Shx4at75uc Parts

This dishwasher cup shelf mounts to the upper rack to hold cups, mugs, stemware, and small items securely. Replace a broken or missing shelf to keep items upright and organized throughout the wash cycle.

• Provides a platform on the upper rack for cups, mugs, stemware, and small items
• Helps keep items upright and reduces movement during wash and rinse
• Restores proper loading when the original shelf is cracked, loose, or missing
• Common signs: broken mounting tabs, shelf won't stay in place, cups tipping over

• Unload the upper rack; removing the rack can make access easier
• Align the shelf's mounting tabs with the rack wires and snap firmly into place
• Confirm the shelf moves freely and does not interfere with the spray arm
• Test with a light load to ensure secure placement before full use

This push button set replaces worn or broken control-panel buttons so you can restore button function and appearance on the appliance. Simple, direct replacement for damaged or stuck push-style control buttons. What it does:

• Replaces damaged, cracked, or missing push-style control buttons
• Restores tactile response for panel controls that feel stuck or unresponsive
• Improves appearance of a faded or worn control surface
• Helps recover normal user input when original buttons no longer actuate properly

• One push button set

• Disconnect power to the appliance before starting any repair
• Remove the control panel trim or access panel to reach the button assembly
• Replace buttons carefully; avoid pulling on wiring or the control board
• Reassemble panels and test button operation before finishing

This replacement seal forms a tight barrier to help prevent leaks and maintain normal appliance operation. It restores the sealed connection between mating components so the appliance can contain water or air as designed. What it does:

• Creates a watertight/airtight seal between mating parts to help prevent leaks
• Helps stop water pooling, dripping, or unexpected moisture near the appliance
• Restores proper fit where worn or damaged seals allow loss of pressure or fluid
• Supports stable operation by maintaining the intended interface between components

• Disconnect power and water supply before starting any repair
• Remove the old seal and clean mating surfaces of debris and residue before installing the new seal
• Align the seal carefully and seat fully to avoid pinching or gaps

This is a single replacement mounting screw used to secure panels, trim, or components on compatible appliances. It restores proper fit and prevents parts from coming loose or vibrating during operation. What it does

• Secures panels, brackets, or components in place to maintain appliance alignment
• Stops rattling or vibration caused by loose fasteners
• Helps ensure switches, doors, or trims stay properly seated
• Replaces missing or stripped screws to restore original fit

• One replacement screw

• Use the correct driver and size; start threads by hand to avoid cross-threading
• Tighten securely but avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow appliance safety precautions when accessing internal parts

The Dishwasher Handle End Cap is an OEM part for Bosch dishwashers. This part provides a finishing touch to the dishwasher's door handle, covering the ends for a smooth, finished appearance. Over time, these end caps can become lost, damaged, or worn, affecting the overall look and use of the dishwasher.

Symptoms of a bad Dishwasher Handle End Cap include:

• Missing or loose end caps
• Visible damage or wear 
• Diffiuculty opening the door

Causes of a bad handle end cap can range from accidental damage during cleaning or use, to natural wear and tear from repeated handling. 

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

This stress relief is a small strain-relief clip that protects wiring where the harness passes through the cabinet, reducing pull and chafing on connections. Replacing a worn clip helps prevent loose wires and intermittent electrical issues. What it does:

• Secures the appliance wiring at an entry point to reduce strain on terminals and connectors.
• Prevents chafing and abrasion of wire insulation where harnesses pass through the cabinet or mounting openings.
• Can reduce symptoms such as intermittent power, flickering controls, or visible loose/frayed wires at the harness.
• Simple mechanical part: no electrical function but critical for long-term wiring reliability.

• Disconnect power (unplug appliance or switch off breaker) before accessing wiring; turn off gas supply where applicable.
• Remove panels as needed to access the harness entry; seat the clip fully so wires are routed through the relief, not pinched.
• Inspect surrounding wiring and replace any frayed or damaged wires; do not use the clip to conceal damaged wiring.

This electronic control unit is the main circuit board that manages appliance functions and user controls, restoring proper cycle selection and electronic command response when the original board fails. What it does:

• Processes user inputs and controls cycle timing, motors, valves, and sensors
• Replaces a failed or unresponsive control board causing buttons or display to stop working
• Can resolve cycles that won't start, stop mid-cycle, or show electronic error codes
• Restores normal communication between control electronics and appliance components

• One control unit / electronic control board

• Disconnect power (unplug or switch off breaker) before servicing to avoid shock
• Handle the board carefully; avoid touching contacts and use ESD precautions if available
• Replacement usually requires removing control panel or top cover and unplugging connectors

This adjusting device helps align and fine-tune moving parts so doors and components operate smoothly. It's a direct-fit replacement designed to restore proper adjustment and reliable positioning for compatible Bosch appliances. What it does:

• Provides precise adjustment of movable assemblies to correct alignment issues
• Helps reduce binding, rubbing, or uneven gaps at doors or panels
• Restores intended movement and positioning for better operation
• Works as the factory replacement part specified for alignment tasks

• One adjusting device

• Designed for direct replacement; use the appliance's service instructions or OEM guide for correct placement
• Turn off power to the appliance before servicing to avoid injury
• Keep fasteners and mounting orientation the same as the original part during installation

This support is a replacement mounting bracket that helps secure and stabilize internal appliance components for proper alignment and operation. Replacing a worn or broken support restores fit and reduces movement-related noise or malfunctions. What it does

• Holds internal components or assemblies in their correct position to prevent shifting during operation
• Restores proper alignment that can affect door fit, drawer travel, or rotating parts
• Reduces vibration and rattling caused by a loose or damaged support
• Suitable when the original support is cracked, bent, or missing

• One support as shown

• Disconnect power and, if applicable, water supply before beginning any repair
• Remove surrounding panels or assemblies as needed to access the support; keep fasteners for reassembly
• Inspect adjacent clips, screws, and mounting points; replace any damaged hardware

This facia panel is the front console trim that covers and protects the appliance control area, restoring the unit's appearance and providing a clean mounting surface for the control assembly. Ideal for replacing cracked, chipped, or damaged front trim. What it does:

• Covers the control console and provides the visible front surface for the appliance
• Protects internal control components from everyday wear and cosmetic damage
• Restores a flush, finished appearance when the original panel is cracked, warped, or broken
• Helps keep buttons and display properly mounted and aligned

• Always disconnect power to the appliance before starting repair
• Installation typically requires removing the outer door or console trim and securing the panel with existing screws/clips
• Keep original fasteners; replace any stripped screws with correct-size hardware