Shxm78w56n/10 Parts

The Toe Panel Support Bracket is an OEM part for Bosch dishwashers. This part provides support and stability to the toe panel, which is the panel at the bottom of the dishwasher's front.

Causes of a bad part can include physical impact, improper installation, or general wear and tear over time, leading to weakening or damage of the support bracket.

Symptoms of a bad Toe Panel Support Bracket can include:

• Looseness or instability of the toe panel
• The toe panel becoming detached or falling off
• Difficulty in properly aligning or installing the toe panel
• Visible damage or cracks in the support bracket itself

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

The Operating module PRO is the electronic control board that manages user controls and oven functions, restoring responsive touch/display operation and reliable command processing for compatible Bosch cooking appliances. What it does

• Replaces the main control board that interprets user inputs and runs oven control logic.
• Restores responsive touchpad/display behavior when controls are unresponsive or erratic.
• Resolves symptoms like blank or frozen display, unresponsive buttons, or incorrect oven cycles.
• Works with associated wiring harnesses and sensors to coordinate heating, timers, and status feedback.

• Disconnect power at the household breaker before starting any repair to avoid shock.
• Handle the board by the edges and avoid static discharge; use a grounded strap if available.
• Verify connector alignment and seating; do not force pins or terminals.

This access cover replaces a damaged or missing exterior panel to restore proper fit and protect internal components from debris and moisture. It helps maintain appliance appearance and prevents accidental contact with internal parts. What it does:

• Covers and protects internal components at the specified access point
• Helps prevent debris buildup and accidental contact with wiring or moving parts
• Restores a secure mounting surface for adjacent panels or controls
• Reduces rattles or vibration caused by a loose or broken cover

• One replacement cover (1 piece)

• Disconnect power to the appliance before beginning any work
• Installation may require basic hand tools; handle edges carefully to avoid cuts
• Align mounting tabs and fasten with the factory screws or clips; do not overtighten

This insulating part is a molded insulator that protects nearby components by reducing heat transfer and providing electrical isolation, helping prevent heat damage and short circuits for safer, more reliable appliance operation. What it does:

• Provides thermal insulation to limit heat transfer from hot components to surrounding parts
• Offers electrical isolation to help prevent shorts between conductors or grounded metal
• Maintains proper spacing and support for wiring or small assemblies
• Helps prevent symptoms such as scorch marks, melted wiring insulation, burning smells, or intermittent electrical behavior

• Disconnect power to the appliance before attempting any repair
• Inspect the surrounding area and the old insulator's location and orientation before removal
• Replace with the same part and orientation; avoid compressing or deforming the insulator

This outer door panel replaces a damaged or worn exterior door surface to restore appearance and protect internal door parts. It provides the finished outer surface that customers see and touch on the appliance. What it does:

• Replaces a dented, scratched, or rusted outer door surface
• Restores the appliance's finished exterior and curb appeal
• Protects internal door components and insulation from damage
• Helps maintain a proper seal by providing correct door alignment

• One outer door panel

• Remove power (unplug or switch off breaker) before beginning work
• Some installations require removing the inner door panel, glass, or trim; handle and hardware may be separate
• Use appropriate hand tools; avoid bending or scratching the new panel during install

The Insert is an OEM component specifically designed for select Bosch dishwashers. Located inside the tub basin, the tines provide the necessary friction to help clean dishes. 

Causes of a bad insert can include mineral buildup that prevents proper movement or damage from dropped utensils that have bent the tines out of place.

Symptoms of a bad insert include:

• Dishes still feeling dirty after the wash cycle   
• Rust or mineral deposits visible on the tines
• Tines that are bent or missing which reduces cleaning surface area

Replacing the insert with this OEM Bosch part restores optimal cleaning performance. Compatible with 300 series models, it features stainless steel construction that withstands corrosion from detergents. This replacement insert is warranted to perform as the original Bosch design for reliable dish cleaning.
 

This Bosch Dishwasher Insert is an OEM part for Bosch dishwashers, specifically designed to enhance the interior functionality of your appliance. The insert is a vital component that aids in the organization and secure placement of dishes, utensils, and other items during the wash cycle.

Common causes of damage to a dishwasher insert include physical strain from overloading, exposure to high temperatures and harsh detergents, and general wear and tear. These factors can lead to warping, cracking, or the breakdown of the insert's structure.

Symptoms of a bad insert include:

• Difficulty in fitting dishes and utensils properly.
• Reduced cleaning effectiveness due to improper loading.
• Noticeable cracks, warps, or breakage in the insert structure.
• Loose or unstable compartments within the insert.
• Difficulty in sliding or securing the insert inside the dishwasher.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

Left side

The Dishrack Slide Rail is an OEM part for Bosch dishwashers. This part provides the metallic rails that the dish racks smoothly glide along during loading and unloading. Its precision-engineered design facilitates quiet and reliable extension and retraction of racks for easy access to washed items.

Causes of a bad Dishrack Slide Rail out include wear from continual use and damaging rails or their components over time. Damage from impacts or weight could also diminish rack movement.

Symptoms of issues include:

• Difficulty fully extending or retracing the racks
• Noisy, grinding rack operation
• Racks that do not smoothly slide or become stuck partially out

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.