Shs5avl5uc/22 Parts

This outer door panel replaces a dented or damaged front on your dishwasher, restoring a clean, factory look and providing the correct mounting surface for the handle and control trim.

• Forms the exterior front of the dishwasher door and covers the inner door assembly
• Provides mounting points for the handle and trim; aligns with your model's control panel design
• Helps keep door insulation in place and reduces vibration
• Typical signs you need this part: dents, deep scratches, bent corners, loose/rattling panel, misaligned handle or trim

• Disconnect power and shut off water supply before beginning
• Open the door and support the panel while removing the inner-perimeter Torx screws
• Separate the old panel and transfer any handle or trim components to the new panel as required
• Use gloves and care—edges can be sharp; reinstall screws evenly without overtightening

This insulating part restores the factory isolation and protection between components inside your appliance. Replacing a worn or missing insulator helps prevent damage from heat or contact so the unit operates safely as designed. What it does:

• Provides the specified insulation and spacing where installed
• Helps prevent heat transfer, shorting, or abrasion between adjacent parts
• Restores proper fit when the original insulator is cracked, deformed, or missing
• Common signs include discoloration, charring, brittleness, or the old piece crumbling/falling out

• 1 insulating part

• Disconnect power and allow the appliance to cool completely before service; shut off water or gas if applicable
• Note the original orientation and placement; take photos for reference
• Install without over-compressing; ensure it seats flat and does not interfere with nearby parts
• Reassemble, restore power, and test for normal operation

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This facia panel is the appliance's front control surface that covers and protects the control buttons and display, restoring a clean appearance and keeping the underlying electronics safe from spills and debris. What it does

• Covers and protects the control board, buttons, and display from moisture, crumbs, and impact.
• Provides the finished front surface for user controls and button/knob mounting.
• Restores cosmetic appearance when the original panel is cracked, scratched, or discolored.
• Helps ensure buttons and indicators remain aligned and accessible for normal operation.

• Disconnect power to the appliance before starting any service.
• Removing the old panel may require removing trim pieces or controls; keep screws and small parts organized.
• Handle edges carefully—panels and attached components can have sharp edges or glass/paint finishes.
• Refer to the appliance's service manual or wiring diagram for safe removal/reinstallation and torque/spec guidance.

This fascia panel replaces the front console trim on your appliance, restoring a clean, finished look and a solid-feeling control area. It covers and supports the user interface components behind the console. What it does:

• Provides the finished front surface for the console and supports switches/display components
• Helps protect internal controls at the console area from everyday use
• Replaces cracked, warped, or discolored panels for a like-new appearance
• Corrects loose, rattling, or misaligned consoles caused by broken tabs or mounts

• 1 fascia panel

• Disconnect power before servicing
• Remove the screws/clips securing the old fascia; support the user interface as you separate the panel
• Transfer any control board, button caps, light pipes, and mounting hardware from the old panel to the new one
• Align tabs and do not overtighten screws into plastic

This facia panel is the front control surface that restores the appearance and user interface of your dishwasher. It replaces a cracked, dented, or worn front panel so buttons and display sit flush and look factory-original. What it does:

• Covers and protects the control buttons and electronic display area from spills and damage
• Restores a secure mounting surface for the control assembly and switches
• Eliminates sharp edges, cosmetic damage, or gaps that allow moisture into the control area
• Helps ensure buttons and indicator lights align and operate correctly when the control is intact

• Recommended for users comfortable with basic appliance disassembly; remove power before starting
• Typically requires removing the door inner panel or trim to access mounting screws—keep track of fasteners
• Handle panel carefully to avoid scratching the finish during installation

This lock clamp is a small retaining clip that secures a component or connection inside the appliance. It keeps parts firmly seated and aligned to help prevent loosening, misalignment, or accidental disconnection during normal operation.

• Locks and retains the associated fitting or component in place
• Maintains a secure, correctly aligned connection
• Helps resist vibration-related movement during use
• If worn, broken, or missing, you may notice a loose connection, rattling, parts separating, or leaks at the joint

• Disconnect power; shut off water supply if the repair involves a water path
• Note the clip's orientation/position before removal (take a quick photo for reference)
• Use needle-nose pliers or a small flat-blade tool to release/install; avoid over-bending
• The component is fully seated and the clip is fully engaged before reassembly

Facia Panel (control panel trim) restores the appliance's finished appearance while protecting the control area. It covers buttons and the control housing, helping keep dirt and moisture away from the electronics and improving usability. What it does:

• Covers and protects control buttons, displays, and underlying electronics.
• Restores a damaged, cracked, or scratched front control surface for a clean look.
• Helps reduce debris, grease, and moisture exposure to controls.
• Replaced when the control trim is loose, broken, or cosmetically worn.

• Always disconnect power (unplug or shut off the circuit) before starting any work.
• Access may require removing the outer door trim or control housing; basic hand tools (screwdriver) are typically used.
• Handle the panel carefully to avoid sharp edges or cosmetic damage; align clips and fasteners before tightening.

This cable harness routes power and signals between appliance control and components to restore reliable electrical connections. It replaces a damaged or worn harness to help eliminate intermittent operation and connectivity issues. What it does:

• Replaces the main wiring harness that links controls, sensors, and motors for proper electrical communication
• Restores reliable power and signal paths to correct intermittent power, non-responsive controls, or components that won't run
• Ensures secure connector mating to prevent arcing and poor contact
• Matches OEM connector types and wire lengths to fit in the original routing

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock
• Compare the new harness to the old one for connector types and routing before installation
• Handle connectors by the housings; do not pull on wires. Ensure all plugs snap fully into place

This dishwasher cup shelf mounts to the upper rack to hold cups, mugs, stemware, and small items securely. Replace a broken or missing shelf to keep items upright and organized throughout the wash cycle.

• Provides a platform on the upper rack for cups, mugs, stemware, and small items
• Helps keep items upright and reduces movement during wash and rinse
• Restores proper loading when the original shelf is cracked, loose, or missing
• Common signs: broken mounting tabs, shelf won't stay in place, cups tipping over

• Unload the upper rack; removing the rack can make access easier
• Align the shelf's mounting tabs with the rack wires and snap firmly into place
• Confirm the shelf moves freely and does not interfere with the spray arm
• Test with a light load to ensure secure placement before full use

This outer door is the exterior front panel that restores the appliance's appearance and protects internal door components. It provides a clean finished look while helping keep controls and inner parts covered and secure. What it does

• Replaces a dented, scratched, or corroded front door panel to improve appearance
• Protects inner door assembly, insulation, and controls from moisture and impact
• Helps maintain proper alignment so the door opens and closes smoothly
• Can reduce drafts or light gaps caused by a damaged outer panel

• One outer door

• High-level replacement; door removal and partial disassembly are typically required
• Support the door while removing fasteners to avoid dropping or bending the panel
• Keep track of screws, brackets, and trim pieces; transfer any attached components to the new panel
• Disconnect power to the appliance before starting and follow all safety precautions

This facia panel is the exterior trim that covers and protects the appliance control area, restoring a clean, finished appearance and protecting controls from dirt and moisture. Ideal when the original panel is cracked, scratched, or warped. What it does

• Replaces damaged or worn control panel trim to restore appearance and protect underlying electronics
• Provides a sealed surface that helps prevent dirt and moisture from reaching buttons and switches
• Keeps control labels and button openings aligned for proper user operation
• Useful when panel cracking, chipping, loose fit, or cosmetic damage affects the front of the unit

• One facia panel (single trim piece)

• Disconnect power to the appliance before starting any repair
• Remove outer door/console trim or control assembly per service instructions to access mounting screws
• Keep track of small fasteners and any clips during removal and reassembly

This is a single replacement mounting screw used to secure panels, trim, or components on compatible appliances. It restores proper fit and prevents parts from coming loose or vibrating during operation. What it does

• Secures panels, brackets, or components in place to maintain appliance alignment
• Stops rattling or vibration caused by loose fasteners
• Helps ensure switches, doors, or trims stay properly seated
• Replaces missing or stripped screws to restore original fit

• One replacement screw

• Use the correct driver and size; start threads by hand to avoid cross-threading
• Tighten securely but avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow appliance safety precautions when accessing internal parts

This lock clamp secures the appliance door latch assembly so the door closes and seals reliably. It replaces a worn or broken clamp to restore proper latch engagement and help prevent door misalignment or failure to stay closed. What it does

• Holds the door latch or interlock assembly in position so the door can securely close
• Helps restore normal door engagement when a loose or damaged clamp causes the door to sag or not latch
• Commonly replaced when the door makes noise, feels loose, or the latch does not align
• Works with the latch housing and nearby mounting hardware to keep the lock mechanism stable

• One lock clamp (single clamp only)

• High-level replacement: usually accessed from the door or control area; remove power before servicing
• Inspect adjacent latch, springs, and mounting screws and replace any damaged parts
• Tighten fasteners to secure the clamp without overtightening or deforming plastic parts

The Detergent Dispenser is an OEM replacement part for Bosch dishwashers. It is located inside the dishwasher and is responsible for properly delivering detergent at the appropriate time during wash cycles. The detergent dispenser has a compartment that holds detergent tablets or pods, and a mechanism that releases the correct amount to efficiently clean dishes.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad detergent dispenser include:

• Detergent not dispensing or residue left in the dispenser
• Dirty dishes due to insufficient or improper detergent delivery
• Corrosion or buildup inside the dispenser area
• Dispenser door or cover cracked or damaged

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.