Shx84aaf5n Parts

A direct-replacement display module for the appliance control panel that restores readable status indicators and touch/button feedback so you can use cycle selections and view error information clearly. What it does:

• Shows cycle status, time remaining and error codes on the control panel display
• Relays user input from touchpads/buttons to the main control board
• Fixes symptoms like a blank or flickering display, unresponsive controls, or missing status lights
• Works as the user interface portion of the control assembly for normal operation

• One display module

• Disconnect power to the appliance before beginning any repair
• Handle ribbon cables and connectors gently; ensure secure, fully seated connections
• Remove the outer control panel to access the module—retain screws and trim pieces
• Test the main control board and wiring harness for faults

This holder secures a specific component or cover in your appliance, keeping it properly positioned during use. Replacing a cracked or missing holder restores correct fit, reduces rattling, and helps prevent premature wear on adjacent parts.

• Positions and supports the designated component or cover for stable operation
• Helps maintain alignment to minimize vibration or noise
• Common symptoms: broken or missing clip/ear, loose or shifting part, rattling, or a part that won't stay attached
• Direct-fit replacement to match the original holder on applicable models

• Disconnect power; shut off water or gas
• Note the orientation of the original holder and transfer any screws or fasteners
• Handle plastic tabs gently; do not overtighten fasteners
• Verify secure fit and proper operation before reassembly

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This replacement door handle restores a secure grip and proper operation to your appliance door. It provides a direct, OEM-matching fit and helps the door open and close smoothly when the original handle is cracked, loose, or broken. What it does:

• Replaces a damaged, cracked, or broken door handle to restore safe opening and closing
• Provides a firm grip and correct clearance for door operation
• Prevents further damage from using a compromised handle
• Matches original mounting points for straightforward replacement when correct part is used

• Turn off power to the appliance (or unplug) before starting any repair
• Inspect mounting screws and trim; reuse only undamaged hardware or replace as needed
• Typical installation requires removing door trim or inner panel—follow your model's service instructions

This insert is a replacement rack insert designed to restore proper item support and organization inside the appliance. It helps keep dishes and utensils secure so they wash and dry more effectively. What it does

• Replaces a damaged or missing rack insert that no longer holds items securely
• Restores proper spacing and support to prevent shifting or tipping during cycles
• Helps reduce chipping and breakage caused by loose items
• Can improve wash coverage by keeping items in the intended position

• One rack insert as shown

• Remove power and water supply to the appliance before servicing
• Slide out the affected rack and snap or slide the insert into the matching slots; no special tools typically required
• Inspect adjacent clips and rails for wear and replace if damaged

This ventilation duct is the in-line connector that channels exhaust air from the appliance to the house vent, helping maintain proper airflow and reduce back-drafting. Designed to fit compatible Bosch ventilation assemblies. What it does:

• Routes exhaust air from the appliance to the home vent or hood exhaust system.
• Replaces damaged, bent, or disconnected ducting that can restrict airflow.
• Helps reduce odors and heat buildup by restoring a clear exhaust pathway.
• Works as a direct replacement part where the OEM duct is specified.

• One ventilation duct/duct connector as shown.

• Turn off power to the appliance and ensure the unit is cool before servicing.
• Inspect surrounding seals and fasteners; replace any damaged clamps or gaskets separately.
• Slide or fasten the duct into place and secure with appropriate clamps; ensure a tight, unobstructed path.

This replacement cable restores an internal electrical connection between components in compatible Bosch appliances, helping fixed or intermittent power/signal issues at the affected circuit. Use it when a damaged or broken cable prevents normal operation. What it does

• Re-establishes a secure electrical link between internal modules or assemblies.
• Commonly replaced for intermittent operation, loss of function, or visible cable damage.
• Helps eliminate shorts or open circuits caused by frayed insulation, broken conductors, or loose terminations.
• Matches OEM routing and termination when used in the correct location.

• High-level task: replace the failing cable with the unit shut off and unplugged or power disconnected at the breaker.
• Observe proper routing and secure any strain reliefs or clips to prevent pinching and abrasion.
• Verify connectors are fully seated and latched; avoid forcing misaligned terminals.

This mounting bracket secures a small internal component in place to restore proper alignment and reduce movement or noise. It's a simple replacement that helps keep your appliance operating quietly and reliably. What it does

• Supports and holds an internal part or assembly in the correct position
• Stops rubbing, vibration, or rattling caused by a broken or loose bracket
• Restores normal alignment so adjacent parts can operate without interference
• Used where a small molded or stamped support is required inside the appliance

• One holder (mounting bracket) as shown

• Disconnect power and water before starting any repair
• Remove access panel(s) to reach the damaged holder; basic hand tools typically required
• Keep original fasteners; replace only if explicitly listed as included

This insulating part is a small thermal/electrical insulator used on select appliances to help prevent heat transfer and protect nearby components. It reduces heat-related wear and helps maintain safe operation around sensitive parts. What it does:

• Provides thermal insulation between hot components and adjacent parts to reduce heat transfer.
• Helps protect wiring, plastic components, and electronics from overheating.
• Can prevent heat-related noise, discoloration, or softening of nearby materials.
• Useful when replacing damaged, brittle, or missing insulation that exposes components.

• One insulating part as shown

• High-level replacement only; ensure appliance is unplugged or power is disconnected before service.
• Handle carefully to avoid contamination or damage; install in the same orientation and location as the original.
• If insulation is attached near high-temperature components, verify surrounding parts are intact and not degraded.

This cutlery drawer provides a dedicated third-rack space to organize silverware and small items for more efficient dishwasher loading and better cleaning coverage. Replaces damaged or worn drawer trays to restore proper fit and function. What it does:

• Holds flatware and small utensils in a dedicated top-rack compartment for improved organization
• Prevents items from nesting or blocking spray arms for more consistent cleaning performance
• Keeps lightweight items secured during the wash cycle to reduce movement and potential damage
• Restores proper alignment and clearance with the upper rack assembly when original drawer is cracked or warped

• One cutlery drawer assembly

• Disconnect power and water to the dishwasher before beginning any service
• Remove the dishwasher door and/or upper rack per your model's service instructions to access the drawer mounting points
• Handle plastic parts gently to avoid cracking; align slides and clips before securing

This access cover replaces a damaged or missing exterior panel to restore proper fit and protect internal components from debris and moisture. It helps maintain appliance appearance and prevents accidental contact with internal parts. What it does:

• Covers and protects internal components at the specified access point
• Helps prevent debris buildup and accidental contact with wiring or moving parts
• Restores a secure mounting surface for adjacent panels or controls
• Reduces rattles or vibration caused by a loose or broken cover

• One replacement cover (1 piece)

• Disconnect power to the appliance before beginning any work
• Installation may require basic hand tools; handle edges carefully to avoid cuts
• Align mounting tabs and fasten with the factory screws or clips; do not overtighten