Shxm78w52n/11 Parts

The Toe Panel Support Bracket is an OEM part for Bosch dishwashers. This part provides support and stability to the toe panel, which is the panel at the bottom of the dishwasher's front.

Causes of a bad part can include physical impact, improper installation, or general wear and tear over time, leading to weakening or damage of the support bracket.

Symptoms of a bad Toe Panel Support Bracket can include:

• Looseness or instability of the toe panel
• The toe panel becoming detached or falling off
• Difficulty in properly aligning or installing the toe panel
• Visible damage or cracks in the support bracket itself

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This operating module PRO is the electronic control board that manages user inputs and cycles for compatible appliances, restoring proper control functions and cycle selection. It's a direct-fit module used to replace a failed or intermittent control assembly. What it does:

• Interprets control panel commands and runs timed cycles and features
• Controls relays and signals to motors, valves, and heaters to complete cycles
• Replaces intermittent power-up, display errors, or unresponsive controls tied to the main control
• Helps resolve failures where the appliance won't start or stops mid-cycle due to control faults

• One operating module PRO control board

• Disconnect power before starting — risk of shock from live circuits
• Handle the board by edges and avoid touching electrical contacts
• Verify connector locations and orientation before removal; document wiring to ensure correct reassembly

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This outer door panel replaces a damaged or dented front panel to restore the dishwasher's appearance and protect internal components. It provides the external surface that you see and touch when loading and unloading dishes. What it does:

• Replaces the dishwasher's front outer door panel for cosmetic and protective repair
• Restores a smooth, secure surface where the control bezel and handle attach
• Helps stop drafts, moisture intrusion, and visible dents or scratches on the front
• Commonly used when the exterior is dented, scratched, or warped and needs renewal

• Remove power and water supply to the appliance before starting any repair
• Keep screws and fasteners organized; transfer existing hardware
• Inspect inner door components and insulation while door is open; replace damaged clips or seals as needed

This insulating part is a molded insulator that protects nearby components by reducing heat transfer and providing electrical isolation, helping prevent heat damage and short circuits for safer, more reliable appliance operation. What it does:

• Provides thermal insulation to limit heat transfer from hot components to surrounding parts
• Offers electrical isolation to help prevent shorts between conductors or grounded metal
• Maintains proper spacing and support for wiring or small assemblies
• Helps prevent symptoms such as scorch marks, melted wiring insulation, burning smells, or intermittent electrical behavior

• Disconnect power to the appliance before attempting any repair
• Inspect the surrounding area and the old insulator's location and orientation before removal
• Replace with the same part and orientation; avoid compressing or deforming the insulator

The Insert is an OEM component specifically designed for select Bosch dishwashers. Located inside the tub basin, the tines provide the necessary friction to help clean dishes. 

Causes of a bad insert can include mineral buildup that prevents proper movement or damage from dropped utensils that have bent the tines out of place.

Symptoms of a bad insert include:

• Dishes still feeling dirty after the wash cycle   
• Rust or mineral deposits visible on the tines
• Tines that are bent or missing which reduces cleaning surface area

Replacing the insert with this OEM Bosch part restores optimal cleaning performance. Compatible with 300 series models, it features stainless steel construction that withstands corrosion from detergents. This replacement insert is warranted to perform as the original Bosch design for reliable dish cleaning.
 

This Bosch Dishwasher Insert is an OEM part for Bosch dishwashers, specifically designed to enhance the interior functionality of your appliance. The insert is a vital component that aids in the organization and secure placement of dishes, utensils, and other items during the wash cycle.

Common causes of damage to a dishwasher insert include physical strain from overloading, exposure to high temperatures and harsh detergents, and general wear and tear. These factors can lead to warping, cracking, or the breakdown of the insert's structure.

Symptoms of a bad insert include:

• Difficulty in fitting dishes and utensils properly.
• Reduced cleaning effectiveness due to improper loading.
• Noticeable cracks, warps, or breakage in the insert structure.
• Loose or unstable compartments within the insert.
• Difficulty in sliding or securing the insert inside the dishwasher.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

Left side

The Dishrack Slide Rail is an OEM part for Bosch dishwashers. This part provides the metallic rails that the dish racks smoothly glide along during loading and unloading. Its precision-engineered design facilitates quiet and reliable extension and retraction of racks for easy access to washed items.

Causes of a bad Dishrack Slide Rail out include wear from continual use and damaging rails or their components over time. Damage from impacts or weight could also diminish rack movement.

Symptoms of issues include:

• Difficulty fully extending or retracing the racks
• Noisy, grinding rack operation
• Racks that do not smoothly slide or become stuck partially out

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.