Shs63vl5uc Parts

This is a replacement screw used to secure panels, trim pieces, and small brackets on compatible Bosch appliances — a simple hardware fix that restores proper fit and stops rattling or loose parts. What it does:

• Fastens outer panels, control bezels, or internal brackets to the appliance chassis
• Keeps panels aligned so doors and controls fit and operate correctly
• Stops vibration noise caused by loose or missing fasteners
• Replaces damaged, stripped, or corroded screws

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand to start, then snug; avoid over-tightening which can strip threads or crack panels
• If threads are damaged, replace the mating nut or threaded insert per OEM guidance

This lock clamp secures the appliance door latch assembly so the door closes and seals reliably. It replaces a worn or broken clamp to restore proper latch engagement and help prevent door misalignment or failure to stay closed. What it does

• Holds the door latch or interlock assembly in position so the door can securely close
• Helps restore normal door engagement when a loose or damaged clamp causes the door to sag or not latch
• Commonly replaced when the door makes noise, feels loose, or the latch does not align
• Works with the latch housing and nearby mounting hardware to keep the lock mechanism stable

• One lock clamp (single clamp only)

• High-level replacement: usually accessed from the door or control area; remove power before servicing
• Inspect adjacent latch, springs, and mounting screws and replace any damaged parts
• Tighten fasteners to secure the clamp without overtightening or deforming plastic parts

The Dishwasher Water Inlet Valve is an OEM part for Bosch dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle.  

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This Bosch Dishwasher Panel-Facia is an OEM part for specific Bosch dishwasher models, ensuring an exact fit and optimal performance. The panel facia is a crucial front component of the dishwasher, featuring the control interface for selecting and managing the wash cycles.

A panel facia can become faulty due to prolonged exposure to moisture, frequent use, or accidental impacts. Other factors like electrical issues or wear of the physical buttons and displays can also contribute to its deterioration.

Symptoms of a bad Bosch Dishwasher Panel-Facia include:

• Difficulty in operating the controls or selecting wash cycles.
• Unresponsive or stuck buttons.
• Faded or malfunctioning indicator lights or displays.
• Physical damage like cracks or discoloration.
• The dishwasher not responding correctly to command inputs.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This stress relief is a small strain-relief clip that protects wiring where the harness passes through the cabinet, reducing pull and chafing on connections. Replacing a worn clip helps prevent loose wires and intermittent electrical issues. What it does:

• Secures the appliance wiring at an entry point to reduce strain on terminals and connectors.
• Prevents chafing and abrasion of wire insulation where harnesses pass through the cabinet or mounting openings.
• Can reduce symptoms such as intermittent power, flickering controls, or visible loose/frayed wires at the harness.
• Simple mechanical part: no electrical function but critical for long-term wiring reliability.

• Disconnect power (unplug appliance or switch off breaker) before accessing wiring; turn off gas supply where applicable.
• Remove panels as needed to access the harness entry; seat the clip fully so wires are routed through the relief, not pinched.
• Inspect surrounding wiring and replace any frayed or damaged wires; do not use the clip to conceal damaged wiring.

This is a package of 4 wheels.

The lower wheel kit is an OEM part for Bosch dishwashers. This lower wheel kit is designed to smoothly guide dishes in and out of the dishwasher.

Causes of a bad wheel can include wear and tear over time, cracks or breaks in the rollers, misalignment preventing proper motion, or material degradation allowing for stickiness or gumming.

Symptoms of a bad wheel include:

• Dishes not fully entering or exiting the wash chamber
• Scratches or damage to dishware
• Noisy operation of the wheel assembly
• Racks getting stuck

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Handle is an OEM part for Bosch dishwashers. It provides the surface for securely grasping and maneuvering the dishwasher door during opening and closing. 

Causes of a bad handle can include wear and tear from ongoing grasping motions. Repeated lifting and adjusting of the door places stress on handle components over time.

Symptoms of a bad handle include:

• Looseness, wobbling or detachment from the door assembly
• Sharp edges, cracks or splits compromising a firm grip
• Reduced ability to precisely guide the door into position

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Pump Housing is an OEM part for Bosch dishwashers. It houses the circulating pump and motor assembly that circulates water throughout the dishwasher during all wash cycles. Located inside the dishwasher's sump, the pump housing plays a key role in water recirculation, pick-up, and distribution of water to spray arms for optimal cleaning performance.

Symptoms of a defective pump housing include: 

• Incomplete or weak water spray from arms
• Gaps in wash or rinse coverage 
• Soap residue or buildup clinging to dishes
• Sounds of grinding, rubbing, or vibration from the pump area

Causes of pump housing issues are often external damage or cracks incurred from impact or hard water mineral scale deposits built up over time. Replacing with this OEM housing restores peak water circulation for sparkling dishes.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This facia panel is the exterior trim that covers and protects the appliance control area, restoring a finished look and shielding buttons and electronics from spills and wear. It fits into the control opening and provides the visible surface users touch. What it does:

• Covers and protects the control/buttons area from spills, grease, and daily wear
• Restores the appliance's finished front appearance after damage or removal
• Keeps underlying electronic components and switches shielded from debris
• Provides the correct mounting surface for control buttons and overlays

• Disconnect power to the appliance before attempting removal or installation
• Installation typically requires removal of trim or access panels and careful alignment of clips or screws
• Use a non-marring tool to avoid scratching the finish; do not force fasteners
• Verify button alignment and function before restoring power

This replacement control panel facia is the front trim that covers and protects the dishwasher's control area while providing the finished appearance of the door. It restores the look and provides a clean surface for the control buttons. What it does:

• Replaces a cracked, faded, or dented front control facia to restore the door's appearance
• Protects the underlying control components from spills and daily wear
• Aligns with control buttons and openings so controls remain accessible and visible
• Helps maintain a uniform finish across the dishwasher front

• One control panel facia (front trim) as shown

• High-level replacement: door panel removal or partial disassembly is usually required; follow the appliance's service manual
• Disconnect power to the appliance before beginning any repair to avoid shock
• Handle carefully to avoid scratching the finish; use proper fasteners and alignment when reinstalling