Shx68t52uc/09 Parts

This insulating protection strip shields wiring and nearby components from heat and abrasion, helping maintain safe operation and prevent premature wear. It's a low-profile, heat-resistant sleeve used where wiring passes near hot appliance parts. What it does:

• Provides thermal and abrasion protection for wiring and small components
• Helps prevent shorting or insulation damage from heat exposure
• Reduces wear where wires contact sharp edges or moving parts
• Commonly used when replacing control or harness components near heat sources

• One insulating protection strip/sleeve as shown

• Only install with power disconnected and appliance fully cooled
• Position sleeve fully over exposed wiring or component and secure per OEM routing
• Inspect surrounding wiring and connectors for damage; replace any frayed insulation

This is a replacement screw used to secure panels, trim pieces, and small brackets on compatible Bosch appliances — a simple hardware fix that restores proper fit and stops rattling or loose parts. What it does:

• Fastens outer panels, control bezels, or internal brackets to the appliance chassis
• Keeps panels aligned so doors and controls fit and operate correctly
• Stops vibration noise caused by loose or missing fasteners
• Replaces damaged, stripped, or corroded screws

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand to start, then snug; avoid over-tightening which can strip threads or crack panels
• If threads are damaged, replace the mating nut or threaded insert per OEM guidance

A replacement door hinge that restores smooth, stable door movement and proper alignment. Designed to replace the factory hinge so the appliance door opens, closes and stays aligned as intended. What it does:

• Supports and pivots the appliance door for normal opening and closing.
• Keeps the door aligned to prevent rubbing, gaps, or uneven sealing.
• Helps eliminate sagging or misaligned doors that make closing difficult.
• Works with original mounting points to maintain correct door motion.

• Use basic hand tools; for model-specific instructions.
• Disconnect power and/or gas and empty the appliance as required before servicing.
• Handle glass or insulated doors with care—use an assistant for heavy or awkward doors.

The Dishwasher Water Inlet Valve is an OEM part for Bosch dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle.  

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Insert is an OEM replacement part for Bosch dishwashers. It is located inside the wash tub and helps direct water flow during cycles.

Causes of a bad insert can include regular wear and tear, damage from heavy or improperly loaded items, or warping due to exposure to high temperatures and detergents.

Symptoms of a faulty insert include:

• Poor cleaning performance, even on heavily soiled items
• Concentrated residue in certain areas of the tub or racks
• Standing water droplets inside the tub post-cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This insert is a replacement rack insert designed to restore proper item support and organization inside the appliance. It helps keep dishes and utensils secure so they wash and dry more effectively. What it does

• Replaces a damaged or missing rack insert that no longer holds items securely
• Restores proper spacing and support to prevent shifting or tipping during cycles
• Helps reduce chipping and breakage caused by loose items
• Can improve wash coverage by keeping items in the intended position

• One rack insert as shown

• Remove power and water supply to the appliance before servicing
• Slide out the affected rack and snap or slide the insert into the matching slots; no special tools typically required
• Inspect adjacent clips and rails for wear and replace if damaged

This outer door panel replaces a damaged or dented front panel to restore the dishwasher's appearance and protect internal components. It provides the external surface that you see and touch when loading and unloading dishes. What it does:

• Replaces the dishwasher's front outer door panel for cosmetic and protective repair
• Restores a smooth, secure surface where the control bezel and handle attach
• Helps stop drafts, moisture intrusion, and visible dents or scratches on the front
• Commonly used when the exterior is dented, scratched, or warped and needs renewal

• Remove power and water supply to the appliance before starting any repair
• Keep screws and fasteners organized; transfer existing hardware
• Inspect inner door components and insulation while door is open; replace damaged clips or seals as needed