appliance design
• Helps prevent leaks and spills when seated correctly and undamaged
• Replaces containers with cracks, warping, or broken tabs
• Addresses issues where the container won't stay in place or slides out unexpectedly

• One container

• Disconnect power; if the appliance is plumbed, turn off the water supply
• Open the access area and carefully remove the old container to avoid damage to surrounding parts
• Transfer any reusable lids/caps or fittings from the original container, if applicable
• Seat the new container fully and check for proper fit and leak-free operation

This sump screw secures the dishwasher's sump or sump cover to the tub, keeping the assembly tight and leak-resistant. Replace a missing, stripped, or damaged screw to restore a proper seal and stable mounting.

• Fastens the sump or sump cover to the dishwasher tub
• Helps maintain a watertight seal to reduce leaks
• Keeps filter/sump components aligned and secure
• Replaces missing, stripped, or damaged hardware
• Helps address leaks or rattling around the sump area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack and filters to access the sump area
• Ensure mating surfaces and seals are clean and properly seated
• Tighten snugly by hand; do not overtighten to avoid stripping

The Wire Harness is an OEM part for Bosch dishwashers. As the central connection hub, it comprises the bundled wiring that routes electrical power and signals throughout the dishwasher. The wire harness is discreetly located behind panels to power critical components like heating elements, water valves, circulation pumps and control boards.

Causes of a bad wire harness include cracked insulation, broken wires or damaged terminals due to normal wear over time. Repeated vibration during cycles and heat exposure can degrade the internal wiring.

Symptoms of a bad wire harness include:

• Intermittent or complete power loss mid-cycle
• Lights, displays and functions failing to illuminate/operate
• Error codes appearing
• Resistance preventing components from activating

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Divertor Motor is an OEM part for Bosch dishwashers.  This part controls the direction of water flow within the unit. This motor directs the water to different spray arms based on the selected wash cycle, ensuring efficient cleaning by optimizing water usage and spray intensity. 

Causes of damage to the divertor motor can include regular wear and tear, exposure to water and detergent over time, and electrical issues such as wiring problems or faults in the control board.

Symptoms of a failing Divertor Motor include:

• Inadequate water distribution during cycles, which can lead to uneven cleaning results.
• The dishwasher making unusual noises, such as humming or grinding, which may indicate a struggle in the motor function.
• Certain wash zones receiving little to no water, affecting the appliance's overall performance.
• Error codes displayed on the dishwasher panel that relate to water circulation problems.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Cup Rack is an OEM part for Bosch dishwashers. It is designed to fit inside the dishwasher tub and provide storage for cups, mugs, and other drinking vessels during the wash cycle.

Causes of a bad cup rack can include broken or missing prongs, cracks in the plastic that compromise stability, or difficulties with the rack sliding smoothly in and out of the tub.

Symptoms of a bad cup rack include:

• Cups and mugs not drying properly or falling over during the cycle
• Difficulty loading and removing cups from the rack
• Excessive noise or vibration coming from the cup rack area
• Inability to secure the cup rack fully inside the tub

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This factory fastener secures panels, brackets, or internal components in your appliance, helping keep assemblies tight and rattle-free. Replace missing or stripped screws to restore a secure fit and dependable operation.

• Fastens components to the appliance frame, chassis, or panel assemblies
• Helps maintain alignment and reduce vibration or rattling
• Replaces lost, rusted, or stripped screws during service
• Common signs it's needed: loose panel or handle, vibration noises, or parts that won't stay secured

• Disconnect power and shut off water or gas before servicing
• Match the screw's location and length to the original from your model
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver type/size specified for your model's screw head