Shs-H705 Parts

The Panel Facia is an OEM part for Bosch dishwashers. It is the front control panel of your dishwasher, providing a clean and polished look.

A bad panel facia can occur due to wear and tear over time, accidental damage, or exposure to moisture and cleaning agents. Signs of a faulty facia include cracks, discoloration, or a loose fit that compromises the aesthetic appeal of your dishwasher.

Symptoms of a bad panel facia include:

• Cracks or visible damage on the surface
• Discoloration or fading
• A loose or missing panel

Replace your damaged or worn-out panel facia with this genuine OEM Bosch part to restore the appearance of your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This programmed power module is the appliance control board that supplies and manages electrical power to key systems, restoring reliable control and operation when the original module fails. What it does

• Provides regulated power and switching for the appliance's control systems.
• Replaces a failed or intermittent control module that causes no power, blank display, or unresponsive controls.
• Can resolve erratic operation, random shutoffs, or certain control error codes tied to the power/control board.
• Matches OEM function so the appliance's control circuits operate as intended.

• One programmed power module.

• Disconnect all power before starting; risk of electric shock if not de-energized.
• Handle the module carefully to avoid static discharge; use ESD precautions.
• Follow OEM wiring and mounting locations exactly; secure all connectors fully.

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This facia panel is the front control surface that restores the appearance and user interface of your dishwasher. It replaces a cracked, dented, or worn front panel so buttons and display sit flush and look factory-original. What it does:

• Covers and protects the control buttons and electronic display area from spills and damage
• Restores a secure mounting surface for the control assembly and switches
• Eliminates sharp edges, cosmetic damage, or gaps that allow moisture into the control area
• Helps ensure buttons and indicator lights align and operate correctly when the control is intact

• Recommended for users comfortable with basic appliance disassembly; remove power before starting
• Typically requires removing the door inner panel or trim to access mounting screws—keep track of fasteners
• Handle panel carefully to avoid scratching the finish during installation

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This fascia panel is the front cover for the appliance's control area. It restores a clean, finished appearance and proper support for the user interface, helping protect the control components and ensuring controls align and operate as intended.

• Provides the outer cover for the console/control area
• Supports and aligns buttons/knobs or touch interfaces and display windows
• Helps shield the control assembly from impacts, dust, and moisture
• Common signs it's needed: cracks, broken tabs, warping, looseness, or misaligned controls

• Disconnect power to the appliance before servicing
• Remove the fasteners/clips securing the old fascia and retain hardware
• Transfer any trim/nameplate or user-interface module from the old part if required
• Position the new panel, secure fasteners evenly, and verify control operation

This facia panel is the exterior trim that covers and protects the appliance's control area, restoring a clean, finished appearance and ensuring buttons and displays sit flush with the front. Ideal for replacing cracked, faded, or damaged panels. What it does:

• Replaces the visible front trim around the control area so buttons and displays are properly covered
• Protects internal control components from spills, dust, and everyday wear
• Restores original appearance when the factory panel is cracked, warped, or discolored
• Helps ensure user controls are mounted securely and accessible

• One facia panel (control panel trim)

• Install with appliance powered off; disconnect power before servicing electrical components
• Handle carefully to avoid scratching the finish; use manufacturer-specified screws/clips

This cover is a molded protective housing that replaces a cracked or missing outer piece to restore a secure fit and protect internal components from debris and damage. It helps keep wiring and small parts shielded during normal use. What it does:

• Protects internal components and wiring from dirt, moisture, and impact
• Restores proper fit and alignment where a damaged cover allowed movement or rubbing
• Reduces rattles or vibration caused by loose or broken housing pieces
• Keeps serviceable parts accessible while maintaining a finished appearance

• One cover

• Disconnect power to the appliance before starting any repair
• Remove any access panels or fasteners that obstruct the old cover
• Align the replacement cover with mounting tabs or screw holes and secure using original fasteners
• If clips or tabs are damaged, replace them before completing reassembly; inspect surrounding parts for damage

This adjusting device helps align and fine-tune moving parts so doors and components operate smoothly. It's a direct-fit replacement designed to restore proper adjustment and reliable positioning for compatible Bosch appliances. What it does:

• Provides precise adjustment of movable assemblies to correct alignment issues
• Helps reduce binding, rubbing, or uneven gaps at doors or panels
• Restores intended movement and positioning for better operation
• Works as the factory replacement part specified for alignment tasks

• One adjusting device

• Designed for direct replacement; use the appliance's service instructions or OEM guide for correct placement
• Turn off power to the appliance before servicing to avoid injury
• Keep fasteners and mounting orientation the same as the original part during installation

This support is a replacement mounting bracket that helps secure and stabilize internal appliance components for proper alignment and operation. Replacing a worn or broken support restores fit and reduces movement-related noise or malfunctions. What it does

• Holds internal components or assemblies in their correct position to prevent shifting during operation
• Restores proper alignment that can affect door fit, drawer travel, or rotating parts
• Reduces vibration and rattling caused by a loose or damaged support
• Suitable when the original support is cracked, bent, or missing

• One support as shown

• Disconnect power and, if applicable, water supply before beginning any repair
• Remove surrounding panels or assemblies as needed to access the support; keep fasteners for reassembly
• Inspect adjacent clips, screws, and mounting points; replace any damaged hardware