Shx9er55uc/50 Parts

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This inner door panel replaces a damaged or worn dishwasher door interior to restore proper door fit and help prevent leaks and rattling. It fits behind the outer door and supports the latch and internal components. What it does

• Forms the interior surface of the dishwasher door and helps keep water inside the tub
• Supports latch, insulation, and any door-mounted components
• Restores proper door alignment and reduces noise from a loose or dented door
• Commonly replaced when the door is dented, cracked, or showing signs of water intrusion

• One inner door panel

• Disconnect power (and water, if applicable) before starting; follow all safety precautions
• Removing the outer door panel and handling any attached wiring or insulation may be required
• Handle edges and any glass with care to avoid cuts or breakage

This replacement tube connects and directs fluid or air between system components to restore proper routing and prevent leaks or malfunctions. It's a direct-fit service part when the original tube is cracked, clogged, or damaged. What it does

• Channels water or airflow between internal components to maintain normal operation.
• Restores proper routing when the original tube is cracked, split, or collapsed.
• Helps stop visible leaks or pooling under the appliance associated with a failed tube.
• Reduces risk of related component damage caused by diverted fluids.

• One replacement tube.

• Disconnect power and turn off the water supply before starting any repair.
• Verify correct orientation and seating; secure with factory clamps or hose clamps as required.
• Inspect adjacent connections and replace any worn seals or clamps to ensure a leak-free installation.
• After installation, restore power/water and run a short cycle to check for leaks.

This insert is a replacement trim piece designed to restore the appliance's finished appearance and secure adjacent panels. It helps cover gaps and keeps exterior surfaces aligned for a clean, factory look. What it does:

• Replaces a cracked, chipped, or missing trim insert that exposes panel edges
• Helps maintain proper panel alignment and prevents rubbing or catching
• Restores the original finished appearance of the dispenser/door area
• Useful when trim fastening points are intact but the visible insert is damaged

• High-level replacement: typically snaps or slides into place—no specialized tools required
• Disconnect power or follow maker safety guidance when accessing interior panels near electrical components
• Inspect surrounding clips and fasteners; replace if worn to ensure proper fit

This water softener cartridge helps reduce hard-water minerals in dishwasher cycles to limit spotting and buildup for clearer glassware and cleaner dishes. Fits into the dishwasher's water-treatment area to help maintain wash performance. What it does:

• Uses ion-exchange media to reduce hardness that causes spotting and cloudy glass
• Helps prevent mineral deposits on heating elements and interior surfaces
• Improves detergent effectiveness for better cleaning and rinsing
• Common symptom: persistent spots or white film on dishes and glasses

• High-level replacement: disconnect power and water supply before servicing
• Access requires removing the dishwasher's outer tub/top panels per service manual
• Handle cartridge and internal parts carefully to avoid damaging seals or gaskets

This temperature sensor (thermistor) measures appliance temperature and sends a signal to the control board so the unit can maintain proper cooling cycles. Replaces a failed or intermittent sensor for more reliable temperature control. What it does:

• Detects internal temperature and provides a changing resistance signal to the control board
• Helps the control board regulate compressor and fan operation for consistent cooling
• Commonly linked to symptoms like incorrect temperatures, frequent cycling, or related error codes
• Works as a direct-replacement sensing element

• One temperature sensor (thermistor) as pictured

• Disconnect power before servicing to avoid shock or damage
• Handle the sensor and wiring gently; avoid kinking or pinching the harness
• Access may require removing interior panels or covers; keep mounting hardware for reinstallation
• Test with a multimeter or follow OEM service instructions before replacement

This retaining nut secures threaded connections on compatible Bosch appliances to keep components tight and stable during operation. A small replacement that restores proper fastening and prevents parts from loosening. What it does:

• Fastens and secures mating threaded components to maintain mechanical stability
• Prevents vibration-induced loosening of attached parts
• Helps maintain proper alignment of secured components during use
• Can stop intermittent movement or rattling caused by a missing or damaged nut

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Verify correct nut location and thread engagement before tightening; do not force threads
• Tighten to snug fit—avoid overtightening which can strip threads or damage components

This replacement rail restores smooth rack movement and proper alignment in compatible dishwashers. It helps support the rack and keep rollers on track so the rack slides in and out without binding. What it does

• Supports and guides a dishwasher rack so it rolls smoothly along its track
• Helps prevent the rack from slipping off or catching while opening or closing
• Can reduce grinding or scraping noises caused by a damaged or bent rail
• Restores proper rack alignment for reliable loading and unloading

• One rail

• Turn off power to the appliance before beginning any service
• Remove the affected rack and rollers as needed to access and replace the rail
• Inspect rollers and mounting clips; replace any worn hardware to ensure proper fit

This base panel is the lower kick plate that finishes the front bottom of the appliance and helps protect internal components from debris while keeping the cabinet appearance consistent. It replaces a worn, bent, or damaged lower panel. What it does:

• Covers and protects the appliance's lower cavity and components from dust, debris and accidental contact
• Restores proper fit and appearance when the original panel is dented, cracked, or loose
• Helps reduce drafts and keeps the oven/range base sealed from the front
• Can stop rattling caused by a damaged or misaligned lower panel

• One base panel

• Disconnect power to the appliance before starting work and follow manufacturer safety instructions
• Typically accessed from the front by removing the kick plate or bottom drawer; keep track of fasteners
• Handle edges carefully — metal panels can be sharp

This is the appliance's main power on/off switch. It restores reliable control of electrical power to the unit so you can turn it on and off consistently.

• Controls AC power to the appliance's user interface and electronics
• Worn or stuck switch can cause no power, intermittent power, or inability to shut off
• Spongy or loose button feel may indicate internal switch failure

• Disconnect power before service to avoid electrical shock
• Access typically requires removing the control panel or console
• Note wire positions or take a photo before disconnecting
• Do not force tabs; transfer any clips or boots from the old switch if present

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This regeneration valve directs brine through your dishwasher's built-in water softener during recharge cycles, helping prevent hard-water film and spotting. Replacing a faulty valve restores consistent softening and better cleaning results.

• Opens to route salt brine through the ion-exchange resin during regeneration
• Helps maintain proper water hardness feeding the wash system
• Failure can lead to white film/spots, cloudy glassware, mineral buildup, and reduced cleaning
• Also contributes to inconsistent softener performance over time

• Disconnect power and turn off the water supply before servicing
• Access location varies by model; note hose routing and valve orientation during removal
• Inspect hoses and seals; replace if worn to prevent leaks
• Restore water/power and run a short cycle to check for leaks and proper operation

This replacement insert restores proper fit and finish for the appliance trim or accessory panel, helping to eliminate gaps, rattles and poor alignment for a cleaner, factory appearance. What it does

• Replaces a worn, broken or missing trim insert to restore a secure, finished edge
• Helps stop rattling or movement caused by a loose or missing insert
• Improves appearance by closing visible gaps at panels or trim
• Works as a simple mechanical/trim component — not a wiring or electronic part

• Disconnect power to the appliance before accessing panels or removing trim
• Many inserts snap or slide into place; a small screwdriver or trim tool may be needed
• Avoid forcing the part; if screws secure the trim, retain hardware and reinstall in original order