Shpm65z56n Parts

The Dishwasher Water Inlet Valve is an OEM part for Bosch dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle.  

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Toe Panel Support Bracket is an OEM part for Bosch dishwashers. This part provides support and stability to the toe panel, which is the panel at the bottom of the dishwasher's front.

Causes of a bad part can include physical impact, improper installation, or general wear and tear over time, leading to weakening or damage of the support bracket.

Symptoms of a bad Toe Panel Support Bracket can include:

• Looseness or instability of the toe panel
• The toe panel becoming detached or falling off
• Difficulty in properly aligning or installing the toe panel
• Visible damage or cracks in the support bracket itself

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Power Module Programmed is an OEM component specifically designed for Bosch dishwashers. It houses the integrated control board that oversees all critical dishwasher functions including cycle selection, temperature regulation, leak detection, and timing of the various wash and rinse stages.

Symptoms of a bad power module can include:

• Faulty or non-responsive controls 
• Inability to select or advance through cycles
• Flashing error codes on the display
• Abnormal sounds or smells from the unit

Causes of failure include wear over time leading to shorts or opens in the circuitry, moisture damage corroding connections, or software bugs in the onboard programming.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace to restore full cycle functionality and extend the life of your dishwasher.
 

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

The Insert is an OEM component specifically designed for select Bosch dishwashers. Located inside the tub basin, the tines provide the necessary friction to help clean dishes. 

Causes of a bad insert can include mineral buildup that prevents proper movement or damage from dropped utensils that have bent the tines out of place.

Symptoms of a bad insert include:

• Dishes still feeling dirty after the wash cycle   
• Rust or mineral deposits visible on the tines
• Tines that are bent or missing which reduces cleaning surface area

Replacing the insert with this OEM Bosch part restores optimal cleaning performance. Compatible with 300 series models, it features stainless steel construction that withstands corrosion from detergents. This replacement insert is warranted to perform as the original Bosch design for reliable dish cleaning.