Shx68tl5uc-02 Parts

The Dishwasher Water Inlet Valve is an OEM part for Bosch dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle.  

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Dishwasher Handle End Cap is an OEM part for Bosch dishwashers. This part provides a finishing touch to the dishwasher's door handle, covering the ends for a smooth, finished appearance. Over time, these end caps can become lost, damaged, or worn, affecting the overall look and use of the dishwasher.

Symptoms of a bad Dishwasher Handle End Cap include:

• Missing or loose end caps
• Visible damage or wear 
• Diffiuculty opening the door

Causes of a bad handle end cap can range from accidental damage during cleaning or use, to natural wear and tear from repeated handling. 

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Insert is an OEM replacement part for Bosch dishwashers. It is located inside the wash tub and helps direct water flow during cycles.

Causes of a bad insert can include regular wear and tear, damage from heavy or improperly loaded items, or warping due to exposure to high temperatures and detergents.

Symptoms of a faulty insert include:

• Poor cleaning performance, even on heavily soiled items
• Concentrated residue in certain areas of the tub or racks
• Standing water droplets inside the tub post-cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Frame is an OEM part for Bosch dishwashers that provides support and organization for your cutlery, offering a designated space for your forks, knives, spoons, and other utensils. 

A bad frame can occur due to wear and tear, accidental damage, or exposure to harsh chemicals. Signs of a faulty frame include cracks, broken sections, or difficulty in smoothly sliding the drawer in and out.

Symptoms of a bad frame include:

• Cracks or broken sections in the frame 
• Difficulty in sliding the cutlery drawer in and out
• Unorganized or unstable storage of cutlery 

Replace your damaged or worn-out frame with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This insert is a replacement rack insert designed to restore proper item support and organization inside the appliance. It helps keep dishes and utensils secure so they wash and dry more effectively. What it does

• Replaces a damaged or missing rack insert that no longer holds items securely
• Restores proper spacing and support to prevent shifting or tipping during cycles
• Helps reduce chipping and breakage caused by loose items
• Can improve wash coverage by keeping items in the intended position

• One rack insert as shown

• Remove power and water supply to the appliance before servicing
• Slide out the affected rack and snap or slide the insert into the matching slots; no special tools typically required
• Inspect adjacent clips and rails for wear and replace if damaged

This installation kit provides the mounting hardware needed to secure compatible appliances during installation, helping ensure a stable, professional fit. It's a straightforward replacement for worn or missing installation components. What it does:

• Supplies the mounting brackets, screws, and related fasteners required for appliance installation
• Helps secure the appliance in cabinetry or framing to prevent shifting or vibration
• Replaces missing or damaged hardware to restore safe, stable installation
• Addresses common installation issues like loose trim or unstable mounting

• Follow the appliance manufacturer's installation instructions and local codes
• Turn off power and water before beginning work
• Use appropriate tools and hardware for secure mounting; tighten fasteners to manufacturer specs

The Adjustable Tine Row is an OEM part for Bosch dishwashers. It is designed to hold and secure dishes, allowing for optimal placement and cleaning efficiency. The adjustable feature allows users to customize the spacing of the tines to accommodate various dish sizes and shapes.

Over time, the adjustable tine row can become damaged or worn out due to repeated use or excessive force when adjusting the tines. This can lead to difficulties in securing dishes properly and may impact the overall performance of the dishwasher.

Symptoms of a bad adjustable tine row include:

• Tines that are bent or broken
• Difficulty in adjusting the tine positions
• Dishes not staying in place during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Insert is an OEM component for Bosch dishwashers. It is an track piece designed to securely hold tall items in the lower rack. Made of plastic reinforced with ribs, the insert provides additional organizational support to accommodate larger kitchenware below without tipping or sliding.

Causes of a bad insert can include cracks developing from repeated loading/unloading of rack contents or chunks missing from impact damage over time.

Symptoms of a bad insert include:

• Pots and pans failing to stably rest in the lower rack
• Items shifting or tipping during agitated cycles
• Gaps appear where kitchenware can fall through
• Obstructions inhibiting smooth rack gliding motions

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Dishrack Roller is an OEM replacement part for Bosch dishwashers. Located inside the tub, this roller assists with moving upper and lower dishracks in and out during operation. 

Causes of failure are prolonged exposure to detergent residues combined with repeated rolling impact stresses absorbing dishrack weight for tens of thousands of cycles.

Symptoms of a worn or damaged dishrack roller include:  

• Difficulty fully extending or retracting dishrack shelves  
• Rack skew or tilting sideways instead of moving smoothly
• Grinding or scraping noises heard from the tub area  
• Dishes not lining up properly to receive spray patterns

This genuine Bosch roller is also compatible with Thermador and Gaggenau models.