Shx6apo2uc/05 Parts

This mounting bracket secures internal components to the appliance cabinet, helping keep parts aligned and stable during operation. It's a direct-fit replacement designed to restore proper support and reduce rattling or misalignment. What it does:

• Provides a secure mounting point for internal assemblies to prevent movement
• Helps stop rattling, vibration noise, and loose parts during cycles
• Restores proper alignment for connected components that rely on firm support
• Prevents wear caused by parts shifting against each other

• One mounting bracket

• Install with the factory fasteners and torque to the manufacturer's specification when available
• Turn off power and disconnect the appliance before starting work
• Verify correct bracket orientation against the service diagram before tightening
• Replace damaged or worn components as recommended to ensure proper fit and function

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This lock clamp is a small retaining clip that secures a component or connection inside the appliance. It keeps parts firmly seated and aligned to help prevent loosening, misalignment, or accidental disconnection during normal operation.

• Locks and retains the associated fitting or component in place
• Maintains a secure, correctly aligned connection
• Helps resist vibration-related movement during use
• If worn, broken, or missing, you may notice a loose connection, rattling, parts separating, or leaks at the joint

• Disconnect power; shut off water supply if the repair involves a water path
• Note the clip's orientation/position before removal (take a quick photo for reference)
• Use needle-nose pliers or a small flat-blade tool to release/install; avoid over-bending
• The component is fully seated and the clip is fully engaged before reassembly

This spring-style hose clamp secures flexible appliance hoses to fittings, helping prevent leaks and loose connections. It's a small but critical fastener that keeps water and drain hoses sealed under normal operation. What it does:

• Holds a rubber or plastic hose firmly onto a barb or spigot to stop leaks
• Prevents hose slippage that can cause water pooling or drip symptoms
• Maintains a compressive seal that resists vibration and thermal cycling
• Commonly used on drain, fill, and circulation hoses in dishwashers and washers

• Disconnect power and shut off water supply before starting work
• Use appropriate pliers (hose clamp or needle-nose) to expand and position the clamp
• Ensure the clamp sits evenly over the hose barb and releases fully to secure the hose
• Inspect the hose and connection for damage; replace hoses if they are cracked or excessively worn

This is a replacement push button for the appliance control panel that restores tactile operation for a worn or broken key. Installing the correct button returns a responsive, easy-to-use control surface. What it does:

• Replaces a damaged or missing control panel button so the corresponding function can be selected again
• Restores tactile feedback for reliable user input
• Helps fix symptoms such as a stuck, cracked, or non-responsive button on the control console
• Works as the external user-facing actuator — does not include internal switches

• One (1) replacement push button

• High-level replacement: remove the console or control panel trim to access the button; follow OEM disassembly steps
• Handle parts gently to avoid damaging tabs or clips; align button with its mounting posts before snapping into place
• Disconnect power to the appliance before starting work to avoid shock or accidental activation

This replacement tension spring restores proper tension in compatible appliance mechanisms, helping parts return to position and reducing sag, noise, or looseness. Use this OEM-design spring to replace a worn, stretched, or broken spring. What it does

• Provides restorative tension for hinges, latches, or small moving assemblies
• Helps a door, panel, or linkage return to its resting position
• Reduces rattling or looseness caused by a weakened spring
• Restores proper alignment and consistent movement where a spring is required

• One replacement tension spring (1 pc)

• Compare the new spring to the old spring for length, hook style, and orientation before installing
• Disconnect power and follow your appliance manual's safety steps before working on moving parts
• Use appropriate hand tools and caution — springs can release force suddenly

This replacement seal forms a tight barrier to help prevent leaks and maintain normal appliance operation. It restores the sealed connection between mating components so the appliance can contain water or air as designed. What it does:

• Creates a watertight/airtight seal between mating parts to help prevent leaks
• Helps stop water pooling, dripping, or unexpected moisture near the appliance
• Restores proper fit where worn or damaged seals allow loss of pressure or fluid
• Supports stable operation by maintaining the intended interface between components

• Disconnect power and water supply before starting any repair
• Remove the old seal and clean mating surfaces of debris and residue before installing the new seal
• Align the seal carefully and seat fully to avoid pinching or gaps

This is a replacement push button for Bosch appliance control panels. It restores a missing, broken, or unresponsive button so you can select cycles and settings with a secure, tactile feel. What it does:

• Acts as the user-facing pushpiece that engages the underlying control switch
• Restores reliable button travel and tactile feedback when original button is cracked, stuck, or missing
• Helps resolve symptoms like buttons that won't depress, intermittent or no response from a control, or visible button damage
• Replaces cosmetically worn or discolored buttons to improve panel appearance

• Disconnect power (unplug or turn off breaker) before servicing the appliance
• Replacement typically snaps into the front control panel; panel removal may be required for access
• Handle gently and avoid forcing parts; ensure proper orientation before snapping into place

This is a single replacement mounting screw used to secure panels, trim, or components on compatible appliances. It restores proper fit and prevents parts from coming loose or vibrating during operation. What it does

• Secures panels, brackets, or components in place to maintain appliance alignment
• Stops rattling or vibration caused by loose fasteners
• Helps ensure switches, doors, or trims stay properly seated
• Replaces missing or stripped screws to restore original fit

• One replacement screw

• Use the correct driver and size; start threads by hand to avoid cross-threading
• Tighten securely but avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow appliance safety precautions when accessing internal parts

This is a replacement control panel push button that restores a responsive, easy-to-press control on your appliance. It replaces a cracked, stuck, or missing button so you can select cycles and settings reliably. What it does:

• Acts as the user-facing push input for the appliance control panel
• Restores tactile feedback for selecting cycles, options, or start functions
• Commonly used when a button is cracked, stuck, or no longer registers presses
• Works with the existing switch assembly and bezel when installed correctly

• Disconnect power to the appliance before starting any repair.
• Access typically requires removing the control panel or trim; keep screws and small parts organized.
• Remove the old button by gently unfastening from the panel; press the new button into place until it snaps securely.

This stress relief is a small strain-relief clip that protects wiring where the harness passes through the cabinet, reducing pull and chafing on connections. Replacing a worn clip helps prevent loose wires and intermittent electrical issues. What it does:

• Secures the appliance wiring at an entry point to reduce strain on terminals and connectors.
• Prevents chafing and abrasion of wire insulation where harnesses pass through the cabinet or mounting openings.
• Can reduce symptoms such as intermittent power, flickering controls, or visible loose/frayed wires at the harness.
• Simple mechanical part: no electrical function but critical for long-term wiring reliability.

• Disconnect power (unplug appliance or switch off breaker) before accessing wiring; turn off gas supply where applicable.
• Remove panels as needed to access the harness entry; seat the clip fully so wires are routed through the relief, not pinched.
• Inspect surrounding wiring and replace any frayed or damaged wires; do not use the clip to conceal damaged wiring.

This replacement door handle restores a secure, comfortable grip for opening and closing the appliance door and refreshes the unit's appearance. Designed to match OEM fit and finish for a clean, factory look. What it does:

• Provides a sturdy grip for opening and closing the appliance door.
• Replaces cracked, loose, or broken handles that make the door hard to operate.
• Helps maintain proper door alignment and user control when opening or closing.
• Restores the appliance's finished appearance where the original handle is damaged.

• Disconnect power to the appliance before beginning any repair and follow all safety precautions.
• Installation may require removing the door trim or access panel and common hand tools (screwdriver, socket); your appliance manual for exact steps.
• Retain original fasteners; this part listing does not guarantee included hardware.

This black replacement door handle restores a dishwasher's exterior grip and appearance, letting the door open and close securely. It matches factory fit and finish for compatible Bosch dishwasher models. What it does:

• Replaces a cracked, broken or missing door handle to restore normal door opening
• Provides a solid grip for pulling the dishwasher door open and closed
• Restores the appliance's exterior appearance when the original handle is damaged
• Fits the factory handle mounting locations and aligns with the door trim

• One black door handle

• Disconnect power to the dishwasher before starting any repair
• Support the door while removing fasteners to prevent it from closing unexpectedly
• Remove interior door panel or trim as required to access handle screws or clips
• Use manufacturer service manual or OEM instructions for step-by-step removal and reassembly