Shs5avl2uc Parts

This lock clamp is a small retaining clip that secures a component or connection inside the appliance. It keeps parts firmly seated and aligned to help prevent loosening, misalignment, or accidental disconnection during normal operation.

• Locks and retains the associated fitting or component in place
• Maintains a secure, correctly aligned connection
• Helps resist vibration-related movement during use
• If worn, broken, or missing, you may notice a loose connection, rattling, parts separating, or leaks at the joint

• Disconnect power; shut off water supply if the repair involves a water path
• Note the clip's orientation/position before removal (take a quick photo for reference)
• Use needle-nose pliers or a small flat-blade tool to release/install; avoid over-bending
• The component is fully seated and the clip is fully engaged before reassembly

This cable harness routes power and signals between appliance control and components to restore reliable electrical connections. It replaces a damaged or worn harness to help eliminate intermittent operation and connectivity issues. What it does:

• Replaces the main wiring harness that links controls, sensors, and motors for proper electrical communication
• Restores reliable power and signal paths to correct intermittent power, non-responsive controls, or components that won't run
• Ensures secure connector mating to prevent arcing and poor contact
• Matches OEM connector types and wire lengths to fit in the original routing

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock
• Compare the new harness to the old one for connector types and routing before installation
• Handle connectors by the housings; do not pull on wires. Ensure all plugs snap fully into place

This dishwasher cup shelf mounts to the upper rack to hold cups, mugs, stemware, and small items securely. Replace a broken or missing shelf to keep items upright and organized throughout the wash cycle.

• Provides a platform on the upper rack for cups, mugs, stemware, and small items
• Helps keep items upright and reduces movement during wash and rinse
• Restores proper loading when the original shelf is cracked, loose, or missing
• Common signs: broken mounting tabs, shelf won't stay in place, cups tipping over

• Unload the upper rack; removing the rack can make access easier
• Align the shelf's mounting tabs with the rack wires and snap firmly into place
• Confirm the shelf moves freely and does not interfere with the spray arm
• Test with a light load to ensure secure placement before full use

This outer door is the exterior front panel that restores the appliance's appearance and protects internal door components. It provides a clean finished look while helping keep controls and inner parts covered and secure. What it does

• Replaces a dented, scratched, or corroded front door panel to improve appearance
• Protects inner door assembly, insulation, and controls from moisture and impact
• Helps maintain proper alignment so the door opens and closes smoothly
• Can reduce drafts or light gaps caused by a damaged outer panel

• One outer door

• High-level replacement; door removal and partial disassembly are typically required
• Support the door while removing fasteners to avoid dropping or bending the panel
• Keep track of screws, brackets, and trim pieces; transfer any attached components to the new panel
• Disconnect power to the appliance before starting and follow all safety precautions

This facia panel is the exterior trim that covers and protects the appliance control area, restoring a clean, finished appearance and protecting controls from dirt and moisture. Ideal when the original panel is cracked, scratched, or warped. What it does

• Replaces damaged or worn control panel trim to restore appearance and protect underlying electronics
• Provides a sealed surface that helps prevent dirt and moisture from reaching buttons and switches
• Keeps control labels and button openings aligned for proper user operation
• Useful when panel cracking, chipping, loose fit, or cosmetic damage affects the front of the unit

• One facia panel (single trim piece)

• Disconnect power to the appliance before starting any repair
• Remove outer door/console trim or control assembly per service instructions to access mounting screws
• Keep track of small fasteners and any clips during removal and reassembly

This is a single replacement mounting screw used to secure panels, trim, or components on compatible appliances. It restores proper fit and prevents parts from coming loose or vibrating during operation. What it does

• Secures panels, brackets, or components in place to maintain appliance alignment
• Stops rattling or vibration caused by loose fasteners
• Helps ensure switches, doors, or trims stay properly seated
• Replaces missing or stripped screws to restore original fit

• One replacement screw

• Use the correct driver and size; start threads by hand to avoid cross-threading
• Tighten securely but avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow appliance safety precautions when accessing internal parts

This lock clamp secures the appliance door latch assembly so the door closes and seals reliably. It replaces a worn or broken clamp to restore proper latch engagement and help prevent door misalignment or failure to stay closed. What it does

• Holds the door latch or interlock assembly in position so the door can securely close
• Helps restore normal door engagement when a loose or damaged clamp causes the door to sag or not latch
• Commonly replaced when the door makes noise, feels loose, or the latch does not align
• Works with the latch housing and nearby mounting hardware to keep the lock mechanism stable

• One lock clamp (single clamp only)

• High-level replacement: usually accessed from the door or control area; remove power before servicing
• Inspect adjacent latch, springs, and mounting screws and replace any damaged parts
• Tighten fasteners to secure the clamp without overtightening or deforming plastic parts

The Detergent Dispenser is an OEM replacement part for Bosch dishwashers. It is located inside the dishwasher and is responsible for properly delivering detergent at the appropriate time during wash cycles. The detergent dispenser has a compartment that holds detergent tablets or pods, and a mechanism that releases the correct amount to efficiently clean dishes.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad detergent dispenser include:

• Detergent not dispensing or residue left in the dispenser
• Dirty dishes due to insufficient or improper detergent delivery
• Corrosion or buildup inside the dispenser area
• Dispenser door or cover cracked or damaged

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This Base Panel mounts at the bottom of the appliance to give a clean, finished look while shielding internal components from dust and impact. Replace a cracked, bent, or missing panel to restore proper coverage and reduce noise.

• Shields the lower chassis and wiring from dust and debris
• Provides a finished toe-kick/front appearance
• Helps maintain designed airflow and reduce noise at the base
• Typical reasons to replace: cracked, bent, missing, or won't fasten securely

• Disconnect power at the breaker; shut off gas
• Wear cut-resistant gloves—panel edges can be sharp
• Support the panel while removing fasteners; note orientation and any clips/insulation
• Transfer any reusable clips/insulation and secure the new panel without overtightening

This stress relief is a small strain-relief clip that protects wiring where the harness passes through the cabinet, reducing pull and chafing on connections. Replacing a worn clip helps prevent loose wires and intermittent electrical issues. What it does:

• Secures the appliance wiring at an entry point to reduce strain on terminals and connectors.
• Prevents chafing and abrasion of wire insulation where harnesses pass through the cabinet or mounting openings.
• Can reduce symptoms such as intermittent power, flickering controls, or visible loose/frayed wires at the harness.
• Simple mechanical part: no electrical function but critical for long-term wiring reliability.

• Disconnect power (unplug appliance or switch off breaker) before accessing wiring; turn off gas supply where applicable.
• Remove panels as needed to access the harness entry; seat the clip fully so wires are routed through the relief, not pinched.
• Inspect surrounding wiring and replace any frayed or damaged wires; do not use the clip to conceal damaged wiring.

The Handle is an OEM part for Bosch dishwashers. It provides the surface for securely grasping and maneuvering the dishwasher door during opening and closing. 

Causes of a bad handle can include wear and tear from ongoing grasping motions. Repeated lifting and adjusting of the door places stress on handle components over time.

Symptoms of a bad handle include:

• Looseness, wobbling or detachment from the door assembly
• Sharp edges, cracks or splits compromising a firm grip
• Reduced ability to precisely guide the door into position

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This micro filter is a fine-mesh replacement filter that traps food particles and debris in the dishwasher sump, helping maintain wash performance and protect the pump and drain from clogs. What it does:

• Captures small food particles to prevent recirculation and reduce spotting
• Helps keep the dishwasher drain and pump from clogging
• Supports consistent water flow for better cleaning results
• Can reduce odors caused by trapped debris in the filter area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack to access the sump area; follow your owner's manual for filter removal
• Ensure the filter is properly seated and locked before running a cycle
• Clean surrounding areas and inspect for additional debris while replacing the filter

The Pump Housing is an OEM part for Bosch dishwashers. It houses the circulating pump and motor assembly that circulates water throughout the dishwasher during all wash cycles. Located inside the dishwasher's sump, the pump housing plays a key role in water recirculation, pick-up, and distribution of water to spray arms for optimal cleaning performance.

Symptoms of a defective pump housing include: 

• Incomplete or weak water spray from arms
• Gaps in wash or rinse coverage 
• Soap residue or buildup clinging to dishes
• Sounds of grinding, rubbing, or vibration from the pump area

Causes of pump housing issues are often external damage or cracks incurred from impact or hard water mineral scale deposits built up over time. Replacing with this OEM housing restores peak water circulation for sparkling dishes.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This base panel is the lower kickplate that covers the appliance's front base opening and gives the unit a finished appearance while protecting internal components. It restores the clean look and helps block debris from the cavity. What it does:

• Replaces a damaged, dented, or missing lower kickplate to restore appearance
• Covers and protects internal components at the appliance base from dust and spills
• Helps keep pests and larger debris out of the cavity under the appliance
• Contributes to proper airflow routing at the appliance front (where applicable)

• Designed to mount with the factory fasteners; retain original screws or clips when possible
• Lift or tilt the appliance as needed for access—follow manufacturer safety guidance
• Disconnect power before attempting service that requires moving or tilting the unit
• If fasteners are missing or damaged, replace with manufacturer-specified hardware

This facia panel is the exterior trim that covers and protects the appliance control area, restoring a finished look and shielding buttons and electronics from spills and wear. It fits into the control opening and provides the visible surface users touch. What it does:

• Covers and protects the control/buttons area from spills, grease, and daily wear
• Restores the appliance's finished front appearance after damage or removal
• Keeps underlying electronic components and switches shielded from debris
• Provides the correct mounting surface for control buttons and overlays

• Disconnect power to the appliance before attempting removal or installation
• Installation typically requires removal of trim or access panels and careful alignment of clips or screws
• Use a non-marring tool to avoid scratching the finish; do not force fasteners
• Verify button alignment and function before restoring power