Shx5al05uc/04 Parts

Finish the sides of your dishwasher cutout. These white side trim strips cover the left and right edges for a clean, factory look and help replace cracked, yellowed, or missing trims that leave gaps beside the appliance.

• Finishes and protects the exposed side edges of the dishwasher opening
• Conceals small gaps between the appliance and adjacent cabinetry
• Restores appearance when trims are cracked, warped, discolored, or missing
• Helps keep the unit seated neatly in the cabinet cutout

• Disconnect power at the breaker and shut off water supply before servicing a built-in dishwasher
• Remove existing trims and clean the mounting surfaces of any residue
• Align the new left/right strips correctly; dry-fit to confirm orientation and length
• Secure per your model's service instructions; verify door clearance and alignment before pushing the unit fully back

The Hinge Lever (RH) is an OEM component specifically designed for Bosch dishwashers. This right-hand lever is a part of the dishwasher door hinge assembly, working to open and close the door during each use. 

Causes of a bad hinge lever can include wear and fatigue over thousands of opening and closing cycles. Damage can also potentially occur from any impact or denting of the door surface near the lever mechanism.

Symptoms of an ineffective hinge lever include:

• The dishwasher door sagging or becoming misaligned  
• Difficulty fully opening or closing the door
• Loud squeaks or grinding noises coming from the hinges
• The door potentially detach from the hinge if broken 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.

The Cover is an OEM part for Bosch dishwashers. Designed to securely seal the sump area, this part prevents leaks and ensures that water is properly circulated and drained during the dishwashing cycle. 

Causes of failure might include physical damage such as cracks or warping, which can compromise the seal, or the buildup of debris that prevents proper seating of the cover. 

Symptoms of a failing Cover include:

• Water leaks from the bottom of the dishwasher
• Poor washing performance due to inadequate water circulation
• Unusual noises as the pump struggles to draw or expel water
• Visible damage or warping of the cover itself

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Wire Harness is an OEM component specifically designed for select Bosch dishwashers requiring electrical connections between moving components. It facilitates signal and current pathways throughout appliance frames.

Reinforced flexing sections bend without kinks accommodating shifting door movements. While connector joints remain snug against jostling. This daisy chain design simplifies diagnostics and maintenance procedures compared to individual wiring. 

Symptoms signaling the need for a new harness include:

• Intermittent cycle malfunctions indicating loose or corroded connections  
• Broken or cracked housing exposing live conductors to shorting hazards
• Overly taut sections hindering the intended range of component motions

Causes relate to prolonged abrasion stresses and water damage compromising insulation throughout thousands of cycles. Physical damage during repairs may require a complete replacement of this integral wiring backbone.

This OEM Bosch replacement harness is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers relying on consistent control schemes. Reinstallation restores reliable electrical pathways.
 

The Hinge Lever (LH) is an OEM part for Bosch dishwashers. This left-hand lever is responsible for assisting in the opening and closing of the dishwasher door through a pivoting motion. The hinge lever works with other door components like springs and cables to provide smooth, balanced movement of the door. 

Symptoms of a bad Hinge Lever include: 

• Difficulty opening or closing the dishwasher door  
• The door not staying securely closed during the cycle
• Excessive noise or creaking coming from the door area
• Misalignment of the door 

Causes of a bad Hinge Lever can include normal wear and tear over time, damage from excessive force or weight on the door, or loose mounting hardware.

Note: Left hinge lever

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The Drain Hose Adapter is an OEM component specifically designed for Bosch dishwashers. Securely attaching to the unit base, it provides the interface between the internal drain pump hose and your household plumbing. Precise sizing facilitates complete drainage.

Symptoms of a bad drain hose adapter include leaks allowing water backflow or improper drainage. Mineral buildup risks impeding water evacuation over time as well.

Causes of a bad drain hose adapter involve normal wear reducing a tight seal. Exposure to chemical or heat impacts posing warping presents replacement needs to restore function. 

Causes of a bad drain hose adapter include:

• Puddles of water remain after cycles instead of fully draining
• Mold or mildew growth forms from moisture trapped inside 
• The drain hose slides off during pumping due to a loose interface fit

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. 
 

The Junction Box Cover is an OEM part for Bosch dishwashers. Located at the rear of the appliance, the junction box houses connections to the power supply and control board wiring. The junction box cover protects these internal electronic parts.

Symptoms of a bad junction box cover can include:

• Cracks, breaks or missing pieces of the plastic casing
• Exposed wires posing risk of electric shock
• Difficulties accessing internal components for service or repairs
• Potential water damage into electrical components

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Handle Cap is an OEM component specifically designed for Bosch dishwashers. Located at the top of the dishwasher door, the handle cap is an important design element that protects the handle mechanism from impact and damage.

Symptoms of a bad handle cap include: 

• Cracks or breaks in the plastic material
• Loose fit that causes rattling noises
• Exposed internal handle components 

Causes of a bad handle cap are typically wear and tear over time from repeated opening and closing of the dishwasher door. Impacts or improper handling can also damage the cap.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The Spray Arm is an OEM replacement part for Bosch dishwashers. Stationed inside the wash cabinet, it evenly distributes water and cleaning chemicals across dishes. The spray arm utilizes multiple horizontal and vertical jets to reach all surfaces of every load.

Causes of a faulty spray arm typically involve clogged or misdirected nozzles after extended use. Mineral deposits may disrupt water pressure or restrict openings in the rotating assembly.

Symptoms of a bad spray arm include: 

• Incomplete cleaning requiring pre-rinsing of dishes
• standing water or pooling detergent inside the washer
• Dried or stuck-on residue remaining in hard-to-reach areas  
• Dishes coming out still soiled despite cleaning attempts

Replacing your spray arm restores thorough coverage and superior wash performance. This genuine Bosch part ensures all dish surfaces receive optimum cleaning from every angle. Compatible with Thermador, Gaggenau, and select Kenmore models.

The Detergent Dispenser Seal is an OEM part for Bosch dishwashers. Located inside the detergent dispenser compartment, it creates a water-tight barrier, preventing premature detergent dissolution and leaks. Working seamlessly with the dispenser system, the seal facilitates controlled detergent release for optimum cleaning performance cycle after cycle. 

Causes for a bad detergent dispenser seal can include wear and tear from repeated use, deformations due to temperature fluctuations, and cracks or splits from general use.  

Symptoms of a bad detergent dispenser seal include:

• Detergent residue or puddles inside the dishwasher  
• Premature detergent dissolution before the main wash
• Leaks or drips from the dispenser area when closed
• Ineffective or inconsistent cleaning ability

This genuine Bosch detergent dispenser seal replacement will restore its water-tight barrier. It is also compatible with some Thermador, Siemens, and select Kenmore models.

The Leveling Leg is an OEM replacement part for Bosch dishwashers. It permits adjustment to compensate for uneven floor surfaces, leveling the dishwasher, and ensuring proper drainage. Precise leveling facilitates water collection and effective cleaning performance. 

Symptoms of a bad leveling leg can include broken or stripped threads preventing adjustment, and conditions that promote rocking during operation. 

Causes of a bad leveling leg include:

• Loose or unstable mounting where legs spin freely  
• Legs unable to securely lock into position once adjusted   
• Drainage issues such as standing water or poor rinsing
• Excessive vibration or noise heard from the leveling area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.

• Fastens components to the appliance frame or assemblies
• Replaces a missing, stripped, or rusted original screw
• Helps reduce rattling or vibration from loose hardware
• Restores proper alignment of panels or brackets

• Disconnect power and shut off water before servicing
• Refer to your model's parts diagram to locate and place
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening

The Mounting Bracket is an OEM component specifically designed for Bosch dishwashers. Rigid and durable, it securely anchors dishwashers to surrounding countertops and cabinetry during installation and use. Correct positioning by brackets streamlines plumbing and electrical connections.

Symptoms of a faulty mounting bracket can include shifts in the dishwasher's installed position or coming loose over time. Cracks or breaks inhibiting secure attachment necessitate replacement to ensure safety and compliance with installation standards.

Causes of a bad mounting bracket can involve stresses from frequent load shifting putting strain on attachment points. Impact incidents during installation introducing fracture risks also influence replacement needs to restore fully stable integration.

Symptoms of a bad mounting bracket include: 

• Movement or rocking of the dishwasher in its installed space
• Loose attachment enabling potential tripping hazards  
• Installation difficulties without the bracket in place

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. 
 

The Handle-Cap Shaped part is an OEM part for Bosch dishwashers. It makes up the cap on the end of the dishwasher door handle.

Causes of a bad handle cap can include wear and tear from ongoing opening and closing motions of the door. Repeated grasping and lifting places stress on this high-contact area.

Symptoms of a bad handle cap include:

• Exposed or sharp metal edges on the handle where the cap is missing
• Looseness, wobbling or detachment of the cap from the handle
• Reduced ability to firmly grab and maneuver the door easily

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This electronic control unit is the appliance's main circuit board, directing programs, user inputs, and power to components. Replacing a failed board restores responsive controls and consistent cycle operation when the original is damaged or malfunctioning.

• Interprets user inputs and sensor signals to run the selected program
• Controls timing and power delivery to motors, valves, heaters, and indicators
• Stores operating logic and coordinates cycle steps
• Typical failure symptoms include unresponsive controls, won't start or advance, intermittent shutdown, error codes, or flickering lights

• Disconnect power before servicing; also shut off gas
• Use ESD protection; handle the PCB by the edges to avoid static damage
• Photograph wiring and move connectors one at a time; secure seating
• Location and setup vary by model; for any required programming or calibration

This sump screw secures the dishwasher's sump or sump cover to the tub, keeping the assembly tight and leak-resistant. Replace a missing, stripped, or damaged screw to restore a proper seal and stable mounting.

• Fastens the sump or sump cover to the dishwasher tub
• Helps maintain a watertight seal to reduce leaks
• Keeps filter/sump components aligned and secure
• Replaces missing, stripped, or damaged hardware
• Helps address leaks or rattling around the sump area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack and filters to access the sump area
• Ensure mating surfaces and seals are clean and properly seated
• Tighten snugly by hand; do not overtighten to avoid stripping