Shxm78w52n/11 Parts

This insulating part installs in the specified location to help reduce heat transfer between internal spaces and exterior panels. Replacing a worn or missing insulator helps protect nearby components and maintain proper operating temperatures.

• Provides a thermal barrier to limit heat transfer to surrounding panels and wiring
• Helps prevent scorching or heat damage to adjacent components
• Restores proper insulation where the original has deteriorated or is missing
• Common signs of failure: visible damage or fraying, burnt odor, or unusually hot exterior areas

• Disconnect power and allow the appliance to cool completely before servicing
• Wear gloves and eye protection; insulation fibers can irritate skin and eyes
• Match the original orientation/placement; do not over-compress the material
• Keep insulation clear of vents, heating elements, fans, and moving parts

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

This holder/retainer secures its mating part in the correct position inside the appliance, preventing unwanted movement and ensuring consistent operation. Replace a cracked or missing holder to restore a solid, factory fit and reliable performance.

• Supports and locks the attached component or rack/accessory in place
• Helps prevent vibration, rattling, or misalignment during use
• Typical signs of failure: broken tabs, visible cracks, looseness, or the part no longer staying secured
• Restores proper positioning of the related component for consistent function

• Disconnect power at the breaker; shut off water supply if applicable
• Note the holder's orientation; take a photo before removal
• Reuse existing screws/fasteners if none are supplied with the part
• Seat fully until it clicks/locks; do not overtighten into plastic

This insulating part provides protective thermal and electrical insulation for internal appliance components, helping keep wiring and nearby parts separated and shielded. Replacing a damaged insulator restores safe spacing and reduces heat-related wear. What it does:

• Provides thermal and electrical isolation between components to help prevent heat transfer and accidental contact
• Protects wiring and nearby parts from chafing and abrasion
• Helps reduce risk of shorts or intermittent electrical faults when insulation is intact
• Common symptoms of a bad or missing insulator: visible damage, melting or scorch marks, exposed wiring, or intermittent operation

• Disconnect power to the appliance before servicing to avoid electric shock
• Remove any necessary panels to access the damaged insulator
• Handle carefully to avoid tearing or compressing the material; replace with the identical part number

This insulating part provides a thermal and electrical barrier to protect nearby components and wiring from heat and to help reduce vibration-related contact. It's a simple replacement that restores safe spacing and insulation. What it does:

• Acts as a heat shield to limit heat transfer to adjacent parts and wiring
• Provides electrical insulation to prevent shorting where components are close
• Helps reduce rattling by stabilizing/isolating panels or components
• Supports proper component spacing for safe operation

• Disconnect power to the appliance before starting any repair
• Replace only in the exact original location and orientation
• Handle gently to avoid tearing or compressing the material
• If mounting hardware is damaged or missing, replace hardware per OEM instructions

This facia panel is the exterior front trim that covers the appliance door, restoring a clean finished look and protecting internal components. It replaces cracked, dented, or cosmetically worn door facia for a like-new appearance. What it does

• Replaces the outer door facia to restore the appliance's exterior finish
• Conceals and protects control assemblies and inner door components
• Helps prevent dirt and moisture from reaching internal door parts
• Addresses visible damage such as cracks, dents, deep scratches, or peeling

• One facia panel

• Disconnect power and water before starting any repair
• Door disassembly may be required; support the door and follow the appliance service manual
• Use correct fasteners and alignment to avoid binding; confirm clips and screw locations before tightening

This replacement frame restores the appliance's front cabinet trim for a clean, finished appearance and helps secure the control panel and door assembly. It's a direct-fit exterior trim piece designed to return proper alignment and protection. What it does

• Provides structural support and alignment for the front panel and control area
• Covers and protects internal edges from dirt, moisture, and impact
• Helps stop rattling or vibration caused by a warped or damaged trim
• Common symptom: visible damage, cracks, loose or misaligned front trim

• Remove power to the appliance before starting work to avoid electrical shock
• Small hand tools typically required; follow OEM disassembly sequence for access
• Handle trim carefully to avoid scratches; use a soft surface to rest parts
• If clips or screws appear damaged, replace them separately.

This is a replacement screw used to secure panels, trim pieces, and small brackets on compatible Bosch appliances — a simple hardware fix that restores proper fit and stops rattling or loose parts. What it does:

• Fastens outer panels, control bezels, or internal brackets to the appliance chassis
• Keeps panels aligned so doors and controls fit and operate correctly
• Stops vibration noise caused by loose or missing fasteners
• Replaces damaged, stripped, or corroded screws

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand to start, then snug; avoid over-tightening which can strip threads or crack panels
• If threads are damaged, replace the mating nut or threaded insert per OEM guidance

This access cover replaces a damaged or missing exterior panel to restore proper fit and protect internal components from debris and moisture. It helps maintain appliance appearance and prevents accidental contact with internal parts. What it does:

• Covers and protects internal components at the specified access point
• Helps prevent debris buildup and accidental contact with wiring or moving parts
• Restores a secure mounting surface for adjacent panels or controls
• Reduces rattles or vibration caused by a loose or broken cover

• One replacement cover (1 piece)

• Disconnect power to the appliance before beginning any work
• Installation may require basic hand tools; handle edges carefully to avoid cuts
• Align mounting tabs and fasten with the factory screws or clips; do not overtighten

The Dishwasher Water Inlet Valve is an OEM part for Bosch dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle.  

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.